are you sure these spacers are right? the long ones go in the rear and the short in the front? I installed them like that per the instrux but it was obvious something was not right, so I switched the spacers and they fit much better with the long in the front and the short in the rear. Also, this using fuel line for the spacers is kinda chintzy. Maybe you should get some composite material spacers made, or 3D printed. I am currently considering doing that but that would mean removing those four screws again and not sure the block we are tapping into will take it so maybe I would just leave well enough alone. But if they came from the factory with some better spacers it would not look like this was a trailside fix. Otherwise, look to work pretty well so far anyhow.
Just did this install on my 2023 yesterday. The self-tapping screws never feel like they really get snug when tightening. Hopefully, I will not be adjusting and retightening down the road.
Ordered some looks fucking amazing.. missing 1 screw for rear flap. Found out after installing all others..im not dealing with the hassle of taking them all off, re-packaging/shipping them back to you for 1 screw.. just tell me specific dimensions so I can find one @ a hardware store.. I know hex head 3/8ths and length 1in. but whats the diameter/thickness of the thread? Thanks.
installer dude most know somebody, he got the hex head self tapping screws.the phillips head self tapping screws everbody eise gets are tight fit. looks like nice quality.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
are you sure these spacers are right? the long ones go in the rear and the short in the front? I installed them like that per the instrux but it was obvious something was not right, so I switched the spacers and they fit much better with the long in the front and the short in the rear.
Also, this using fuel line for the spacers is kinda chintzy. Maybe you should get some composite material spacers made, or 3D printed. I am currently considering doing that but that would mean removing those four screws again and not sure the block we are tapping into will take it so maybe I would just leave well enough alone. But if they came from the factory with some better spacers it would not look like this was a trailside fix.
Otherwise, look to work pretty well so far anyhow.
Just did this install on my 2023 yesterday. The self-tapping screws never feel like they really get snug when tightening. Hopefully, I will not be adjusting and retightening down the road.
Ordered some looks fucking amazing.. missing 1 screw for rear flap. Found out after installing all others..im not dealing with the hassle of taking them all off, re-packaging/shipping them back to you for 1 screw.. just tell me specific dimensions so I can find one @ a hardware store.. I know hex head 3/8ths and length 1in. but whats the diameter/thickness of the thread? Thanks.
installer dude most know somebody, he got the hex head self tapping screws.the phillips head self tapping screws everbody eise gets are tight fit. looks like nice quality.
You must have bought an open box or got from someone second hand...
Need a walk around bro!
can you do this without the horrible music?
Will these fit an sr model without stock fender flares?
The website says it will work “with or without fender flares”.
Is it only for OEM fenders or can it be mounted without fenders?
The site says it works with both I believe
Does this work for the 2gen?
These mud flaps are for 3rd gen only. We are working on 2nd gen currently!
Will these fit a 22 trd off road? I have read some mud flaps dont fit the trd, pro or off road side exit exhaust.
Fit mine just fine
Whoever edit this video. Why the hell did you make it so dark? It's hard to see anything