I am trying to create a safety project with an EL2911. Instead of the EL6910 and EL1904, the EL2911 is to act as the target system and as an alias device for input. I followed the tutorial and configured the EL2911 as the target system (as in the video) and received the following error message: Severity Code Description Project File Line Suppression State Error For the selected Target System is required a corresponding Alias Device with linking mode 'Local'. myFirstSafetyProject C:... I was able to fix the error message by creating an alias device EL2911 with Linking Mode Local. When trying to perform the Multi Download I get the error: Login failed on terminal 2 (El2911). The login data is correct. I have checked them several times. Can anyone help me?
Hello! Good information, Another sopport I can't find, Do you know how to copy a total of *.sal? If I have a zone with ("Alias Devices" and a *.sal) and for an example it's Zone A and I want to copy it to Zone B and it's the same code but a different Zone. Regards Lars
Hi! From the TwinSAFE project icon, you could right click open the file folder view and do a copy/paste there. However, I'd consider user function blocks instead.
I followed your steps exactly, but when i want to link the alias devices to the tasks, it is greyed out and it states "not available". Im using a el6910 aswell and i am trying to communicate to a custom slave over a ek1110 with FSoE. Any ideas?
I did define the targer. But i had two issues: The Dip-Swotches on the EL6910 were configured to address 0 and the custom slaves ESI File was not imported
![YoungBoy Never Broke Again - Missing Everything [Official Video]](http://i.ytimg.com/vi/dTYeMZGzOzw/mqdefault.jpg)
Thanks!
You’re welcome!
I am trying to create a safety project with an EL2911. Instead of the EL6910 and EL1904, the EL2911 is to act as the target system and as an alias device for input. I followed the tutorial and configured the EL2911 as the target system (as in the video) and received the following error message:
Severity Code Description Project File Line Suppression State Error For the selected Target System is required a corresponding Alias Device with linking mode 'Local'. myFirstSafetyProject C:...
I was able to fix the error message by creating an alias device EL2911 with Linking Mode Local. When trying to perform the Multi Download I get the error: Login failed on terminal 2 (El2911). The login data is correct. I have checked them several times.
Can anyone help me?
Hello! Good information, Another sopport I can't find, Do you know how to copy a total of *.sal? If I have a zone with ("Alias Devices" and a *.sal) and for an example it's Zone A and I want to copy it to Zone B and it's the same code but a different Zone. Regards Lars
Hi! From the TwinSAFE project icon, you could right click open the file folder view and do a copy/paste there. However, I'd consider user function blocks instead.
I followed your steps exactly, but when i want to link the alias devices to the tasks, it is greyed out and it states "not available". Im using a el6910 aswell and i am trying to communicate to a custom slave over a ek1110 with FSoE. Any ideas?
I'm not sure exactly what you're seeing, but it sounds like you're trying to connect the Alias devices before the target is defined.
I did define the targer. But i had two issues: The Dip-Swotches on the EL6910 were configured to address 0 and the custom slaves ESI File was not imported