Admire the fact of you're using itch and guidelines. I like precision and attention to detail. Always evaluate a craftsman by how he maintains his work environment. Yours is tip top. Well done Sir 👏
I love the esthetics of this knife and the scabbard you made for it. Out of all the knife and sword builds I watched during the pandemic and after, this is probably my favorite.
Nice work as always! I do miss your older videos with a lot less machining - showing you don't need really high end equipment- but you have so many of those and proved that point already so its neat to see you doing some interesting builds. Also I really like seeing you use a metal cutting bandsaw instead of the angle grinder- to me thats one of the first machines (after belt grinder) any knifemaker should buy. Angle grinders are too dangerous.
@@Дмитрий-ч7я4к Дружище,наверняка ты прав,и думаю, что ковать ножи, всё таки сложнее, а этот мастер не только его закалил, но и рукоятку сделал шикарную. Всё таки танто сделать это умение иметь нужно.
Nice work, but you made one "fault"! Please change the Pin for a new one :D do it like you did BUT tighten it without the handle, then mark the direction of the slit, and get the slit in cutting direction (or 90°) (perhaps make it from Brass if you get your hand on a brass screw, that would be even better) :D
Delicious precision fits, Koss! Loved the color of the habaki and bog oak with stunning grains and shape of the seppa, all fitting for the blade size. Was that a commercial brand for masking the hamon...name please?? Thanks Always for the treats and great videography! Hat Tip, ~PJ
One more innovative project under your belt 👌🏻 Looking at that handle makes me want to ask have you ever done, or considered doing, checkering on the grips like you would find on a pistol grip?
This is excellent work, Obviously I need to get some better power tools. But with that being said. I only saw a hammer used once to make the amount, and no shaping of the blade. Or to say forging and shaping the blade. Maybe I'll stick to other made knives
Tout à la machine , c’est un assembleur mais certainement pas un coutelier et encore moins un forgeron. J’ai vu travailler à Thiers Monsieur Vialon deux fois MOF , c’est un autre monde .
nice work! you probably hear that a lot, but may i ask why you dont properly forge your knives like a blade smith? it wastes way less material, creates a stronger, more flexible blade and i also imagine forging work to be much more fun and less dirty than grinding tons of steel away... just curious.
Admire the fact of you're using itch and guidelines. I like precision and attention to detail. Always evaluate a craftsman by how he maintains his work environment. Yours is tip top. Well done Sir 👏
I love the esthetics of this knife and the scabbard you made for it. Out of all the knife and sword builds I watched during the pandemic and after, this is probably my favorite.
I haven't seen the scabbard.
Using cool tools and awesome skill to make awesome stuff. This is the way.
It looks so strong and clean! And a really good fit to the hand as well! Once again dude - super-super well-done top job 👏👏👏. Thanks for sharing 🙏. 😎
Прекрасная работа!
Привет из Белоруси! 🇧🇾
Беларуси) я тоже из этой страны
A nice knife and a true work of art.
Outstanding craftsmanship and design .
Nice knive .😅😊I lije it. Good Job
Krásná práce 👍🏻👍🏻👍🏻
Always love your work. Beautifully simple and unique designs.
Nice knife
Hi 👋 there Koss?!! Hmm I think it's a gorgeous 😍 and unique tanto style nice work 😊
本来の刃紋は性質の違う金属同士の差異で発生しますが、このビデオでは焼入れするときの工夫で刃紋を再現していますね
見た目が美しいです👍
Totally a work of art
Hello mister beautiful knife Beautifully made well done
I love how you used a white line in the dark wood. I usually just use a pencil line on dark wood and squint.
beautiful tanto and hamon Koss
Nice work as always! I do miss your older videos with a lot less machining - showing you don't need really high end equipment- but you have so many of those and proved that point already so its neat to see you doing some interesting builds.
Also I really like seeing you use a metal cutting bandsaw instead of the angle grinder- to me thats one of the first machines (after belt grinder) any knifemaker should buy. Angle grinders are too dangerous.
Thank you for your support) This has allowed me to acquire some useful tools that I will use for my projects.
Really stunning knife, man! Crazy beautiful work! 😃
Stay safe there with your family! 🖖😊
thnak you =)
Beautiful as Always 😊
Veramente bravo questo signore, con tanto mestiere, e passione. Realizza coltelli perfetti. Bravo
Amazing work, 👏👏
Великолепная работа!👍
Great work and beautiful knife! Cheers!👍😀🛠️🔧
As always....amazing work
Captivating viewing. Well done on a top result. 🦘🦘🦘
Fantastic build
Beautiful
Beautiful! 11/10❤
Very beautiful knife man, good work.
Fantastic !! I dream of owning a Knife like that so spacial.👍👍
Даааа, это работа мастера.👏👏👏🤝
Мені одному здалося що по радіо українські пісні були? Гарний витвір. Якість виконання взагалі супер. Вітання з Харкова
Харьков - русский город!
@@MaaKSii как ты развязался, дурачок?
Beautiful work. Absolutely next level.
Рад, что ремесло оружейника никогда не исчезнет! Профессиональная работа, качественный результат, браво мастеру!👍👍👍
а то что ручка на клею и от воды рассыпится и можно остать ся с кучей деталей вместо ножа не пугает 😂 это просто понты а не работа
@@2024x2 Думаю, что это действительно МАСТЕР и клей не бумажный 😄🗡! Всё-таки клей клею рознь!
Кованные ножи лучше чем вырезанные из куска металла
@@Дмитрий-ч7я4к Согласен
@@Дмитрий-ч7я4к Дружище,наверняка ты прав,и думаю, что ковать ножи, всё таки сложнее, а этот мастер не только его закалил, но и рукоятку сделал шикарную. Всё таки танто сделать это умение иметь нужно.
Good job 👍👍👍👍👍
That’s perfect
You are a genius
New video. New tanto. Impressions from the video and the work, as always, are the best.🔪👌
thank you)
Fantastic build. And a great tutorial. Thanks for sharing
Nice work buddy
I see it as very wide in blade, I never saw it screwed to the handle, equally beautiful piece
You make some beautiful stuff
Beautiful knife.
Круто🎉 молодец💪
That hormone pattern is crazy. Didn’t knew that until could replicate it without folding steel with different types of steel.
Nice work, but you made one "fault"! Please change the Pin for a new one :D do it like you did BUT tighten it without the handle, then mark the direction of the slit, and get the slit in cutting direction (or 90°) (perhaps make it from Brass if you get your hand on a brass screw, that would be even better) :D
Que bonito!! Excelente trabajo. Te felicito 😉
Delicious precision fits, Koss! Loved the color of the habaki and bog oak with stunning grains and shape of the seppa, all fitting for the blade size. Was that a commercial brand for masking the hamon...name please?? Thanks Always for the treats and great videography! Hat Tip, ~PJ
Right-handy orc-skinner there. 😁
All comentss praise him a lot but me I praise the the machine he use .. a true black smith use only hummer with his bare hand ..
The machines are nice to speed up the process, but you still need the knowledge.
One more innovative project under your belt 👌🏻
Looking at that handle makes me want to ask have you ever done, or considered doing, checkering on the grips like you would find on a pistol grip?
beautiful as always !
Beautiful work
Awesome 👍
Simplemente Hermoso 🤘🤘
Beautiful, thanks.
10:25 what is the brass blackening process called? What chemicals are used in it?? Thanks in advance.
Awesome results BTW!!
Edit: typo
You are great!
You make what isn’t seem easy!
All my compliments!
Renato
Watching you work is a kind of magic. Pure aesthetic of the handmade craftsman 🎉
Primoroso trabalho 👏🏻👏🏻👏🏻
This is excellent work, Obviously I need to get some better power tools. But with that being said. I only saw a hammer used once to make the amount, and no shaping of the blade. Or to say forging and shaping the blade. Maybe I'll stick to other made knives
Stupefacente creazione 😮💪🙂💯
Perfection!
What was that process in the jar? It made the bronze super cool looking
i really like your woodworking and smithing, maybe you could consider trying a reversed knife with wooden blade and metal grip
why would anyone have such disdain for the natural order?
@@mrkikySome people just want to watch the world burn.
@@mrkiky maybe because they're a bot? 😂
Завораживающее зрелище.
С такими стонками можно любой сложности ножи делать, ты попробуй в ручную
You make it look too easy, brilliant. What was the process with the brass in the jar?
This is the process of brass patination using ammonia fumes
Beautiful...
Dope AF results, @Koss_channel! Now it needs an equally dope sheath/scabbard to complete the package!
Beautiful knife, pls make a leather coted sheat
Кросівоє)
Tout à la machine , c’est un assembleur mais certainement pas un coutelier et encore moins un forgeron.
J’ai vu travailler à Thiers Monsieur Vialon deux fois MOF , c’est un autre monde .
Que lâmina e trabalho magníficos
awesome. Now for a sheath....
Mantap 👍👍👍👍
esto si que es cine.
What kind of belts do you use? Those cut impressively fast.
Very nice! Sheath?
hope it will be ready next week =)
Amazing
При таком великолепном оснащении мастерской и золотых руках можно было бы более внимательно отнестись к аутентичности ножа.
That’s a very nice blade indeed , what’s the purpose of scratching the glass bottle? Is that to make sure the edge is tempered properly?
Great video! What is the process that you used to turn the hibaki black? I’ve never seen that done before
This is a method of patination brass with ammonia fumes
nice work! you probably hear that a lot, but may i ask why you dont properly forge your knives like a blade smith? it wastes way less material, creates a stronger, more flexible blade and i also imagine forging work to be much more fun and less dirty than grinding tons of steel away... just curious.
None of them do
very wrong. professional knive makers do. thats why they are called bladesmith! they forge. check out neil kamimura for instance
5:02 sorry,what is it?,what name?
Pekná práca...
вітаю! а звідки в вас сталь 40х13??? я думав ви в штатах занаходитесь...
Теж так думав, поки не почув "люди як кораблі" в відео
@@Druh_hrub І пляшка фірми "Хімрезерв".
What is the overall length of tanto
I just remeasured it, the total length is 172 millimeters.
awesome video. QQ, what is that you're using @ 5:00 and @ 10:29 what are you doing here?
Me encantó, porque no rifas el cuchillo entre tus suscriptores!
Show parabéns irmão ainda chego la
Здравствуйте! 👍 А в парах чего обрабатывали детальку?
Hello! What did you process the part in pairs of?
Хлорное железо
@@Самаркадну я платы хлорным железом травлю. Оно или растворяет железо или от его паров оно ржавеет. Такого воронения не наблюдаю.
I don't get how the machine at 0:15 fixes the piece of metal ti the table,
What is it called so I can look it up?
The part is held in place by magnetic force.
Мощный магнит рискованно
Request knife Prince Zuko, Avatar the legend of Aang 🙏🏼
YESSS . ANOTHER AVATAR VIEWER
Awesome
What did you dip it in to turn it black?
Me gusta mucho, los Tantos James. Yo tengo uno y no valió Barato y todo para tener lo de Adorno.
Thats a great idea with the pin. Im like "why is he threading that hole?"
Man what kind of bandsaw blade are you using to cut the profile?