Hi Tanmay mehta, Thanks for informative video. Regarding aurge protectors, these are low current rated ones, So I bought Vguard stabilizer DIGI-200, hope this will also help for same function. Some AV dealers suggest Servo stabilizer which has good control over voltage fluctuations. Any suggestion for budget Servo stabilizer in market?
Servo voltage stabilizers are perfect for use when there are frequent fluctuations in the power supply. In case of constant power failures, UPS is better!
Would it be ok to simply open the avr cover and clean the pcboard with a paint brush. Needless to say, the avr shohld first be unplugged from the wall power socket
Hey sir I want to buy a 5.1 home theatre under 80k with avr my choice is sonodyne micro 5.1 and yamaha 3072 avr . please recommend is it best under 80k or should I think of anything other?
Sonodyne Micro 5.1 is a good choice. For AVRm I think its wise to invest in Dolby Atmos AVR like Pioneer VSX-834 or Yamaha RX-V6A. Might have to stretch your budget by 10-15% but will help you with a great experience and futuristic system.
Dear Tanmay Sir, I have been using Marantz SR5003 7.1 channel AV Receiver (a marvelous performer) with Jamo speakers for last 13 years. Recently, one front speaker and one rear speaker AVR channels were detected to be dead. The defect was confirmed by connecting the speakers to working channels. So, speakers were alright. I think now it's time to upgrade. I have shortlisted Denon X1700 H to match my 55" LG Nano 83 and Jamo speakers. At the same time, am looking for getting SR5003 repaired as I am suspecting only a resistor or capacitor damage. But, I am not sure of repair agencies. Kindly, suggest on my overall approach.
Hello sir , I have Denon x2600h with Polk S55, S15 ,S30 , Rc80i & Hts 12 (5.1.2) and I am planning to buy Epson eh tw 7100 projector. Is 1000va /600 watt Apc ups is enough for all these equipments?? I am little confuse because I see Denon consume 500watt when active and Epson 7100 consume 406 watt during lamp on, then how 600w/1kva ups take all the load ??
Tanmay ji, I have got pioneer vsx 304 av receiver I updated this from my old yamaha 5.1 avr. Currently I have connected to yamaha speakers old ones, I have ordered taga harmony 607 as basic 5.0 with yamaha sw300 as subwoofer for lfe. Kindly provide your feedback on the 304 av receiver from pioneer and my speaker selection ( taga harmony 607) . I mainly watch movies with some stereo music in my rectangular living room and slowly plan to add proper Atmos speakers either as heights or in walls for Atmos experience.
I have Sony BDV E4100 blue ray 5 1 speaker system Can i use its speakers purchase 7 2 channeln a v receiver ,add atmos spekers and create dolby atmos setup ?
Hey Tanmay, thanks for this informative video.. in my setup I have connected my Sony 43'' led tv + XBox + AV Receiver(Yamaha HTR 2064) to a 3 amps VGuard stabilizer. Will it be sufficient? Also I like to add a surge protector. can i connect the belkin surge protector to my stabilizer and then connect my devices to surge protector? Plz advice.. cheers!!!
Vguard stabilizer can take care of your surges and spikes. So you can avoid the belkin. With regards to 3Amps Power, I guess, you will have to verify your product requirements; whether they need 3 or 5 Amperes.
@@TanmayMehta Thanks sir, both links are surge protectors, is it surge protectors enough? One more thing sir, Speakers wire should be 16 gauge or 14/12 gauge needed for the above setup
Need help, talk to us -
bit.ly/GBAVIBA
Huge helpful information, love from Kolkata
Very valuable info sirji....tnx
Hello sir your all series are informative and make easy to take a decision.
Hey Balaji Thank you so much and Iam glad that it helped you in making decision
Hi Tanmay mehta, Thanks for informative video. Regarding aurge protectors, these are low current rated ones, So I bought Vguard stabilizer DIGI-200, hope this will also help for same function.
Some AV dealers suggest Servo stabilizer which has good control over voltage fluctuations. Any suggestion for budget Servo stabilizer in market?
Servo voltage stabilizers are perfect for use when there are frequent fluctuations in the power supply. In case of constant power failures, UPS is better!
Good sharing sir
Would it be ok to simply open the avr cover and clean the pcboard with a paint brush. Needless to say, the avr shohld first be unplugged from the wall power socket
Home UPS can protect all these equipments right?
Make a review on Yamaha RX-V6A, bro.
Hi Varshan
Will try to do as soon as possible
Hey sir I want to buy a 5.1 home theatre under 80k with avr my choice is sonodyne micro 5.1 and yamaha 3072 avr . please recommend is it best under 80k or should I think of anything other?
Sonodyne Micro 5.1 is a good choice. For AVRm I think its wise to invest in Dolby Atmos AVR like Pioneer VSX-834 or Yamaha RX-V6A. Might have to stretch your budget by 10-15% but will help you with a great experience and futuristic system.
Dear Tanmay Sir, I have been using Marantz SR5003 7.1 channel AV Receiver (a marvelous performer) with Jamo speakers for last 13 years. Recently, one front speaker and one rear speaker AVR channels were detected to be dead. The defect was confirmed by connecting the speakers to working channels. So, speakers were alright. I think now it's time to upgrade. I have shortlisted Denon X1700 H to match my 55" LG Nano 83 and Jamo speakers. At the same time, am looking for getting SR5003 repaired as I am suspecting only a resistor or capacitor damage. But, I am not sure of repair agencies. Kindly, suggest on my overall approach.
Thanks for your message. Drop a text on bit.ly/mehtanmay and will share the contact details of Marantz service executive 👍🏻
Great video...keep up the good work...what do you think of a digital stabilizer?
Hi Sambhu
It's good, but it only deals with voltage fluctuations, online UPS does both work of voltage fluctuation and power back up
@@TanmayMehta appreciate it..
Voltage stabilizer can use to prevent the surge
I am using a 6kv v guard stabilizer .
Hi. Tanmay. My problem is I'm staying near creek side most of my equipment get corbon and it gets spoil very fast. What can I do. Please help.
Hello sir , I have Denon x2600h with Polk S55, S15 ,S30 , Rc80i & Hts 12 (5.1.2) and I am planning to buy Epson eh tw 7100 projector. Is 1000va /600 watt Apc ups is enough for all these equipments?? I am little confuse because I see Denon consume 500watt when active and Epson 7100 consume 406 watt during lamp on, then how 600w/1kva ups take all the load ??
How to select suitable ups for all in one tv, avrx, player, subwoofers. Which one is opt me.
you need to check the power consumption of each product and choose accordingly
Any ups for marantz 5013 +epson 750
You can check APC Ups. The links are shared in description
Tanmay ji, I have got pioneer vsx 304 av receiver I updated this from my old yamaha 5.1 avr. Currently I have connected to yamaha speakers old ones, I have ordered taga harmony 607 as basic 5.0 with yamaha sw300 as subwoofer for lfe. Kindly provide your feedback on the 304 av receiver from pioneer and my speaker selection ( taga harmony 607) . I mainly watch movies with some stereo music in my rectangular living room and slowly plan to add proper Atmos speakers either as heights or in walls for Atmos experience.
That's a great 9channel AV Receiver. You can check our latest video on best tips for Atmos Speakers. Will surely help you!
I have Sony BDV E4100 blue ray 5
1 speaker system
Can i use its speakers purchase 7
2 channeln a v receiver ,add atmos spekers and create dolby atmos setup ?
No, you need to have Channel AVR with Dolby Amos compatibility
Hey Tanmay, thanks for this informative video.. in my setup I have connected my Sony 43'' led tv + XBox + AV Receiver(Yamaha HTR 2064) to a 3 amps VGuard stabilizer. Will it be sufficient? Also I like to add a surge protector. can i connect the belkin surge protector to my stabilizer and then connect my devices to surge protector? Plz advice.. cheers!!!
Vguard stabilizer can take care of your surges and spikes. So you can avoid the belkin. With regards to 3Amps Power, I guess, you will have to verify your product requirements; whether they need 3 or 5 Amperes.
Tanmay ji, can you please suggest good Stabilizer to Denon 2700h AVR plus Q Acoustics 5.1.2 setup?
Hi Murali ji
Here are the few options Iam sharing you the links for you amzn.to/377V6v5
amzn.to/3dtgY54
@@TanmayMehta Thanks sir, both links are surge protectors, is it surge protectors enough?
One more thing sir, Speakers wire should be 16 gauge or 14/12 gauge needed for the above setup
how to lock limit of volume in AVR?
Hi
Almost every AVR has audio set up where you can limit the volume levels