I’ve got this almost exact issue on my monk angled skeletonized adapter. Imma take it apart in the morning and check it out. Mine is not as severe but it jams up often on a single stack for aap01. Such a pain.
@old man strength I don’t have a Tapp Adapter but I’m pretty sure if you make the hole on both parts it’ll work. Part 1 the mag section where the M4 goes and part 2 the hole on the small piece that goes on the Hi-Capa mag
I ha e a different HPA Mag Adapter but im having the same kind of issue. The bbs go to the top of the mag and shoot fine for like 15 shots and then the bbs fail to load to the top of the mag and i have to flip the mag upside down and tap it to get it to shoot another 15 shots. Will this fix it? Im also having feeding issues with the mag.
Can I ask did you grind the wrong piece ? I’m seeing the mag base being the only point to be grinded ?? Bottom of the hole needs a bit of bottoming out ? Anyone see the same before I go forward?? Lol
Do you have an issue aswell with the air sealing inbetween the adapter an the magazin? Because everytime i put my AAP 01 with the adapter against my shoulder i lose a little bit of air
i have similar problem, it does feed a little, but after one shot BBs are stuck. Do you think this will solve the problem? it looks like a simmilar issue
I just bought a euro adapter just like the monk with the SAME problem thank you for making this
You’re welcome
I’ve got this almost exact issue on my monk angled skeletonized adapter. Imma take it apart in the morning and check it out. Mine is not as severe but it jams up often on a single stack for aap01. Such a pain.
For the price.. there should be no problems whatsoever
may you make a video on where to lube up your hi capa after using it with HPA?
Will do 🫡
@old man strength I don’t have a Tapp Adapter but I’m pretty sure if you make the hole on both parts it’ll work. Part 1 the mag section where the M4 goes and part 2 the hole on the small piece that goes on the Hi-Capa mag
@old man strength the dremel would work better
I ha e a different HPA Mag Adapter but im having the same kind of issue. The bbs go to the top of the mag and shoot fine for like 15 shots and then the bbs fail to load to the top of the mag and i have to flip the mag upside down and tap it to get it to shoot another 15 shots. Will this fix it? Im also having feeding issues with the mag.
I’m having this issue now have u got it resolved?
@@lorenzomendoza5004 I have the same problem with .40 gram BBs with PTS magazine, has anyone solved it?
This helped me so much thank you
Thank you this helped me so much when mine wouldn’t feed
You’re welcome!
Can I ask did you grind the wrong piece ? I’m seeing the mag base being the only point to be grinded ?? Bottom of the hole needs a bit of bottoming out ? Anyone see the same before I go forward?? Lol
Do you have an issue aswell with the air sealing inbetween the adapter an the magazin? Because everytime i put my AAP 01 with the adapter against my shoulder i lose a little bit of air
No, I have no problem with my seal. You should try changing your Orings
Well its not the outlet itself its the part where the magazine and the m4 Magwell are screwed together
@@CxPriinceI got that same air leak when I pry/bend very slightly
i have similar problem, it does feed a little, but after one shot BBs are stuck. Do you think this will solve the problem? it looks like a simmilar issue
Yes, it will solve your problem
Your probleme are solve ? With this solution
The amount of tinkering i had to do was ridiculous
I know. Monk could have done better
@FITNESSOVER45that’s what’s bothering me.. you pay so much for something YOU have to adjust…
Can hook me up parts
What do you mean?