Can you help me please, install an android radio to an amplified Wrangler Original, I don't have sound output in the back or subwoofer, should I use the same interface to enable everything?
I have a Jeep commander 2009 will the parts used on the video fit on it ? I already bought the stereo I’m missing the module interface, the harness and the kit base
Great video!! Congratulations and thank you, this video helped me much! Im installing in my Jeep commander 2007 with boston audio a alpine iXL-507 stereo, but I dont know if I must connect the wire "POWER ANT / SUB - AMP of interface crux. Could you helo me with this doubt?
Just an update, this video does not apply to 2008 model year. At least the Limited and most likely 09 and 10 models. I just did my 2008 Limited with Boston Acoustic factory option. Just reading the title I assumed this would apply to my 2008 Commander, nope! The factory HU was a RER 730N. Touch screen was just about done for, made it impossible to use. Using the suggested accessories, I was able to retain complete functionality of the factory experience. I choose an Alpine iLX-F509 HU. Just amazing! Everything works, steering wheel volume controls, factory backup cam, not a single thing lost. Just a bad ass 9" wireless Car Play HU that should outlast the vehicle. Let's hope so, he's only 16 and boys will be boys. flawlessly Super simple now, not like this was difficult on this 06. These are my instructions based on the above specs: 1. Turn the key on and put the car in drive, to get gear shift leaver out of the way. 2. Disconnect Battery 3. Remove chrome ring around gear selector (only clips) 4. Remove black surround around the gear selector (only clips) 5. Remove rubber tray insert from the storage area at the bottom of the climate controls. 6. Remove Cross headed screw in the back on the storage area 7. From the bottom start prying off the climate controls. Just clipped in. 8. Remove 4 screws and remove factory Head Unit. 9. Done You no longer need to remove the 16 Alen bolts and remove the dash bezel. Just completely different in the 2008 that I have. The rest of the video is bang on.. Big shout out to these guys for getting me on my way. Job well done. You guys are good! You have another subscriber :)
Those nav radios in the Commanders and Grand Cherokees (as well as other Chrysler/Dodge/Jeep products) tend to have problems... we had an '05 Grand Cherokee with the same radio, and by the time we traded it in, the radio no longer worked.
Great video! Thank you. I have the same setup you are installing and it's going into my 2007 Jeep commander. I had 1 snag and that is the antenna adapter from Metra that you are using. However, the one I got has a completely different connector from the 1 you are using and it won't plug into the dash antenna lead. I Ordered in the one you spec'd out 40-EU10...any suggestions on what I should get that will mate to the dash antenna lead? Hope you can help. Thanks again for a superb video!
Hey there, Jeep changed the antenna adapter from the 40-CR10 (2006 - 2007) to the 40-EU10 (2008-2010) mid generation! I have those linked in the description.
hey will this hook up to your factory reverse camera as well will it connect to my factory back seat entertainment system with the monitor in 2010 commander limited
Hello, good afternoon, you know that I also have a Komander and I made this one the same. Maybe you did it, but the steering wheel controls do not work, the amplifier did work, and everything except the steering wheel controls.
Can these wiring harnesses you've listed work with a different stereo purchase? I ask because I noticed when I clicked the link for the stereo you used there were other options that were less expensive
For the most part yes. The only difference may be the steering wheel volume control compatibility. This is a pretty cheap radio, anything less expensive generally are no-named cheap Chinese units that may cause you more problems then they are worth.
Followed instructions to a T but mine wouldn’t turn on or anything when I installed. Screen is black, no sound, nothing. Any ideas? Also, the antenna you linked in the video isn’t the right one
Hey there, Jeep changed the antenna adapter from the 40-CR10 (2006 - 2007) to the 40-EU10 (2008-2010) mid generation! I have those linked in the description, so be sure to get the correct one for your year! As for no power, send us a message on facebook and we can assist!
I have a 2006 commander and I have bought this harness. There is an extra connector in the dash that I see in your video that you didn’t hook up how come? And what is it used for. It plugs into the stock radio but I don’t see a connector for it on the new harness.
I'm having trouble with the swc cable, I don't know where to connect it. In your video you plug it into the red end but mine doesn't have that....I'm lost
@@ProvoBeastAudio yeah true. I bought everything listed in this video except the head unit, I bought a different one as it had a USB input right on the front of the unit so I didn't have to run that flush mount USB. Anyway the harness that came with the head unit didn't have that female 3.5mm plug like the one in this video so the crux kit says to cut off the 3.5mm male end and wire it in using key1 and key2 wires except my harness only has one labeled key1 and the only other wire not being used is a blue one labeled antenna
Hey there, Jeep changed the antenna adapter from the 40-CR10 (2006 - 2007) to the 40-EU10 (2008-2010) mid generation! I have those linked in the description.
Most circumstances there isn't a harness available for this generation to retain that camera, so we usually manually wire in an RCA connections for that factory camera (if so equipped). We used that technique in this video: ruclips.net/video/k7vFBY82qPY/видео.html
I have the BASIC radio with only the 16pin harness and antenna. What is a good plug that I could use without wasting all that extra money? It’s a 2006 Jeep Commander.
I installed the 9" tablet stereo, I cant figure out how to bolt it down when its already in, It can only slide in from the front when everything is put back together
I have 2010 Cherokee finally got my radio to turn on I have no sound I have e red and yellow wires hooked together do I use the blue and white wire from my harness
Can you confirm if the Scosche CRTCR01 Camera Retention wire harness is compatible with Jeep. I followed the link to Amazon but then there are comments the adapter is not and then Scosche is saying they made an error and there is no harness available for jeep. I saw your work-around but would like to avoid splicing wires if I could.
Thank you so much. My 2010 Jeep Commander Limited RER head unit is deceased and looking to replace with the Dual DMCPA70. But primarily to ensure I keep the backup camera. I have steering wheel controls and the Boston factory amp. Can you confirm I have the correct parts for this new head unit. Thank so very much for your RUclips Video. Crux SWRCR-59 (interface) ; Metra 99-6510 (dash kit) ; Metra 40-CR10 (antenna adapter); Batige USB Shell Car Dashboard Flush Cable.
Yes it will. Most circumstances there isn't a harness available for this generation to retain that camera, so we usually manually wire in an RCA connections for that factory camera (if so equipped). We used that technique in this video: ruclips.net/video/k7vFBY82qPY/видео.html
Hey, do you know how, or if it is even possible to retain the rear view camera? I have an 06 commander (factory nav) with a kenwood head unit. Everything else is working great.
Just FYI, the link for the back up camera harness is for '08 and later. I checked out your video '05-'10 Jeep Grand Cherokee, and I was able to make my own harness from there!
Son dos cables de alimentaciòn,uno que csi siempre es amarillo va a la bateria,lleva energia todo el tiempo pero el rojo va a la llave que es el que lo enciende y apaga.el problema es que unen los dos cables y segun en cual lo amarren o queda siempre prendida o cuando cierras la llave se apaga totalmente y cuando enciendes el radio se reinicia cada vez.-
Yes it will. Most circumstances there isn't a harness available for this generation to retain that camera, so we usually manually wire in an RCA connections for that factory camera (if so equipped). We used that technique in this video: ruclips.net/video/k7vFBY82qPY/видео.html
@@SoCalSurfer69 Sure, but units with native navigation (not rendered from carplay or android auto) are very pricy for a brand named ones. If you want that recommendation, send us a message on facebook and we can assist!
Parts used linked in the description of the video!
Can you help me please, install an android radio to an amplified Wrangler Original, I don't have sound output in the back or subwoofer, should I use the same interface to enable everything?
@@rmanuelchg1345 iiii
I have a Jeep commander 2009 will the parts used on the video fit on it ? I already bought the stereo I’m missing the module interface, the harness and the kit base
do the harnesses work with all radios or only the one in this video
Very educational. I'm doing a 2007 commander tomorrow and this showed me exactly wat I'm getting into thank you so much
Did it work, DVD player and all working properly?
Great instructional video
Great video!! Congratulations and thank you, this video helped me much! Im installing in my Jeep commander 2007 with boston audio a alpine iXL-507 stereo, but I dont know if I must connect the wire "POWER ANT / SUB - AMP of interface crux. Could you helo me with this doubt?
Just an update, this video does not apply to 2008 model year. At least the Limited and most likely 09 and 10 models. I just did my 2008 Limited with Boston Acoustic factory option. Just reading the title I assumed this would apply to my 2008 Commander, nope! The factory HU was a RER 730N. Touch screen was just about done for, made it impossible to use. Using the suggested accessories, I was able to retain complete functionality of the factory experience. I choose an Alpine iLX-F509 HU. Just amazing! Everything works, steering wheel volume controls, factory backup cam, not a single thing lost. Just a bad ass 9" wireless Car Play HU that should outlast the vehicle. Let's hope so, he's only 16 and boys will be boys.
flawlessly
Super simple now, not like this was difficult on this 06.
These are my instructions based on the above specs:
1. Turn the key on and put the car in drive, to get gear shift leaver out of the way.
2. Disconnect Battery
3. Remove chrome ring around gear selector (only clips)
4. Remove black surround around the gear selector (only clips)
5. Remove rubber tray insert from the storage area at the bottom of the climate controls.
6. Remove Cross headed screw in the back on the storage area
7. From the bottom start prying off the climate controls. Just clipped in.
8. Remove 4 screws and remove factory Head Unit.
9. Done
You no longer need to remove the 16 Alen bolts and remove the dash bezel. Just completely different in the 2008 that I have.
The rest of the video is bang on..
Big shout out to these guys for getting me on my way. Job well done. You guys are good!
You have another subscriber :)
Does it also work with the second row DVD player?
Excelldent instructioon
Those nav radios in the Commanders and Grand Cherokees (as well as other Chrysler/Dodge/Jeep products) tend to have problems... we had an '05 Grand Cherokee with the same radio, and by the time we traded it in, the radio no longer worked.
Great video! Thank you. I have the same setup you are installing and it's going into my 2007 Jeep commander. I had 1 snag and that is the antenna adapter from Metra that you are using. However, the one I got has a completely different connector from the 1 you are using and it won't plug into the dash antenna lead. I Ordered in the one you spec'd out 40-EU10...any suggestions on what I should get that will mate to the dash antenna lead?
Hope you can help. Thanks again for a superb video!
Hey there, Jeep changed the antenna adapter from the 40-CR10 (2006 - 2007) to the 40-EU10 (2008-2010) mid generation! I have those linked in the description.
hey will this hook up to your factory reverse camera as well will it connect to my factory back seat entertainment system with the monitor in 2010 commander limited
Hello, good afternoon, you know that I also have a Komander and I made this one the same. Maybe you did it, but the steering wheel controls do not work, the amplifier did work, and everything except the steering wheel controls.
Can these wiring harnesses you've listed work with a different stereo purchase? I ask because I noticed when I clicked the link for the stereo you used there were other options that were less expensive
For the most part yes. The only difference may be the steering wheel volume control compatibility. This is a pretty cheap radio, anything less expensive generally are no-named cheap Chinese units that may cause you more problems then they are worth.
need to show bow to do it with a non nav unit...
and also where can j get a dash with the nav citout..
dj t wanna cut my original dash up
Will this work with the factory back up camera in a 2007 Jeep Commander that has the premium system with NAV ?
We have AV system as well...will this same set-up work? (We don't use the AV any longer, just the Aux jack to run phone through). Thanks.
Great video. Did the same exact install. However I have a noticeable hum coming out of the speakers...any help?
Me as well, can't figure this out. It's got me stumped, I have triple checked everything little thing.
The CRUX steering wheel control kit, will it work with all aftermarket stereos or just the DUAL? I've got a single DIN clarion Cz702, will it work?
Works with most aftermarket radios, yes.
Followed instructions to a T but mine wouldn’t turn on or anything when I installed. Screen is black, no sound, nothing. Any ideas?
Also, the antenna you linked in the video isn’t the right one
Hey there, Jeep changed the antenna adapter from the 40-CR10 (2006 - 2007) to the 40-EU10 (2008-2010) mid generation! I have those linked in the description, so be sure to get the correct one for your year! As for no power, send us a message on facebook and we can assist!
I have a 2006 commander and I have bought this harness. There is an extra connector in the dash that I see in your video that you didn’t hook up how come? And what is it used for. It plugs into the stock radio but I don’t see a connector for it on the new harness.
Other factory ancillary wiring support for the factory radio that isn't used by the aftermarket head unit. It isn't needed or used in our application.
Ok thank you I had the same question 🙏🏽 appreciate that.
I'm having trouble with the swc cable, I don't know where to connect it. In your video you plug it into the red end but mine doesn't have that....I'm lost
All depends on the brand of radio and the harness adapter you are using. Way too many variables to help until we get more info
@@ProvoBeastAudio yeah true. I bought everything listed in this video except the head unit, I bought a different one as it had a USB input right on the front of the unit so I didn't have to run that flush mount USB. Anyway the harness that came with the head unit didn't have that female 3.5mm plug like the one in this video so the crux kit says to cut off the 3.5mm male end and wire it in using key1 and key2 wires except my harness only has one labeled key1 and the only other wire not being used is a blue one labeled antenna
my 2006 jeep commander's antenna adapter is different and the one currently in the bio didn't work, did you use a different adapter?
Hey there, Jeep changed the antenna adapter from the 40-CR10 (2006 - 2007) to the 40-EU10 (2008-2010) mid generation! I have those linked in the description.
Does this wiring include comparability for the factory backup camera or does that take extra work?
Most circumstances there isn't a harness available for this generation to retain that camera, so we usually manually wire in an RCA connections for that factory camera (if so equipped). We used that technique in this video: ruclips.net/video/k7vFBY82qPY/видео.html
@@ProvoBeastAudio This is perfect - thanks!
I have the BASIC radio with only the 16pin harness and antenna. What is a good plug that I could use without wasting all that extra money? It’s a 2006 Jeep Commander.
Hey there, for the super basic harness adapter (no factory amp, no steering wheel volume controls), here you go: amzn.to/44t5GXR
I installed the 9" tablet stereo, I cant figure out how to bolt it down when its already in, It can only slide in from the front when everything is put back together
That’s the risk you run into when installing noname android units
Help. I have the 2006 Commander with the Boston Acoustics amp. Frequently goes bad. Is there any way to bypass the amp?
Yep! And we actually did on this commander as well. We should have the footage up soon.
I have 2010 Cherokee finally got my radio to turn on I have no sound I have e red and yellow wires hooked together do I use the blue and white wire from my harness
Sounds like you have the wrong harness adapter. We can help you if you send us a message on Facebook or instagram.
Can you confirm if the Scosche CRTCR01 Camera Retention wire harness is compatible with Jeep. I followed the link to Amazon but then there are comments the adapter is not and then Scosche is saying they made an error and there is no harness available for jeep. I saw your work-around but would like to avoid splicing wires if I could.
Sure is. Used it many times!
Thank you so much. My 2010 Jeep Commander Limited RER head unit is deceased and looking to replace with the Dual DMCPA70. But primarily to ensure I keep the backup camera. I have steering wheel controls and the Boston factory amp. Can you confirm I have the correct parts for this new head unit. Thank so very much for your RUclips Video. Crux SWRCR-59 (interface) ; Metra 99-6510 (dash kit) ; Metra 40-CR10 (antenna adapter); Batige USB Shell Car Dashboard Flush Cable.
Will this installation support the rear screen? To play video for my kids?
Yes, I've linked that harness in the description of the video (2008-2010) years: amzn.to/3Je6KYw
how about the 2006 Jeep Commander with rear seat tv? will the 2008 one work?
Does this radio work with the back up camera as well?
Yes it will. Most circumstances there isn't a harness available for this generation to retain that camera, so we usually manually wire in an RCA connections for that factory camera (if so equipped). We used that technique in this video: ruclips.net/video/k7vFBY82qPY/видео.html
Hey, do you know how, or if it is even possible to retain the rear view camera? I have an 06 commander (factory nav) with a kenwood head unit. Everything else is working great.
Yes, harness linked in the description.
@ProvoBeastAudio Thanks so much!
Just FYI, the link for the back up camera harness is for '08 and later. I checked out your video '05-'10 Jeep Grand Cherokee, and I was able to make my own harness from there!
I installed this in my commander color to color but radio doesn't turn off when car is turned off. Any opinions? Jeep commander 06 no nav
Son dos cables de alimentaciòn,uno que csi siempre es amarillo va a la bateria,lleva energia todo el tiempo pero el rojo va a la llave que es el que lo enciende y apaga.el problema es que unen los dos cables y segun en cual lo amarren o queda siempre prendida o cuando cierras la llave se apaga totalmente y cuando enciendes el radio se reinicia cada vez.-
@@oliverculver no. Entendi bien u comentario me lo puedes explicar pf. El de acc no se conecta?
Could I use a Sony XAV-AX1000 as the stereo and still retain all the factory features?
Sure any standard double din will fit.
@@ProvoBeastAudio is the harness situation the exact same?
@@ProvoBeastAudio and how do I know if it supports steering wheel controls and all that jazz.
@@GameToxin Yes, the Crux harness will support any double din. See the description for the parts specific to your year and trim.
What about the mirror controls and is it truly Bluetooth where I do not have to go to USB
Yes has Bluetooth, no this specific radio doesn’t have mirror link
Will this work with factory backup camera?
Yes it will. Most circumstances there isn't a harness available for this generation to retain that camera, so we usually manually wire in an RCA connections for that factory camera (if so equipped). We used that technique in this video: ruclips.net/video/k7vFBY82qPY/видео.html
At 7:15 it appears there are two blue/blueish wires going to one wire- will you please clarify what’s happening there?
blue is typically a remote turn on, i could be wrong for this harness, but every stereo i have installed it is usually a remote turn on for an amp.
I’m having so much trouble installing mine 😢
did u end up figuring it out?
Where can i avail this kind of radio
We linked everything in the description of the video!
Is that commander for sell?
I have a 06 commander and the amp died. How do I bypass it. I only have sound from front speakers.
We have a video coming soon actually! But you will need this harness: amzn.to/36uo3n3
@@ProvoBeastAudio Can the amp be changed out to a standard aftermarket amp?
@@SoCalSurfer69 If you are running aftermarket speakers, sure. If still running factory, not needed.
@@ProvoBeastAudio I want to upgrade the radio from what it currently has to one with better bluetooth and nav. Any recomendations?
@@SoCalSurfer69 Sure, but units with native navigation (not rendered from carplay or android auto) are very pricy for a brand named ones. If you want that recommendation, send us a message on facebook and we can assist!
About what did everything cost you?
Parts are linked in description for current price, labor rates will vary based on your local shop (or unless you tackle this yourself!)