Just what i needed. Door gaps were uneven and every time i went over a bump the interior light and door open warning came on and was driving me insane. Turned out to be a worn flat bottom castor. Bought the whole bracket off ebay and got job done in 10 minutes, thanks for a great vid.
Hi pal brilliant video, hopefully will solve my problem with my sliding door. Im having a look through some of your videos and I've subscribed for future posts. Love the paint job you done, have you any videos on how to prime it and paint it please?
Larc..good vid..any idea how to raise the door..ive put new rollers on but its still a bit low. Tried a few things but no luck so far...its a renault master which i believe is same as yrs..cheers
Very helpful. Im going to attempt that on mine. Is there a vid for the middle rail tidy up you mentioned here. Mine needs doing and Id love to see how to do that. Thank you so much for all the help.
Thanks for your kind comment 😃. I'm hoping to do the middle rail soon. Struggling with work and an old house getting in the way of RUclips at the moment. Hopefully not long though 🤞. Cheers Larcs 👍
How can I adjust the sliding door so that the top right corner pulls in tighter? Water is coming in and causing damp 😖 I’ve tried adjusting the top roller but no luck
You could maybe adjust the upper door striker on the B pillar to try and pull it in a bit. Also your top roller might be worn or the bracket bent? Good luck sorting it out 🤞
complimenti per i video e riesco a capirti abbastanza bene, sei forte💪🏻👍🏻😁 in ogni caso io ho lo stesso problema...la porta non chiude bene e i contatti della serratura non combaciano perché la porta va un po' più giù! ora proverò a cambiare quella cerniera scorrevole di sotto e spero vada bene. Poi non so se bisogna cambiare la cerniera scorrevole del binario centrale?
I done this with mine but the top right corner still protrudes out where you pointed out at the beginning of your video. Did this fix your top corners? I also took the top roller off and replaced the O-ring on the roller with a thicker O-ring and it makes it alot tighter... Didn't fix the top right corner of the door though
I don't suppose you have any videos or plan to make any on diagnosing why my battery keeps going flat to the point of kills the battery dead so it won't even charge do you?
Hey Larcs did adjusting those bottom rollers sort the gap at the top rear of door? Mines sitting out a bit but everything else seems okay. Can’t work out how to adjust to pull that top edge in
It didn't change the back, I have got to do the rear roller set sometime though, that might do something? Could the door be a bit twisted? Cheers Larcs 👍
@@LarcsWorkshop thanks Larcs, I just heard from someone that the two rubber grommets (from the inside on the left of the door) can be removed and adjusted. Hoping that can bring it in a bit! Door seems solid apart from being slightly out on that top edge
Hi, I’ve just replaced the bottom roller on mine, but every time I close the door it slips out of the track, and it’s almost as though the door is out of sync now, doesn’t feel like there’s room for much adjustment? Thanks
Just what i needed. Door gaps were uneven and every time i went over a bump the interior light and door open warning came on and was driving me insane. Turned out to be a worn flat bottom castor. Bought the whole bracket off ebay and got job done in 10 minutes, thanks for a great vid.
Thanks, I'm glad it was of some help 😁. Good job sorting it out 👌.
Cheers Larcs 👍
Thanks for the video. Your videos are educational for us van owners. I am going through all of your RUclips videos at the moment.
Thanks again 😃, no problems. I hope you enjoy them.
Cheers Larcs 👍
Good down to earth videos very easy to follow and the chat is entertaining
Thanks, that's very kind 😃.
Cheers Larcs i
Well done mate - Good job
Thanks very much 👍
Thank you From Türkiye 🇹🇷
Thanks, no problems 👌.
Cheers Larcs 👍
Thanks very much for the video - very helpful (and entertaining!) Cheers
Thanks, that's very kind 😁. Glad it was of some help.👍
Got this exact issue with mine. Thanks for the video! It's going to help me a lot!!
Thanks, good luck with the repair 🤞.
Cheers Larcs 👍
Nice job. Not too expensive. It runs really smoothly now.
Thanks 👍
Cheers Larcs
Great videos, keep them coming 😁👍
Thanks very much 😁. I'll try my best 🤞.
Cheers Larcs 👍
If you go to main dealer, they will replace the whole bracket at a cost of £250, outrageous given the simple repair to the roller.
True👍
Hi pal brilliant video, hopefully will solve my problem with my sliding door. Im having a look through some of your videos and I've subscribed for future posts. Love the paint job you done, have you any videos on how to prime it and paint it please?
Thanks 👍. Sorry, I don't have any additional videos on it.
Another great video, top man
Thanks 👍. I really must get around to doing the rear rollers. Just so many other things to fix at the moment 😂.
Cheers Larcs
buen video, gracias por compartir, un saludo
Thank you 👍
Larc..good vid..any idea how to raise the door..ive put new rollers on but its still a bit low.
Tried a few things but no luck so far...its a renault master which i believe is same as yrs..cheers
Think im ok...door was bouncing back a bit at top .think its the rubber seal..more investigation tmorw! Cheers
👍
@@daltropical5236 . Good luck sorting it out 🤞.
Very helpful. Im going to attempt that on mine. Is there a vid for the middle rail tidy up you mentioned here. Mine needs doing and Id love to see how to do that. Thank you so much for all the help.
Thanks for your kind comment 😃. I'm hoping to do the middle rail soon. Struggling with work and an old house getting in the way of RUclips at the moment. Hopefully not long though 🤞.
Cheers Larcs 👍
How can I adjust the sliding door so that the top right corner pulls in tighter? Water is coming in and causing damp 😖 I’ve tried adjusting the top roller but no luck
You could maybe adjust the upper door striker on the B pillar to try and pull it in a bit. Also your top roller might be worn or the bracket bent? Good luck sorting it out 🤞
complimenti per i video e riesco a capirti abbastanza bene, sei forte💪🏻👍🏻😁 in ogni caso io ho lo stesso problema...la porta non chiude bene e i contatti della serratura non combaciano perché la porta va un po' più giù! ora proverò a cambiare quella cerniera scorrevole di sotto e spero vada bene. Poi non so se bisogna cambiare la cerniera scorrevole del binario centrale?
@@valtercarnevale1806 Thanks, no problems 👍.
Super MERCI😀
Thanks 👍
Tankes
👍
Just buy the whole bracket for 6o odd quid,done mine last week,took literally 10 minutes
👍
I have to push me door on the black plastic at the rear of it to get it to close properly, would replacing the rollers cure that do you think?
I doubt changing the front rollers will sort it? I've got to do the rear ones on mine yet, that might help.
Cheers Larcs 👍
Of course, duh me🤭. You changing the whole bracket(£20) or just replacing the rollers(£8) on Ebay?!
@@briain_odonnghaile I'm going to be just changing the rollers👍
Let me know how you get on please, I might just do the same. 👍
@@briain_odonnghaile I'll try to do a video of it 👍
I done this with mine but the top right corner still protrudes out where you pointed out at the beginning of your video. Did this fix your top corners? I also took the top roller off and replaced the O-ring on the roller with a thicker O-ring and it makes it alot tighter... Didn't fix the top right corner of the door though
Mine pulled in fine. You might be able to adjust the latch pin to pull the back in a bit? Good luck 🤞
Cheers Larcs 👍
I don't suppose you have any videos or plan to make any on diagnosing why my battery keeps going flat to the point of kills the battery dead so it won't even charge do you?
I've not got a problem with mine to diagnose at the moment, sorry. Might be worth searching RUclips for identifying a battery drain?
Good luck 🤞
Hey Larcs did adjusting those bottom rollers sort the gap at the top rear of door? Mines sitting out a bit but everything else seems okay. Can’t work out how to adjust to pull that top edge in
It didn't change the back, I have got to do the rear roller set sometime though, that might do something? Could the door be a bit twisted?
Cheers Larcs 👍
@@LarcsWorkshop thanks Larcs, I just heard from someone that the two rubber grommets (from the inside on the left of the door) can be removed and adjusted. Hoping that can bring it in a bit! Door seems solid apart from being slightly out on that top edge
@@twinter Good luck. Keep us informed on how it turns out 👍
@@twinter I have the same issue so please let me know if you find a solution.
Hi, I’ve just replaced the bottom roller on mine, but every time I close the door it slips out of the track, and it’s almost as though the door is out of sync now, doesn’t feel like there’s room for much adjustment? Thanks
Maybe the track is damaged or worn?
Cheers Larcs 👍
@@LarcsWorkshop thanks for your reply mate I’ll take another look tomorrow 👍🏼👍🏼
@@ryangrosvenor8744 good luck 🤞
@@LarcsWorkshop thanks mate I might need it with the problems I’m having with my vivaro 😂😂
@@ryangrosvenor8744 👍
Great video, enjoying how you tackle all these issues on the Vivaro☺️. Speaking of which, would you be able to say what MPG you get? Cheers!
Thanks 😊. I think I'm getting around 40 MPG, but I do drive like a granny😉.
Cheers Larcs 👍
@@LarcsWorkshop Thanks! Keep up with your good work. I'm learning a lot :-)
@@mgfer6313 👍
👍
Cheers 👍