The pft G5 is an amazing machine really speeds up the job ,but it fairness if an experienced 4 man team can only do 40 sq meters of base coat and a top coat there's something wrong they should easily knock out 60-70 meters plus I would think the finish on the hand applied top coat would be better
The Knauf gear would of looked like crap and probably had a good chance to crack. 5 hours the last 40 meters would of probably been on the wall for 3 hours at most, its simply not finished, you could probably sink your finger all they way through to the block work around the 100m mark. This video is bias to the the least. The proper plasterers ill call them. They done a decent job but i doubt their finish would be up to much either, i bet they where pulling the half set hardwall all over trying to trowel the finish. I challenge you to re-make this challenge... No time limit only stipulation should be a acceptable finish. MP finish would still be quicker but i bet its not 58% quicker than what your video is making out and the finish and durability will be nothing compared to BG.
Cracks depend on many factors, like the material you are using, the surface preparation, the masonry etc. They are not related to the fact spraying the plaster or not.
Please send me an e-mail to pft@pft-sistemas.es indicating in which country you are and I will bring you into contact with a local dealer or representative. Thank you
Das kommt darauf an, was für eine Ausstattung man braucht. Am besten eine E-mail an info@pft-iphofen.de schicken, mit möglichst kompletten Angaben zu Standort und gewünschter Anwendung.
Hi dean barrs, can you send me an e-mail to pft@pft-sistemas.es with your contact details and geographical localization? I will then get you into contact with the right people.
+PFT Sales Area West (Africa, South America, Spain, France, Portugal) If you dont mind, Can you please email me some details about this machine. waelabbas1986@gmail.com
Good for everyone but the plasterers.... The plasterers spraying the mud on will get laid off today while the other guys still have another day... day and a half of work left...
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
I HAVE BEEN FAMILIAR WITH PFT MACHINES FOR 20 YEARS ..TOP OF THE LINE PUMPS .....
The pft G5 is an amazing machine really speeds up the job ,but it fairness if an experienced 4 man team can only do 40 sq meters of base coat and a top coat there's something wrong they should easily knock out 60-70 meters plus I would think the finish on the hand applied top coat would be better
Okaaay so the narrator tells us that the professional observers were impressed, but not a single interview. Seems legit.
Hand team are working back to front and they are a well slow squad, a decent squad would do a lot more
Super 👌
subskruje 👍
I like this machines
In which country do you work in this field, and is this work available?
I love plaster machine PFT
The Knauf gear would of looked like crap and probably had a good chance to crack. 5 hours the last 40 meters would of probably been on the wall for 3 hours at most, its simply not finished, you could probably sink your finger all they way through to the block work around the 100m mark. This video is bias to the the least.
The proper plasterers ill call them. They done a decent job but i doubt their finish would be up to much either, i bet they where pulling the half set hardwall all over trying to trowel the finish.
I challenge you to re-make this challenge... No time limit only stipulation should be a acceptable finish. MP finish would still be quicker but i bet its not 58% quicker than what your video is making out and the finish and durability will be nothing compared to BG.
Is this work plaster PE wall cladding available in Australia
As far as I know they are not selling MP75 in Australia, but it would be better to confirm with Knauf locally.
Spray plaster often resulted to cracks than manual. I have observed this in my first 5 yrs experienced as quality control.
Cracks depend on many factors, like the material you are using, the surface preparation, the masonry etc. They are not related to the fact spraying the plaster or not.
Wetter plaster shrinks more and cracks more
We made 270 squaremeters in 5 hours today with a pft g4 and 3 man
Cette machine est-elle disponible en Algérie?
Les machines PFT sont disponibles en Algerie.
Те кто штукатурили руками качество идиал, а те кто машиной в хлам все
اين اجد هذه الماكنه شكرا لكم
Please send me an e-mail to pft@pft-sistemas.es indicating in which country you are and I will bring you into contact with a local dealer or representative. Thank you
PFTSPAIN
+حسن العراقي شركة المانية يوجد لها فروع حوال العالم وفي الشرق الاوسط
Wie viel kostet diese Einheit?
Das kommt darauf an, was für eine Ausstattung man braucht. Am besten eine E-mail an info@pft-iphofen.de schicken, mit möglichst kompletten Angaben zu Standort und gewünschter Anwendung.
10.000€ and you need 32AMPs 380volt.
The Gang of manual plasterers wouldn’t earn much on a price if they can only average 10m2 each in 5 hours
I would like to know more about this machine can any body put me into contact with the right people many thanks
Hi dean barrs, can you send me an e-mail to pft@pft-sistemas.es with your contact details and geographical localization? I will then get you into contact with the right people.
Hi my email deanbarrs@yahoo.co.uk thanks
+PFT Sales Area West (Africa, South America, Spain, France, Portugal)
If you dont mind, Can you please email me some details about this machine.
waelabbas1986@gmail.com
In any country, then shoot this video
I knoe more easy way for plaster with ur machine
Good for everyone but the plasterers.... The plasterers spraying the mud on will get laid off today while the other guys still have another day... day and a half of work left...
Stupidity reigns supreme with these companies.........or is that a tower crane working overhead and dropping steel beams.
Estás usando un traductor? No hay quien entienda tu comentario...