@@freddyramirez1820Wrong! When you mix saw dust, preferably dust from the same piece of wood, with wood glue you don’t see glue. It just looks like wood.
@keithglf once you decide to add stain or any actual finisb, you will see the glue..that is one of the worst tips that was ever spread in the woodworking world.. unless you want to leave it just bare and only add oil..you could get away with that hack..but its always just better to use woodfiller. Thats what its for.
It’s Osmo 3044 (raw). It’s unusual to use this particular version of Osmo on a dark walnut piece as it’s intended for light woods like birch, maple, or ash. It’s designed to finish these lighter species without yellowing. Truly excellent finish
Looks good, but will it last? Wood bending is very slow and delicate process and the results are phenomenal when it is done right. You would get smooth curve, not looking like poligons from some game.
It would take a very involved steam setup for traditional woodbending of this thickness - otherwise it would have to be bent lamination. I think this was quite inventive and I don't see why this particular piece would not last the test of time. Perhaps a biscuit on the butt joint might be wise though.
Красота, отличная идея, а какой расчёт глубины погружения фрезы, браво. Кстати мне ни разу не попадалась такая коническая фреза. Но теперь я сохраню эту идею, для дальнейшего облагораживания дома.
I used to think that too but I saw a video of them testing that and it’s essentially the same strength since wood glue is stronger than the bonds between wood fibers
@daveklein2826 I mean, I've dropped a picture frame on the corner & had the frame break before. End grain glue ups just really aren't super strong, but you do you boo.
The guy can't reply to you about the router bit because he doesn't know, since this isn't his video. He stole the video from the actual creator and posted it as his own.
I did this with my 3 stack of floating shelves. To get them rounded, I started to through the tiny veneer created at the bottom of the cut out. Lines are way worse than angled wood. I actually like the way mine turned out with the angular shape.
Great video, fun music, interesting project, not long. Great Job! Could you please add to the description the type of wood (looks like black walnut to me) and what you used for the finish?
180 degrees, divided by the number of kerfs equals the desired included angle of the bit (approximately). The spacing between the cuts determines the outside radius or diameter of the bend. So desired radius times pi (divided by two for the 180 degree bend). Something like that I think maybe
@@KyleWilloughby-r1k ahh, pretty simple. So in other words, 180 divided by the angle of the bit (kerf)? Then depending on the size that you want, the tighter spacing the smaller curve, the wider the spacing the bigger the curve?
Both Matthew Peech and Tamar 3x3 custom channels have full how to videos on this technique. By cutting the kerfs not all the way through, the wood becomes pliable.
Wie berechnet man die Anzahl der Rillen, die Abstände zueinander und die Tiefe der Rillen im Verhältnis zum Werkstück, damit es dann eine 90° oder 180° Kurve wird ?
@Heroturtle , con una tira de cartulina haz una curva y define el tamaño del semi círculo de uno de los extremos del mueble. Elige una medida par o múltiplo de 3 , las distancias entre ranuras son de 2 a 3 cm.
Some things just do not appeal. Kidney-shaped tabels, and these whatever-you-wanna-call-thems. They inhabit s gray zone. Not honest and straightforward (square and such) yet not sufficiently elaborate like a Louis XV cabinet, that we might applaud the craftsmanship and daring design. It’s like the dashboard of a car that flopped.
Make your own content instead of posting others’ work without crediting them
Wessen Arbeit ist es denn? Gibt es ein Patent?
This looks similar to a woodworker who posted an identical video, I was wondering the same thing
@@birwatihorhe9033it’s not about legality, it’s about morality.
@@davidswanson5669 people want to make money, its not about morality, its about ideology
can you link the other creator? i want to appreciate him and that router bit :)
Saw dust in the cracks mixed with the glue especially on the edges would have been good for filling those small gaps from the routing.
No, nobody wants to see glue in the joints either..use wood filler...thats what its for
@@freddyramirez1820Wrong! When you mix saw dust, preferably dust from the same piece of wood, with wood glue you don’t see glue. It just looks like wood.
@keithglf once you decide to add stain or any actual finisb, you will see the glue..that is one of the worst tips that was ever spread in the woodworking world.. unless you want to leave it just bare and only add oil..you could get away with that hack..but its always just better to use woodfiller. Thats what its for.
@@keithglfэто если бесцветным покрытием покрывать. Во всех остальных случаях морилка не впитается и будут пятна там где был клей
Cool, how did you figure out how many grooves to route out?
There are kerf calculators online where you enter the different data (angle of bend, thickness of wood, taper size, etc.).
What's the name of the router bit, that is used in the beginning. Searched for something like that, but found nothing ...
Tapered bit.
Нужно было в клей опилки подмешать - швы от фрезы были бы менее заметны
Was that a wood glue finish?
I think it is OSMO oil.. maybe
It’s Osmo 3044 (raw). It’s unusual to use this particular version of Osmo on a dark walnut piece as it’s intended for light woods like birch, maple, or ash. It’s designed to finish these lighter species without yellowing. Truly excellent finish
Looks good, but will it last? Wood bending is very slow and delicate process and the results are phenomenal when it is done right. You would get smooth curve, not looking like poligons from some game.
It would take a very involved steam setup for traditional woodbending of this thickness - otherwise it would have to be bent lamination. I think this was quite inventive and I don't see why this particular piece would not last the test of time. Perhaps a biscuit on the butt joint might be wise though.
Если честно, не фонтан, видны заломы снаружи. Немешало шлифануть.
How have you calculated the distance between the cuts?
There are online kerf calculators.
Anyone know what bit is used here?
it's in the video...
Looks awesome
Saludos
Muy buen tip para hacer curvas en madera
Parabéns pelo trabalho, excelente profissional, muito habilidoso 👏👏👏
Cool AF!
My thoughts....The cat will love it!
Красота, отличная идея, а какой расчёт глубины погружения фрезы, браво. Кстати мне ни разу не попадалась такая коническая фреза. Но теперь я сохраню эту идею, для дальнейшего облагораживания дома.
Fantástico!!!
Auriez vous une référence pour la mèches pour effleureuse ??? Merci.
What bit is used?
Вначале ведь есть футляр от фрезы со всеми параметрами, ты что?
Can you please tell me about bit? which bit you use for this project?
Еврейский Dimar для CNC , долларов за 250 . Сломается эта иголка и проклянёшь себя за то , что взялся изготовить эту залупу. 🤣🤘🤣
Очень клёвая фреза 👍👍👍
Those are all endgrain glue joints...aren't they gonna fail eventually without some sort of spline or reinforcement?
I used to think that too but I saw a video of them testing that and it’s essentially the same strength since wood glue is stronger than the bonds between wood fibers
No
@@daveklein2826 amazing reasoning, thanks for your input. 👍🏼
I’m not saying I’d do it, I’m just saying the results of a video I saw
@daveklein2826 I mean, I've dropped a picture frame on the corner & had the frame break before. End grain glue ups just really aren't super strong, but you do you boo.
I need a bit like that!
love it...what is this bit you are using, what size, what is the name os this machine?
Bosch PBD 40. Mine wobbles quite a bit, but it's still usable for wood. Bit looks like a 10mm from this side of the screen 😅
I don't think she was referring to the drill press my friend. Miss, it's called a Router
@@ericbstudios9807 Thank you!
what kind of wood it is?
Looks like black walnut
Well done!!!!
❤👏❤️👏❤️👏❤️👏❤️👍
Не могу понять, на кой грех эта заморочка? Для чего?
Puro arte
Awesome tool!
Great, how much space between each slot?
Donde o cómo se consigue la broca de cortar.
I want that bit!
What was the finish oil?
Water based poly.
Link to router bit??
Please
@fergalhopkins1230 , no lo sabe xq toma material gráfico que no produce él. (y no da crédito!)
@@lehunghuy
What size cutter was that, please?
Where did you purchase the router bit?
What is the name of that router bit?
Should have cut it long and done one or more dovetail joints to keep it from failing down the road.
😂😂😂😂😂😂😂😂
Wonderful
Awesome wood bending!!!! Congrats!!! What is the router bit? Can you send its link?
I’d like to know the name of that bit as well if anyone knows.
This method of cutting groves is how we were taught how to make water skis in high school woodshop.
@@nelsonbrutman7956 I think I found the name of the bit. It’s a “tapered ball nose carving bit”.
The guy can't reply to you about the router bit because he doesn't know, since this isn't his video. He stole the video from the actual creator and posted it as his own.
@@zubrismusicYes
Many thanks ❤
Bit kaha milega ye wala and bit size
A little sanding could have gotten the flat spots out of the bends.
I did this with my 3 stack of floating shelves. To get them rounded, I started to through the tiny veneer created at the bottom of the cut out. Lines are way worse than angled wood. I actually like the way mine turned out with the angular shape.
Great video, fun music, interesting project, not long. Great Job! Could you please add to the description the type of wood (looks like black walnut to me) and what you used for the finish?
Stolen content
BIT NAME ?
Setakat ni..inilah yg terbaik untuk buat bentuk lengkung...
How are you not gonna sand the outer face of the kerf?
You could see the bumps. Didn't leave much material too sand though
That is very nice ❤
Great video! I love the part where you show how you float it on the wall!! Clear as mud. Lol
Hahaha 😂 I was trying to figure out why he drilled the holes on the end
Maybe a rod mount that goes into the stud
Just a floating shelf kit or he made his own. Very simple.
What bit is this?
what was the milling tool in the beginning (name)?
It's a trim router.
@@rencleavus5213 thanks 👍
I've seen John Malecki try this. lol
How did you know which bit to use to make that angle ? Or did you use any bit and given the curve generated you glue other wood pieces?
180 degrees, divided by the number of kerfs equals the desired included angle of the bit (approximately). The spacing between the cuts determines the outside radius or diameter of the bend. So desired radius times pi (divided by two for the 180 degree bend). Something like that I think maybe
@@KyleWilloughby-r1k ahh, pretty simple. So in other words, 180 divided by the angle of the bit (kerf)? Then depending on the size that you want, the tighter spacing the smaller curve, the wider the spacing the bigger the curve?
Typically when you buy router bits they say what angle
Che tipo di legno è?
Whats the name of the bit
Maybe to the first guy with the idea it was Challenging?! But it looks ridiculously simple at this point
А распаривать перед загибом нужно? или и так согнется?
Мягкое (эластичное) дерево, по идее, и так согнуть можно. Только, как мне кажется, шлифовать все равно пришлось бы, волокна вылезут
Both Matthew Peech and Tamar 3x3 custom channels have full how to videos on this technique. By cutting the kerfs not all the way through, the wood becomes pliable.
Wie berechnet man die Anzahl der Rillen, die Abstände zueinander und die Tiefe der Rillen im Verhältnis zum Werkstück, damit es dann eine 90° oder 180° Kurve wird ?
@Heroturtle , con una tira de cartulina haz una curva y define el tamaño del semi círculo de uno de los extremos del mueble. Elige una medida par o múltiplo de 3 , las distancias entre ranuras son de 2 a 3 cm.
@@MiguelAngel-ss7qg Just saved, vielen Dank, Gracias!
Need to hide the router cuts better I think. Although not sure how lol
La pura diversión!!!
Cool
I expected a speaker enclosure.
Щели надо было зашпатлевать опилками того же изделия!!!
Пылью
@zy6vj правильно
Glue control. A little goes a long way.
Nice
Nice handywork
How is that DYI?
How is it not DIY
@@daveklein2826 if you have all that machines, your a professional, thats what you do for living
Слишком явно видны углы изгиба
Just perfect work. And great choice of music:)
A stolen video from another creator
@@davebaker1325 Who made the video originally?
"easy woodworking project" & "quite a challenge"
make up your mind!
qual é o espaço entre um corte e outro?
Piękna robota.🤝
olá bom dia muito bom seu vídeo! assim fica bem mais fácil fazer os cortes e rápido! melhor q na policorte de bancada!
Nice job. Did you snap few before getting the depth right?
Wah keren mata mata routernya
They sell banding panel.
So?
excelente me regusta
I wonder how hard it would be to steam bend this shape. The router lines spoil the flow for me.
Hard. Factory use amonina to soften lignan.
Molto utile e versatile.
Felicidades a la electricidad.
La carpintería desapareció.
Qual o nome da fresa ?
Представляю сколько фрез сточил пока нужный радиус не поймал👍
Всё математически вывести легко
Ide bagus 👍🏻
Some things just do not appeal. Kidney-shaped tabels, and these whatever-you-wanna-call-thems. They inhabit s gray zone. Not honest and straightforward (square and such) yet not sufficiently elaborate like a Louis XV cabinet, that we might applaud the craftsmanship and daring design. It’s like the dashboard of a car that flopped.
Genial
Wo bekommt man den Fräser!
I've been a carpenter for my whole life and this is amazing to me
Alguien sabe como se llama esa fresa?
Как называется фреза?
How cool………
Process called Kerfing
That's intense. Well done.
Как расчитать расстояние между пропилами?
Great job what kind of bed is that how they call them?
Would love to know how too exactly do this
Measurements & so forth
They sell them at Kmart 😂
Super cool 😎
А зачем надо было клей на плоскость наносить?
tite bond finish? this is an ad for tite bond??? .... :-)
Give bond was not used as a finish😂😂😂😂😂😂😂😂
love it.
What’s the use if you can see all the relief cuts, there’s no professionalism here unless that was just out of curiousity
Поставь туда динамики и закрой их ретро сеточкой
Sand flat round