Since this video was filmed we have had the XLT running, want to see how mad that thing is compared to the sideways of the RF5?? Stay safe Leg Ends, stay having fun and get on that 2022 event merch! #FxckCancer RCunexttuesday.co.uk
I love it, wish the exhaust had a low end valve or something. It sounds so monotone until you open it up then the noise says "come get some!" Can't wait to see more try find some grass and mud for it.
In fairness to it, that is also our driving. We're still unsure when enough is enough and we can rip it properly. Even then this kind of terrain is impossible to drive on without squirreling all over the place and to counter that you find its comfort zone on the trigger pull and stick to that🤔
@@RCunexttuesday sound like the rules of drifting, find it, hold it, just a shame the tone isn't all the way through the rev range. Great car to see whipping around 👍
@RCunexttuesday yes the easy start system on the truck is similar to easy start on some Stihl products . Your not turning the crank at first your coiling a spring then it finally releases at end of steady pull and does a lot more of the work for you. Hard to break old jerk the pull rope fast habbit . But try it it will start easier
Dadgumit! Sorry to be a dick! Lol. I could have said that differently to make it more inclusive and encouraging! Didn’t mean to be that guy! Was just talking about comments like this earlier and was like, ah crap!
That body looks sick guys, if it wasn't running and u had a close up 360 of it u would think it was a real rally car, at one point when Jay 1st tried starting it all the smoke was on his feet lol it reminded me on ur 24 hour live stream of when he set his feet on fire 😂😂😂👊💯
I want one of these but went to a meet Sunday and 3 there wouldn’t start . One would idle for 2 seconds and the other 2 wouldn’t start It’s put me off a bit My mate reckons it’s bad spark plugs and crap jn the carb I always thought these were pretty bulletproof
Release the "Bee in a Beer can" 🤣J gets his first "Nitro Tattoo" OUCH! Shame about the pull start guys😔 Shes a Nitro burn'n gravel sling'n beastie! Right On Brothers!💪🏁
Been thinking about getting the RF5 as it’s definitely more affordable than building a MCD XR5. How are you guys liking it so far? Any problems or needed upgrades?
It's great value for money. We're loving it, huge learning curve if you're not *really* knowledgeable with 2 stroke. It seems to have issues simply because it's made as a budget truck in comparison to MCD, but when things go wrong you can replace it with the stupidly cheap stock parts or go for the likes of the Losi and such👍
@@RCunexttuesday Definitely agree there. What types of issues? Issues with the motor/mechanicals, or issues just with parts breaking because quality is a not as high?
@@RCunexttuesday this would be my first 2stroke RC but I’m not fearful of the learning curve as learning more and understanding intrigues me. I just don’t want to put myself in a situation where after a few runs things like the motor goes bad or things start becoming faulty and another few hundred dollars have to be spent right away.
We're struggling with getting it running to full capacity. Not sure what's wrong with it so I can't tell you how simple or costly it will be to sort because that's what we're trying to learn for ourselves. One thing I can tell you is this thing is cheap. Not in terms of quality, it's very well made if you don't know the level that the MCD and Losi's are built to but like I said if you wanted to you could slap parts from both other brands onto here no problem👍
A beast. Couple of issues with the stock engine but we're not two stroke guys so someone with a but more knowledge may have had better luck than we did, no denying it's a weapon though!
Great video great RC's so happy that you guys like gas RC'S. But you will never get used to getting burnt that sucks. Still funny to watch. You guy's are great thanks
Bigger is always better... the bloody thing moves tires when you crash for ef sake! imagine what it does to ankles 🤕🤯🤠 Cool factor 10 Pain in the arse factor 8.5 But hey, all your RUclips friends want one!🥳
In fairness with the noise well let you off on the fact that you probably didn't hear us say we were going easy on it😅 that being said electric weighs a whole lot more... Swings and roundabouts
You see the fun thing about this comment? There's absolutely nothing constructive in it😅 this, this is the exact reason we turned it electric, we know what's going on with electric which means we don't get comments telling us were doing it wrong but not telling us how to do it right🙃✌️
@@RCunexttuesday that's fair enough, tune a 2T is not that easy if you don't know what and how to do it, just by the sound and how the car respond on throttle it's easy to know it's running lean, probably just need a 1/4 turn out on the low needle screw, top end it's a bit harder as you really need to listen to the engine and check the color of the spark plug, white/grey = lean, brown = perfect, black = too rich
Since this video was filmed we have had the XLT running, want to see how mad that thing is compared to the sideways of the RF5??
Stay safe Leg Ends, stay having fun and get on that 2022 event merch! #FxckCancer RCunexttuesday.co.uk
I love it, wish the exhaust had a low end valve or something. It sounds so monotone until you open it up then the noise says "come get some!"
Can't wait to see more try find some grass and mud for it.
In fairness to it, that is also our driving. We're still unsure when enough is enough and we can rip it properly. Even then this kind of terrain is impossible to drive on without squirreling all over the place and to counter that you find its comfort zone on the trigger pull and stick to that🤔
@@RCunexttuesday sound like the rules of drifting, find it, hold it, just a shame the tone isn't all the way through the rev range. Great car to see whipping around 👍
I just remembered why I switched to an electric chainsaw and weedwacker.
Great video guys but it's too loud:)
Can't argue with that mate, it's great fun but It definitely forces a newfound appreciation for electric!
Awesome rally car and drifts 👍 This gravel is really good fun 👌 👊
Thanks dude! It's a beast!
A solid 10 on the noiseability!
The worst bit is its louder in person😂
I like the decal work you did on the RF5 body
Thanks dude, I've screenshotted your comments, might help us next time we get to running it... Hopefully😅 cheers boss!
@RCunexttuesday yes the easy start system on the truck is similar to easy start on some Stihl products . Your not turning the crank at first your coiling a spring then it finally releases at end of steady pull and does a lot more of the work for you. Hard to break old jerk the pull rope fast habbit . But try it it will start easier
What a beast Great content as always 👌
Appreciate it my guy
That is great! I love 5th scale.
We have a newfound love for it🙏
I’m sure it’s fun but I’m over the nitro. Great show! Super rad ripper, no question!
To each their own my friend👌🏻
@@RCunexttuesday
Yessir! I don’t mean to dog the car and I watched the whole show! If you got a smile, that’s what counts!
Dadgumit! Sorry to be a dick! Lol. I could have said that differently to make it more inclusive and encouraging! Didn’t mean to be that guy! Was just talking about comments like this earlier and was like, ah crap!
Couldn't agree more! It's all good, no stress boss man👊
Looks very hard on the suspension, looks like great fun to drive though 😀
It sure is!
Love it keep it up. What a monster 👍🏻
👊🏼👊🏼
awesome rc and great run
Glad you enjoyed my friend!
That body looks sick guys, if it wasn't running and u had a close up 360 of it u would think it was a real rally car, at one point when Jay 1st tried starting it all the smoke was on his feet lol it reminded me on ur 24 hour live stream of when he set his feet on fire 😂😂😂👊💯
Classic memory that, shame we didn't get the clip... We'll have to do another live one year and see what we can make of that😅👊
Hot dang. I think my testosterone level just rose.😂😊❤
Understandable chief
looks good, but just how big is it?!? there's no way that that beast is fitting in a backpack! ;)
It depends how big your backpack is 🤣
Fun car once you get all the tune sorted out
Great truck buddy
Thanks Mr friend
Great run guys
Thanks boss🔥
Awesome..Smoke all day🌪💨
All. Day.😎
I want one of these but went to a meet Sunday and 3 there wouldn’t start . One would idle for 2 seconds and the other 2 wouldn’t start
It’s put me off a bit
My mate reckons it’s bad spark plugs and crap jn the carb
I always thought these were pretty bulletproof
the big truck has a easy start. replace it , but once you do just pull it slower all the way to the end and it will spin the starter prawl better.
Release the "Bee in a Beer can" 🤣J gets his first "Nitro Tattoo" OUCH! Shame about the pull start guys😔 Shes a Nitro burn'n gravel sling'n beastie! Right On Brothers!💪🏁
Cheers Mr Gibbs!🤟🏼
Been thinking about getting the RF5 as it’s definitely more affordable than building a MCD XR5. How are you guys liking it so far? Any problems or needed upgrades?
It's great value for money. We're loving it, huge learning curve if you're not *really* knowledgeable with 2 stroke. It seems to have issues simply because it's made as a budget truck in comparison to MCD, but when things go wrong you can replace it with the stupidly cheap stock parts or go for the likes of the Losi and such👍
@@RCunexttuesday Definitely agree there. What types of issues? Issues with the motor/mechanicals, or issues just with parts breaking because quality is a not as high?
@@RCunexttuesday this would be my first 2stroke RC but I’m not fearful of the learning curve as learning more and understanding intrigues me. I just don’t want to put myself in a situation where after a few runs things like the motor goes bad or things start becoming faulty and another few hundred dollars have to be spent right away.
We're struggling with getting it running to full capacity. Not sure what's wrong with it so I can't tell you how simple or costly it will be to sort because that's what we're trying to learn for ourselves.
One thing I can tell you is this thing is cheap. Not in terms of quality, it's very well made if you don't know the level that the MCD and Losi's are built to but like I said if you wanted to you could slap parts from both other brands onto here no problem👍
How good it was?? Any problem?? Wanna to get one...
A beast. Couple of issues with the stock engine but we're not two stroke guys so someone with a but more knowledge may have had better luck than we did, no denying it's a weapon though!
@@RCunexttuesday Sounds Good man...and thanks you mate
Great video great RC's so happy that you guys like gas RC'S. But you will never get used to getting burnt that sucks. Still funny to watch. You guy's are great thanks
Thanks Michael glad you're enjoying it mate ✌️
the low side needle is way off , that why its very boggy on and of the throttle
oh I wish this could be bought as a roller, i'd love this electric
We enjoyed the 2 stroke but ended up going electric... Basically, agree 100%, roller would be a game changer
@@RCunexttuesday yea and if I'm throwing away the gas parts I might as well buy the MCD
Needs a 8k rpm clutch, its rarely in powerband here
We've tried a couple of clutches. Couldn't tell you what they're rated at, self proclaimed as not petrol heads🫡
Another good one lads more
Thanks lol chrisssy
Our pleasure my friend👊🏼
Bigger is always better... the bloody thing moves tires when you crash for ef sake! imagine what it does to ankles 🤕🤯🤠
Cool factor 10
Pain in the arse factor 8.5
But hey, all your RUclips friends want one!🥳
Your have to change your name to Neil if this thing hits you, because there would be nothing below the knee left😂👍
🔥💪🏾💯
👊
Belíssimo carro 🚗
Are you running it fat or just not going full throttle?
Going easy on it, we do address this in the video👍
It Needs a Tune runs to Lean
We made the executive decision that we couldn't figure out 2 stroke. In goes an electric combo🤪
Like Honda civics owned by teens, makes a lot of noise and doesn’t go very fast 😂 I’ll stick to electric.
In fairness with the noise well let you off on the fact that you probably didn't hear us say we were going easy on it😅 that being said electric weighs a whole lot more... Swings and roundabouts
product copy from MCD Racing but e in Chinese and e at high price
Not sure id agree that halving the price of the original can be considered 'high'
👍🏽🇲🇫
Poor thing is running so lean, painfull to watch lol
You see the fun thing about this comment? There's absolutely nothing constructive in it😅 this, this is the exact reason we turned it electric, we know what's going on with electric which means we don't get comments telling us were doing it wrong but not telling us how to do it right🙃✌️
@@RCunexttuesday that's fair enough, tune a 2T is not that easy if you don't know what and how to do it, just by the sound and how the car respond on throttle it's easy to know it's running lean, probably just need a 1/4 turn out on the low needle screw, top end it's a bit harder as you really need to listen to the engine and check the color of the spark plug, white/grey = lean, brown = perfect, black = too rich
@MotoMackUK this is a top tier comment that I thank you very much for my guy, appreciate the advice greatly🙏
Awesome!!! Really cool!
🔥🔥