*🛑 Ide yang kreatif & Cemerlang.. 💓* ▪️Mantap, keren dan sangat bermanfaat. Terimakasih atas ilmunya yang bermanfaat dan sangat mudah ditiru. Semoga bapak sehat dan sukses selalu, Is the best.. 💓👍👍👍
Hello, i am building a lamp from an old log, which will feature 3-5 pendels. I was wondering how you have assembeled all the wiring? are u using multiple terminals to collect the pendels, and then pieces of wire to connect the terminal, and then a wire from that terminal into the socket? or a whole other way? Best regards.
Hello, in my lamp I made two groups of light bulbs, from each of which I laid a separate two-wire to terminal blocks (two WAGO terminals for each group). Then I supplied each group terminals with the power through the switches.
Евгений, зазоры достаточные. Но для таких изделий нельзя экономить на лампочках, поскольку от этого зависит количество выделяемого тепла(плохой радиатор, дешевый драйвер, диоды разгоняются до максимального тока и, следовательно, бОльшее тепловыделение )поэтому рекомендую брать качественные( я поставил osram - 9 месяцев, полёт отличный).
How is this a DIY project if I need tools worth thousands of dollars??? I don't have table saws or routers!! A DIY project is something I can make using normal tools available in most households like a hammer, pliers, screw drivers, screws, some glue!! THOSE are tools for a DIY, but all you DIY videos ask me to "do it myself" using thousands of dollars worth of tools!! If I had all these tools and machines I'd open up my own carpentry business!!
It is just an idea that you can realize with inexpensive tools: instead of a joiner you can use planer, instead of a band saw jigsaw, instead of a router a drill with forstner drill bit, and so on. I agree that it will be more difficult than with a special tool, but someone is looking for a solution, and someone sees problems.
@@JustDoIt_en Well then maybe you can do it with a planer a jigsaw and a drill with forstner drill bit so us "not carpenters" can know what tools to buy for hundreds of dollars "vs thousands of dollars" to make something that would cost us 40$ at IKEA!!
@@MyRhythmDivine I live in South Africa and you sound like a complainer, Those hand tools you mentioned will not be able to make this lamp but at a hand saw some chisel and you are a for away. I've seen people create things with nothing but a hacksaw blade. So stop complaining.
@@jamesarendse9739 It's called DIY which is short for DO IT YOURSELF, right? If I have to buy thousands of dollars' worth of tools and learn carpentry then it's not a DIY project so don't call it a DIY project. NOW do you understand what I'm talking about?
I loved this and you're right it would have been better with the thing around. But it's gorgeous nevertheless
Thank you 🙏
That's some amazing freehand routing on those wire grooves.
Thanks a lot, its my first serious video and I appreciate every comment)
*🛑 Ide yang kreatif & Cemerlang.. 💓*
▪️Mantap, keren dan sangat bermanfaat.
Terimakasih atas ilmunya yang bermanfaat dan sangat mudah ditiru. Semoga bapak sehat dan sukses selalu, Is the best.. 💓👍👍👍
Terima kasih 🙌
Absolutely beautiful!!!
Jorge, thanks 🙏
Came from Jay Bates recommendation, excellent work, greetings from New Zealand.
Russ, thank you!
love from Greece. Keep up
Thanks a lot!
Incredible work, congratulations.
Thanks 🙏
Thanks 🙏
Alat e komplet mas broo.....joss👍
`Great tips, great project!
Thanks 🙏
Warm greetings from India. Well done. Keep up )
Happy happy thanks, I will)
WELL DONE!!
Thanks! 🙌
😍😍 me encantan!
Gracias 🙏
Dude, that's Awesome! Greets from the Netherlands. ^_^
Thanks, Storin👋
Show 🏆
🙌
awesome :)
Wojciech thanks)
Beautiful work! New sub
Phil, thank you!
top!
Thanks 🙏
Hello, i am building a lamp from an old log, which will feature 3-5 pendels. I was wondering how you have assembeled all the wiring? are u using multiple terminals to collect the pendels, and then pieces of wire to connect the terminal, and then a wire from that terminal into the socket? or a whole other way?
Best regards.
Hello, in my lamp I made two groups of light bulbs, from each of which I laid a separate two-wire to terminal blocks (two WAGO terminals for each group). Then I supplied each group terminals with the power through the switches.
@@JustDoIt_en so you assembeled Them 2-2?
Not exactly. 1 - phase1, 2- phase2, 3 - common(neutral) for all groups.
Hello, do you sell the plans with measurements, you could send them to Mexico, how much do you cost?
Hello, there is a link to the drawings in the description to the video. Use it!
Достаточные зазоры между лампочкой и деревом? Перегрева нет?
Евгений, зазоры достаточные. Но для таких изделий нельзя экономить на лампочках, поскольку от этого зависит количество выделяемого тепла(плохой радиатор, дешевый драйвер, диоды разгоняются до максимального тока и, следовательно, бОльшее тепловыделение )поэтому рекомендую брать качественные( я поставил osram - 9 месяцев, полёт отличный).
@@JustDoIt_en спасибо за ответ! А радиатор где имеется ввиду, в лампочке? Или проставку какую-то нужно сделать между патроном и дереаянным плафоном?
Евгений, радиатор в самой лампочке.
@@JustDoIt_en спасибо
Which software you use to design
Hello, sketchup pro.
👍👍👍🕶️
🙏
Take a LED headlight!
I have tried one, but it couldn’t help.
Nice but LED lamps only!
Ted, you are right.
Жаль на английском языке ((
Искандер, то же видео, только на русском языке: ruclips.net/video/lhaBlj-4eDM/видео.html
How is this a DIY project if I need tools worth thousands of dollars??? I don't have table saws or routers!! A DIY project is something I can make using normal tools available in most households like a hammer, pliers, screw drivers, screws, some glue!! THOSE are tools for a DIY, but all you DIY videos ask me to "do it myself" using thousands of dollars worth of tools!! If I had all these tools and machines I'd open up my own carpentry business!!
It is just an idea that you can realize with inexpensive tools: instead of a joiner you can use planer, instead of a band saw jigsaw, instead of a router a drill with forstner drill bit, and so on. I agree that it will be more difficult than with a special tool, but someone is looking for a solution, and someone sees problems.
@@JustDoIt_en Well then maybe you can do it with a planer a jigsaw and a drill with forstner drill bit so us "not carpenters" can know what tools to buy for hundreds of dollars "vs thousands of dollars" to make something that would cost us 40$ at IKEA!!
@@MyRhythmDivine I live in South Africa and you sound like a complainer, Those hand tools you mentioned will not be able to make this lamp but at a hand saw some chisel and you are a for away. I've seen people create things with nothing but a hacksaw blade. So stop complaining.
@@jamesarendse9739 It's called DIY which is short for DO IT YOURSELF, right? If I have to buy thousands of dollars' worth of tools and learn carpentry then it's not a DIY project so don't call it a DIY project. NOW do you understand what I'm talking about?