I built my ETM with 4 LX vac motors, when I turn the 4th vac on, the thing is like a gas truck mount and sounds like a gas truck mount. Crazy suction, I haven't put a meter on it yet, so I don't know the numbers. But it's pretty crazy, and I will never buy a gas truck mount.
Sounds a very strong suction. As long as you don't have any loss of air flow you can go long hose runs with it np. I would also never switch to a gas truckmount. My system is exactly the same with similar power.
@@carpetcleaning999 I had thought about going cuffless for a long time, but when I saw your video and see the kind of results you're getting without hose cuffs I went to work in a hurry, and I even gone a little further than you, I've also gone inline filter-less. I never really liked inline filters, and the Mytee piglet sock filters I always felt like they rob my cfm a little, I had told myself when I build my ETM I would build it in a way where I won't have to use an inline filter. Basically, I built it in a way where the trash drops into a mesh basket inside the ETM, empty it then rinse it out at the end of the day. Now with 4 LX vac motors, no inline filter, no cuffs now the only problem I have now is it's hard to hear my phone because my wand is always at me but I ain't mad though. Now I have a ton of flash cuffs I can put on eBay. This has to be one of your best videos!
I have to make a separate video for this. Remember, this is not the same cfm as they measure. The numbers that I was showing was just a number with some settings.
You have it figured out this video should be viral! Such. Great video for us porty cleaners 🎉
Thanks so much!!
Good job, man.The video that you did, you're helping us little guys out there.Thank you
Glad to help
Great video. What wand is that?
That's the vantool wand.
Turn on the booster first the Manson
Love that showcase of rotovac cfm great clean learn a lot
2 zx in series and the booster is a 6.6. I think if the booster was also a zx or an lx I would get more suction.
@@carpetcleaning999 was the booster in series or parallel?
I built my ETM with 4 LX vac motors, when I turn the 4th vac on, the thing is like a gas truck mount and sounds like a gas truck mount. Crazy suction, I haven't put a meter on it yet, so I don't know the numbers. But it's pretty crazy, and I will never buy a gas truck mount.
Sounds a very strong suction. As long as you don't have any loss of air flow you can go long hose runs with it np. I would also never switch to a gas truckmount. My system is exactly the same with similar power.
@@carpetcleaning999 I had thought about going cuffless for a long time, but when I saw your video and see the kind of results you're getting without hose cuffs I went to work in a hurry, and I even gone a little further than you, I've also gone inline filter-less. I never really liked inline filters, and the Mytee piglet sock filters I always felt like they rob my cfm a little, I had told myself when I build my ETM I would build it in a way where I won't have to use an inline filter. Basically, I built it in a way where the trash drops into a mesh basket inside the ETM, empty it then rinse it out at the end of the day. Now with 4 LX vac motors, no inline filter, no cuffs now the only problem I have now is it's hard to hear my phone because my wand is always at me but I ain't mad though. Now I have a ton of flash cuffs I can put on eBay. This has to be one of your best videos!
@@lovingeachothernowohh wow that's awesome. I also noticed no suction loss when I have removed those cuffs. That's how I was at 400 feet with 3 vacs.
@@carpetcleaning999 You know there's a way to connect a 1.5" tool to a 2" hose without using a reducer or 1.5" cuff.
@@lovingeachothernowwhat's the way?
Check the pressure when you are working on the second floor!!
Do you mean the psi on my pump? I did, and with 400 feet of hose run, the pressure was the same.
Great demo/use EHS!
IS Your Van insulated with Foam?
Yes it is insulated because of cold winters here.
Could you share how you got your anemometer to read in cfm please?
I have to make a separate video for this. Remember, this is not the same cfm as they measure. The numbers that I was showing was just a number with some settings.
What motors do u run lx or zx motors
2 zx and the booster is 6.6. I think I will get more suction power if I had the booster as a zx or lx.