I haven’t watched Wheeler Dealers since Edd left either. And when I did watch it, I used to record it and fast forward through the Mike bits. What Edd does is truly fascinating and for the life of me, I can’t see why he doesn’t have his own show. I’d pay for that in a flash.
@@tinman9341 well I think Ed said they wanted to cut a lot of corners instead of showing more fixing. Thr new show you can see that . But yes an ed and ant and Mike reunion should be in the cards
They sabotaged their show....Edd was the reason why mass watched the show. They even tried to run it with Mike as stand alone but then it went to new low 😂
The sierra still blew out blue smoke on the drag strip at the end of the show so there was still another issue maybe a worn turbo or blocked breathers possibly even rings on the way out
What they didnt tell you was the real way to check if its rings or valve seals.. pull plugs, do a compression check. If you have a low cylinder, put a splash of oil in, then recheck. If it goes up you have bad rings. If not then your issue is in the head. OR if its just the smoke it could be a leaking oil seal in the turbo. So much info left out...
Big Edd is sadly missed on tv now. This show used to be brilliant until Mike the back stabber put money before friendship and quality programming. WD’s is diabolical now, no disrespect to Ant.
6:45 Instructions not clear.... how do I rebuild my head Edd? If i remove my eyes i wont be able to see what I'm doing? Also if I remove my brain will i still survive? Could I rebuild my head in the shed or is a clean environment essential to prevent diseases when I open up my head? Also should I ask Paul to give me a hand? Or a ear? Ed rebuilding a head, I think certainly Nose what hes doing.
Hi Ed, where is Mike...., I thought that you both is Team..isn't it? What make the vid is interesting, there are Business too ; Buy, repairs and Sale. That's Fun man...Sorry the vlog for only car repairing was plenty in youtube. Hope you both back as Old session. Wheeler Dealer show. Thank's
Same way as he says, as he runs his finger along the bore "It looks as if this engine has recently been rebuilt". You can look and see the crosshatch and tell that. And I would not have broke the motor apart to figure this out. It's called a leak down test.
Seriously, Edd? You should have done a leakdown test to determine where the issue was before taking the head off. Every time one of these gets posted, I get my hopes up that Edd is back....
@@jimmieandersson813 It can tell you there's nothing wrong with the combustion chambers themselves, which means the oil must be coming in through the intake. In which case it would probably be the valve guides or the turbo.
or of course the most likely scenario with a Ford could be the fault, the valve stem oil seals. no need to remove the cylinder head on most Ford engines as theres usually a tool to change the seals in situ. either this was all done for the sake of TV OR they already KNEW there was other issues.
Edd China: Removes Cylinder head in 1 hour. Me: Spends 20 minutes looking for lost sockets. Can't undo hose clamps as they're really fiddly. Rounds off a nut and have to grind it off. Grinder slips and damages other hose. Coolant spilled all over driveway. Falls of on slippy leaves. Reward self with cup of tea and biscuit for achieving 2% of the job.
Best part is you only get 10 minutes of the show showing Edd at his best then a message from Mike asking you to subscribe, It's Mike that is fleecing people getting revenue from this scam. Suggest you don't subscribe.
Before i even get a minute into this,im gonna say rings because its a cosworth,its boosted, and prolly owned by a college kid previously so ya,rings def gonna need to be done
Good evening really one of your biggest French fan we would like the voiceover in French and the really you would have in addition the 66 million French that would follow you good evening
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
I haven’t watched Wheeler Dealers since Edd left either. And when I did watch it, I used to record it and fast forward through the Mike bits. What Edd does is truly fascinating and for the life of me, I can’t see why he doesn’t have his own show. I’d pay for that in a flash.
Do you watch edd china's new show on his RUclips channel?
Love these old episodes with Edd. My hat goes off to Ant but the series isn’t the same without Edd.
Ain't that the truth.
The way Edd left the show also leaves a lot to be desired.
He had to fight to get his own tools back apparently.
Same respect allotted for Mike, but wheeler dealers is the house that Edd built
Still good. I would love to see both working on a car together. I do see how they cut corners per Ed.
@@sschevmale24 that would be great!!! I’d liked to see all friendships mended and for all parties to move on.
@@tinman9341 well I think Ed said they wanted to cut a lot of corners instead of showing more fixing. Thr new show you can see that . But yes an ed and ant and Mike reunion should be in the cards
WD in its heyday before the Yanks messed it up
Graeme Hill ...🖕🏻🖕🏻🖕🏻....
Haven't watched wheeler dealer since Edd left...not the same
How do you know if you havn't watched it? I have, and it's still good. But sure not as good as Edd :P
@ What i know? Can't you read? I just said it's still good. I might be a git... but a gifted git that learned to read at least.
correct. i watched a few episodes without Edd and still no good.
Edd is an educated engineer. the new presenter is a fake..just a presenter reading script someone else does the work
@@langraman8756 no edd is a fake mechanic now ist 1000 times better
Edd was so informative and made any mechanical task so easy while keeping himself clean ...very classy
HOLY snowflakes batman
They sabotaged their show....Edd was the reason why mass watched the show. They even tried to run it with Mike as stand alone but then it went to new low 😂
I mean not really lol
Really enjoy watching Edd!
I miss the old show. Not too fond of the new one, which might be done now. I haven’t seen an episode in a while.
jim s they still make em
Gotta love how they still post videos of Edd..
Edd the king of engineering, My favorite drimer car😉😉😉😉😉😉
And up pops Mike's Carnival Barker head trying to sell You on the WD Series without Ed. Shameless.
The sierra still blew out blue smoke on the drag strip at the end of the show so there was still another issue maybe a worn turbo or blocked breathers possibly even rings on the way out
What they didnt tell you was the real way to check if its rings or valve seals.. pull plugs, do a compression check. If you have a low cylinder, put a splash of oil in, then recheck. If it goes up you have bad rings. If not then your issue is in the head. OR if its just the smoke it could be a leaking oil seal in the turbo. So much info left out...
Ed China is the undisputed Automotive ZEN MASTER.
My gradfather has '88 Sierra 1.8 CL (Pierburg carb.). Car has no heating, while flow through heater core is normal and flaps work. Help please.
We not gonna talk about how this Cossie was broke for parts about 18months after the episode originally aired.
It didn’t though. Last not in December 2019
So it’s had a recent rebuild but they didn’t bother replacing the stem seals?!
Cowboys everywhere
It's TV, you can't believe a WORD they say.
how do you get the next part of this ???????
Only thing I’d say is it’s much easier to keep the turbo and inlet manifold bolted to the head and remove in one then strip it on a bench
Big Edd is sadly missed on tv now. This show used to be brilliant until Mike the back stabber put money before friendship and quality programming. WD’s is diabolical now, no disrespect to Ant.
Was This Left hand drive or right hand drive
6:45 Instructions not clear.... how do I rebuild my head Edd? If i remove my eyes i wont be able to see what I'm doing? Also if I remove my brain will i still survive? Could I rebuild my head in the shed or is a clean environment essential to prevent diseases when I open up my head? Also should I ask Paul to give me a hand? Or a ear? Ed rebuilding a head, I think certainly Nose what hes doing.
It's always good to see you, sir!!!!
just sayin
Why not use Paul all the time. Seems he's just sitting in the corner anyways.
Paul is actually the mechanic. Edd is a presenter
Wheeler dealer has had its day, you only have to look at american Mike to know good bye
I can imagine Edd creates his own Top Gear . 😀😀😀😀
EDDS THE MAN
Anyone know the season and episode which this is from?
1:01 THIS IS MEDIUM AT BEST.
MASSIVE INTER COOLER MEASURES 800X400X100MM
Mcq Cjc....YOUR CAPS LOCK IS STUCK ON APPARENTLY....
Hi Ed, where is Mike...., I thought that you both is Team..isn't it? What make the vid is interesting, there are Business too ; Buy, repairs and Sale. That's Fun man...Sorry the vlog for only car repairing was plenty in youtube. Hope you both back as Old session. Wheeler Dealer show. Thank's
I have a white coswort -92 BUY?
Would say one if the best engines made
I call the spinner trick “Daddy Magic.” One of those tricks my dad taught me.
I still remember the engins were small in the 60s and early 70s
6.14 I thought he disconnected the battery?
Same way as he says, as he runs his finger along the bore "It looks as if this engine has recently been rebuilt". You can look and see the crosshatch and tell that. And I would not have broke the motor apart to figure this out. It's called a leak down test.
@@Billhatestheinternet the 3S-GE from my MR2 had the crosshatch still visible like that with 310k km on the clock when I had the head off this summer.
Good to see you on any show!!
just sayin x2
Seriously, Edd? You should have done a leakdown test to determine where the issue was before taking the head off. Every time one of these gets posted, I get my hopes up that Edd is back....
Maybe he already knew that those models have those problems there
you can't do a leak down test to check valve guid sealers
@@jimmieandersson813 It can tell you there's nothing wrong with the combustion chambers themselves, which means the oil must be coming in through the intake. In which case it would probably be the valve guides or the turbo.
Probably did that anyway and didn't show it. Lots of things done in the background to make the show flow.
Как интересно было смотреть за Эдом!
Hola alguien puede traducirlo al cadtellano soy fanatico tuyo🙏
For me wheelers died when Ed was pushed out 😢😢😢😢..
Edd is the man, new episodes suck ....
El tutorial es execelente pero nose nada d igles
yep .not the same .since he left wheeler dealer.
valve seals, not guides!
ok. đúng rồi kỹ thuật hàn tốt thì không vấn đề.
or of course the most likely scenario with a Ford could be the fault, the valve stem oil seals. no need to remove the cylinder head on most Ford engines as theres usually a tool to change the seals in situ. either this was all done for the sake of TV OR they already KNEW there was other issues.
ah eski günler
Edd China: Removes Cylinder head in 1 hour.
Me: Spends 20 minutes looking for lost sockets. Can't undo hose clamps as they're really fiddly.
Rounds off a nut and have to grind it off. Grinder slips and damages other hose. Coolant spilled all over driveway.
Falls of on slippy leaves.
Reward self with cup of tea and biscuit for achieving 2% of the job.
He said big Turbo. Where ?! :)
nhiệt từ động cơ đốt trong và bếp ăn làm ảnh hưởng... vẽ rồi mà
valve seals, use synthetic oil, pcv valve.
Best part is you only get 10 minutes of the show showing Edd at his best then a message from Mike asking you to subscribe, It's Mike that is fleecing people getting revenue from this scam. Suggest you don't subscribe.
We want subtitle in Turkish ... ☺️☺️☺️
Before i even get a minute into this,im gonna say rings because its a cosworth,its boosted, and prolly owned by a college kid previously so ya,rings def gonna need to be done
I miss Ed
Edd always reminds of Tom Baker for some reason.
Edd vs Ant 🤔🤔🤔🤔
All that uprated Pinto ever did was burn oil 😂
First time watching the show but if he even suspected rings why didnt he just start with a compression test, would have ruled out rings right awat
Zach Bochek....these episodes are all edited for time, so he very well have done a compression test and it was edited out of the final show.....
If you added labour costs into the costings, the car made a massive loss.
Need more lightning in the video cant see anything...
And in the end, it was only a faulty turbo.....
I thought god not another car video then I saw Mr China and watched it in its entirety was kind of disappointed when it finished so quickly.
I click on anything automotive with the words "cosworth" in it.
How the hell does Edd get his hair to look like that ?
It's only a pinto block its an easy job.
Is it me or did he do a respray from blue to red while he was farting about?😃😃
Anyone missing Paul?
Arabanın aralası aynı e 30
In this video we learned exactly nothing
ᴴᵃᶰˢ ᴮˡᵃᵃᵘʷ ok boomer
👍👍👍👍👍👍👍👍👍👍👍👍👍
You guys know Edd was the reason for WD's success. Not Mike. (well, maybe a little) Not Ant. (not at all) Edd.
That's what money does to you there's no friends there's no family only dollars
Good evening really one of your biggest French fan we would like the voiceover in French and the really you would have in addition the 66 million French that would follow you good evening
The most copied engine design on the planet....
Turkish dubbing please come
dam edd is going to send it ant to get it fixed
Turbos are steroids for cars. They will give you power at a cost of longevity.
I Bet Edd isnt getting any royalties from them uploading old clips, hanging of his coattails since they cocked it up
BOLLOCKS SNOWFLAKE
@@ianmangham4570 🤣🤣
Im so proud of my self dlthat i can do this in one day , im literally proud, with 18 yo
Edd China the Jamie Oliver of cars. (Brewer more like Kim Jong-un)
Reading comments on how people miss edd I don’t understand he isn’t any better than ant edd is a boring person
Why would anyone dump money into that junk car
Because there a collectable classic with a great pedigree
The most successful touring car ever
First