Easy way!! Control Multiple Servo with Raspberry Pi
HTML-код
- Опубликовано: 4 сен 2024
- Raspberry Pi 4 - 4GB :: bit.ly/2YYXpum
Adafruit 16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685
bit.ly/2GEtIq7
Adafruit PCA9685 Python library
github.com/ada...
Adafruit 16 Channel Servo Driver with Raspberry Pi
Servo motors are often driven using the PWM outputs available on most embedded MCUs. But while the Pi does have
native HW support for PWM, there is only one PWM channel available to users at GPIO18. That kind of limits your
options if you need to drive more than one servo or if you also want to dim an LED or do some sort of other PWM
goodness as well. Thankfully ... the PI does have HW I2C available, which we can use to communicate with a PWM
driver like the PCA9685, used on Adafruit's 16-channel 12-bit PWM/Servo Driver!
Share, Support, Subscribe.!!!!!!!
Subscribe: / @makertutor101
Please Donate To Help Me Afford New Equipment And Software To Make My Videos More : goo.gl/1m8Dg2
→ Don't forget to subscribe!
🌟Love you all! 💕
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission at no extra cost to you!
THIS VIDEO IS FOR EDUCATIONAL PURPOSES ONLY!
I cannot thank you enough, this video is the only reason I was able to actually make the board work! Keep up the good work!
Recommended power supply is 5v 2A
Hello, I have a little problem with your tutorial and know that I have an error when I run the simpletest.py program. The error is No module named Adafruit_PCA9685. PS I did exactly what you did -_-
do you have an idea i'm a taker
Thanks, I stumbled upon the same issues and this made it super easy to go on
Thank you, you helped me to solve the issue I was having :)
Hello, thank you for this amazing tutorial. Quick question, does the servo driver need power when it is connected to Raspberry pi which already has power. i will only connect 3 motor to that.
Nice Explanation,Madam.Needs More.
Having an issue with the servo driver. Everything is good until I add the fifth servo. Once I do, the black diode next to the capacitor burns up. Any thoughts?
May I ask at 0:54, which software is that?
Many Thanks!
Does this work whith stepper motors too??? Heve a nice day!
Hi, what power supply did you use for the motors? (Volt & Amp)
I have a 5V 4A power supply connected to the PCA9685. The most important part to match is the 5V, as the current (amperes) are drawn as needed.
I am driving 18 servos for a hexapod robot project using two PCA9685 by chaining 2 of them. The problem I am facing is the jitter problem. I don't have the knowledge to solve it. Please help me
16 channel means I can connect 16 servo motors to this motor driver. right?
А сколько максимум серво моторов можно подключить? И чтобы ими можно было управлять отдельно.
I get this error
runtimeerror : could not determine default i2c bus for platform
I have enabled i2c interface, how I solve this error?
Hi.. I have 8 servo Sg90. What power supply for these all servo (volt and ampere)?
Thank you you help me to slove issue
i have an error: module 'Adafruit_PCA9685' has no attribute 'PCA9685'. I don't know why. Can you have me fix this. Thank you so much
It would be nice to see a tutorial how to control multiple mg995 over ethenet mqtt :)
I still can't find a video that works with my board, I have the 16-Channel Servo Driver HAT for Raspberry Pi (12-bit I2C) and if anyone can help me I would greatly appreciate it (I use python code, not the terminal)
Anyone Please help me find what software to design my projects on ? Like they use in the video to draw the pin connections. Thanks
Fritzing
@@denon9000cd Thanks, just got it and its great. now i can do it on the computer instead of scraps of paper ;-)
a previous video youve posted about potentiometers controllong leds in neopixel, the linked code does not work. if you please could fixs that it would be greatly appriciated.
have good day:)
after executing the command "python simpletest.py" I got the error "ImportError: No module named Adafruit_PCA9685". Any ideas?
use python 2.7.. dont use thonny
i have err: module 'Adafruit_PCA9685' has no attribute 'PCA9685'. plese told me how to fix them :((. Thank you somuch
Hello, Can you please explain me what are the second and the third parameters of pwm.set_pwm()
which software are you using for simulation
how to control servo motor with keyboard righet und left, middle, with raspberry pi, do you know write cod
Can please someone give me the link for the Raspberry pi simulator that she uses in his video?
I have a Raspberry Pi Zero and Phyton3 and I could not install:
sudo pip3 install adafruit-circuitpython-servokit
Can anyone help me, please?
Will this work on a raspberry pi zero?
What's the simulator u use this video?
Fritzing
Hi can Multitasking operation? Need free rtos?
I want to do this...to connect 30s
which programm do u use?
Fritzing
I made it! thanks to you!!
Can I also control 16 12V DC motors ??
Which power supply are you using?
Can u add an esc too?!
What do you use to power your motors?
External power 5v 2a
How to connect raspberry with ssc from rtrobot?
Can i get multiple servo motor code for raspberry pi ?
Good tutorial!!
Hi sir, make multiple stepper use raspi pliss
Thanks!
What os is install on de rpi
Top parabéns
Doesnt work with python 3..?
Thank you. This video was very helpful! :)
Amazing video! God bless. Always remember Jesus Christ loves you!❤️🙏
Can we make a dog form this
Nice
i feel bad for the 2nd servo being slapped by the 3rd one
Could you help with ax-12a servo with arduino??
El sueño de conoserte
While this is interesting, unfortunately running servos one at a time has no real applications, unless you only have one servo to control something very simple. Have you tried to run at least 2 of them simultaneously?
I2c single bus addressing basically. You guys look it up. You'll thank me later
Cutie
Tats not control.. Control means using keybod, joystick etc.. This is more of a demo.
What os is install on de rpi