And way too much money as of the TEN machines I saw in the video, some behind that weren't even freshly painted, but he ONLY used four of them, so why have TEN, if that size (which only fits into the joint sealer) is all he needs to work up.?
@@ViktorMegenskiy То, что делал я из жести - законодатели в нашем деле - датчане, амеры, голландцы цокали языками и удивлялись, что без станков можно сделать...Чудо это ты, а я в этой профессии всю жизнь и зрю не на внешку, а в корень...
No, he was just "showing off" what he does on a daily, with any of the TEN machines there, of which he did only use FOUR.!! To make what? A simple 90 degree (easy-bend) pipe section. BUT LOOK, at all the wasted "sheets" he cut wrong and thus tossed aside at the bender, which he didn't explain (he'd cut wrong so couldn't use?) Plus behind the roll-former, he had SEVERAL "rolled pipes down there, tossed aside too - (unused wastage). Nah, he'd shagged around for a LONG LONG TIME, "perfecting" his speed at making ONE simple bend. And look, in his HASTE, the bend sprung back to be LESS than a 90 degree bend (possibly only 85 degrees at best, an unacceptable mistake, from specialised machinery he'd obviously been proud to make himself, for the task.)
Всё элементарно просто. Много сотен пар рук и умов работали над созданием машин, чтобы облегчить труд нескольких десятков человек. Один человек собрал несколько машин вместе и за пару минут показал, как сложный многоступенчатый производственный процесс упростить и довести его до совершенства. И к тому же без применения электричества. Green manufacturing. Супер элегантно ! Браво !
IDK, "home built" is kind of meaningless if you have a fab and machine shop at home. I see a lot of stuff that was made by machinists, like the roller die he used to corrugate the tube.
@@somethingelse4424 i mean that is true. i have a mill a lathe a drill press seven metal saws and a couple dozen wood saws, and a bunch of other tools in storage lol. me homebrewing something is definitely NOT the same as most folks, so i get that point for sure. and your eye is absolutely accurate, alot of that stuff is machined.
Total respect! This man knows his equipment and the process needed to produce a quality product. Now if he can get some employees and a contract for a good amount he could streamline his production and become a big company.
Mmmmhhh.... Naahhh ! Not in Argentina... The moment you hire someone, you put yourself in the radar of the attorneys, sindicates, police selling protection, municipal government... That could work in a few non catholic countries...
There’s something really meditative and pure about skilled manual labour. Honest day’s work.
You got it... ❤❤❤
😎
Geniale ❤️👍👍👍👍👍👍
❤🎉жестянщик,
Я тоже..🎉
Agreed
Nagyon ügyes, szép munkavégzés, kiváló kiváló befejezés 👍 sok ilyen dolgozóra van szükség a világban. Becsüljük meg munkájukat, nagyon fontos.
Excellent
What simple mechanisam with great skill
7
@@wellingtondossantos9195Nice❤
Simple? Hehehehe
Parece simple pero no hay que practicar muchoooo
@@zzzzxxxx341 yes simple what part of simple was too complicated for you?
Молодец гап йук приятно посмотреть дай Аллах тебе здоровья
مبدع هذا العامل ٠٠ يعمل
بمفرده ليقدم للآخرين ما
يحتاجونه ٠ بارك الله فيك
🇮🇶
Waww ya me vi haciendo mi codo corrugado.
Pero primero me compro un chingo de maquinas.
Мастер!Столько станков необходимо купить,помещение сделать,стать мастером,чтобы сделать деталь!!!Браво!
Это самодельное оборудование. Так что, достаточно иметь мозги и руки.
This is how it was made 100 years ago
This is how it was made 100 years ago
Чтобы сделать гофру, которая либо сразу потечёт, либо через минут 5)
@@unforgivenp это дымоходная труба
Wow. So accomplished and so smooth. Respect!
OMG... the blue machine group is in town...😮
😂😂❤
Теперь мы идем к вам!
Где купит токие опараты
Even the chain sprayed blue 😂
Класная работа ! Молодчина !
luar biasa... kreatif dan inspiratif ❤👍🏽👤🇮🇩🌏🌐
Somebody likes Blue paint 😂 nice homebuilt equipment.
👍
Not homebuilt
Toda cor é bonita quando nova.
🥰🤑
Blue paint was on special
Eres un genio parcero juro que tus herramientas son artesanales construifadpor ti mismo 👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼
عمل جديد جداً تحية من العراق ❤
Уста гап йўқ омадизни берсин санатизга қойилман деганлар босамиз.
Wow amazing so quick . Legend
It's sped up.
not bad for homemade tools. i love the hunk of rebar used as a spindle shaft
Totalmente ecológico, lo mejor de todo el proceso, felicitaciones, saludos y bendiciones desde TORREON COAH MEXICO.
THAT is why everything is blue! Thanks for pointing it out!
This shows how things are easy when you have the right set of machinery.
It seems to me that he created these tools.
I used a metal door as a brake.
And way too much money as of the TEN machines I saw in the video, some behind that weren't even freshly painted, but he ONLY used four of them, so why have TEN, if that size (which only fits into the joint sealer) is all he needs to work up.?
@@QUIX4U Not mention how it will cost, when 90% of machines are idle all the time.
@@QUIX4Uyou really came to that conclusion based on a single 30 second clip?
Buena 🙋🏻♂️🇨🇱..... Exelente talento y UNA MICRO EMPRESA
Muito bacana ver o excelente trabalho de um profissional. Parabéns!!!
Excelentísimo trabajo 👏👏👏
Saludos desde Argentina 🇦🇷
Very humble person. Not a show-off attitude at all.
All the best to him! 👍👍👍
I'm a fabricator welder. Some of his methods on his machine design come from necessity. I'm very impressed
Yes, and some of the machines come from Invention. I think they are related.
@@kmiller5808 Oh, Mother !
Maszyny na szybko i byle jak pomalowane, a przy okazji ściany, posadzka jak leci tylko na potrzeby yt
Awesome, it's great to see lesser, well-off countries showing rich countries how it's done in the real world
Felicitaciones esos equipos más un buen trabajo logran un gran resultado !!
Wow! That's brilliant!!! 👏👏👏👏👏👏
Một người thợ toàn diện , rất tuyệt vời với những sản phẩm do chính tay mình làm ra
Fino a che le ha le mani
Anh làm hay quá.😮
صانع ماهر ، انسان موهوب ، بادوات بسيطه ينتج قطع متقنة الصنع.
بالتوفيق
MAQUINÁRIO FORA DE PADRÃO DE SEGURANÇA OBSOLLETO KKK
Como tu comentario !!!!!!😂
@@airtonmarquesiferreira9511only dumb people put their hands inside a machine
Оказывается, всё так "просто",
- завораживает!
Ага, но диаметр стал заужен на пару-тройку сантиметров...Ничего?
Хоть одно криворукое диванное чудо всегда найдется, что бы обгадить!
@@ViktorMegenskiy То, что делал я из жести - законодатели в нашем деле - датчане, амеры, голландцы цокали языками и удивлялись, что без станков можно сделать...Чудо это ты, а я в этой профессии всю жизнь и зрю не на внешку, а в корень...
@@alexpalgov1340это показательное видео тупое ты создание 😂 а не мат часть по точной сборке.
Now that's really cool! Very Nice (And Expensive!) Equipment 👍🇨🇦😉
I love these kinds of people and videos. Well done 👍
Wonderfully engineered equipment, terrifically skilled operator!👍👍👍👍
Точно, про оборудование. Как все точно спроектировано! И сколько же рук сразу высвободилось. 🤑
Nice paint job!👍🏻
amazing
Out of all the amazing things he's doing with those self-made machines UC paint job
The overspray on the brake in the first shot says they're freshly painted... They do look good, nonetheless.
Класс!!!Чистый труд. Браво!
Молодец!!! Отличная работа.
I gave him a like for his hard work and showing us how it's made
😊😊
I don't think that's his original video
No, he was just "showing off" what he does on a daily, with any of the TEN machines there, of which he did only use FOUR.!! To make what? A simple 90 degree (easy-bend) pipe section.
BUT LOOK, at all the wasted "sheets" he cut wrong and thus tossed aside at the bender, which he didn't explain (he'd cut wrong so couldn't use?)
Plus behind the roll-former, he had SEVERAL "rolled pipes down there, tossed aside too - (unused wastage).
Nah, he'd shagged around for a LONG LONG TIME, "perfecting" his speed at making ONE simple bend.
And look, in his HASTE, the bend sprung back to be LESS than a 90 degree bend (possibly only 85 degrees at best, an unacceptable mistake, from specialised machinery he'd obviously been proud to make himself, for the task.)
Всё элементарно просто. Много сотен пар рук и умов работали над созданием машин, чтобы облегчить труд нескольких десятков человек. Один человек собрал несколько машин вместе и за пару минут показал, как сложный многоступенчатый производственный процесс упростить и довести его до совершенства. И к тому же без применения электричества. Green manufacturing. Супер элегантно ! Браво !
The third machine pressing the seam used electricity!
And the last one
,,...без електричества....' повнимательней смотри видео'
Не везде онл
😊😊😊😊😊😊
You did a great job in just 30 sec. 🎉
Edition moovie. But it was fast, anyway
Management want's this done in 15 seconds.
Um belo trabalho! Abraço do Brazil
That's what my girlfriend says
Ха Бу Бизни Узбекларку Яшавор Отанга Рахмат Ана Хунарни Зури Кани Узбек Халким Айан
Шу Каментга Лайкни Айамнглар 💪💪💪
درود به شما .. سپاسگزارم که از ورق فلزی بسیار باکیفیت استفاده میکنید
All from home built equipment man thats brilliant. Way to be awesome dude thanks for sharing.
Not one part of that setup is homemade
@@jimsmith9056 so that cutter they clearly built out of scaffolding is a commercial item is it?
@@joshschneider9766 What "cutter" are you talking about?
IDK, "home built" is kind of meaningless if you have a fab and machine shop at home. I see a lot of stuff that was made by machinists, like the roller die he used to corrugate the tube.
@@somethingelse4424 i mean that is true. i have a mill a lathe a drill press seven metal saws and a couple dozen wood saws, and a bunch of other tools in storage lol. me homebrewing something is definitely NOT the same as most folks, so i get that point for sure. and your eye is absolutely accurate, alot of that stuff is machined.
الشيء المذهل كله هو الخطوة الثانية و الأخيرة.. سهل بسيطة لكنها تحتاج إلى فكرة مبدع
nice picture boss 🤔🥰👍
Nice process using simple machinery. Great!
All equipment works better when it's blue. That was so satisfying.
Awesome!🔥🔥🔥 Keep up the great work!
Excelente trabajo..
الصينين مبدعين إشتغلت معاهم بنفس المجال و إستفدت منهم كتير 🇸🇩 🇨🇳
He is from Uzbekistan
He is from Uzbekistan
Молодец , не важно откуда ,сам жестянщик ,творча робота .
@@hamdaminomov7873😢😊
The Greeks are creative people. I've never worked with them in any field.
Дело мастера боится. А мастер дела не боится.
I particularly enjoyed the paint overspray on the drive chain.
That said though, good work 👍👌
There's paint overspray everywhere, what made the overspray on the chain so much more enjoyable for you?
10 out of 10
For keeping your fingers and painting the equipment just before the video
Thanks for playing
👍😎
Два солдата из стройбата заменяют экскаватор!😂😂😂
مهندس عاشت ايدك يابطل
From Brazil, Parabéns.
Métodos e processos.
Pode ser melhorado o Layout e conceitos de ergonomia.
No Brazil chamamos, Fundo de Quintal.
+1x, Parabéns.
Excelente trabajo!! Saludos desde México !
......DESDE CHILE
👍 An excellent and amazing video. Nice instruments.
Total respect! This man knows his equipment and the process needed to produce a quality product. Now if he can get some employees and a contract for a good amount he could streamline his production and become a big company.
Mmmmhhh.... Naahhh ! Not in Argentina... The moment you hire someone, you put yourself in the radar of the attorneys, sindicates, police selling protection, municipal government... That could work in a few non catholic countries...
Interesting comment. How does Catholicism relate? And what's a sin-dicate?
You look after your machines well 😊
Exelente gracias felicitaciones desde Colombia ❤❤❤
Most people would not have a clue how to achieve simple fabrication.
ما شاء الله يعني روعة الحرفة الله يبارك ❤❤
Азаматсың иним алга ишиң илгери болсун оомийин
,الإبداع والحرفة والفن وحب العمل يساوي الانتاج إني أحب هاده للأمة التي تعمل بالجد❤❤❤❤❤❤❤
Very well done. I am impressed. Work hard as unto God and you will be blessed.
Exelente amigo
Thank you! Very interesting 🤔
There is NOTHING like having the right tools for the job.
Бегзоджон олга омадизни берсин илохим👍
Nice job. I like your homemade sheet metal vise
😮amazing skill. Nice equipment
आई
।
😊 जेएमएम❤
Amigo ya tienes un suscriptor mas. excelente trabajo amigo bendiciones saludos desde Cúcuta Colombia 🇨🇴🚴☺️👍
Great work, my friend.
Здорово получается. Молодец! Это для нестандартных заказов отлично. Для массового производства однозначно не пойдёт.
Аллох бундай зиёда килсин...барокаллох❤
Good work with simple mechanical tools
Really great idea brother good job take care
Your great 💯 work super skill 💯
Маладец умницей Дай АЛЛАХ вам здоровья и долгих жизнь хлеб ❤
Молодцы🎉оборудование по большому счёту, сделано самими
Все оборудование грамотное, аккуратно покрашено. Работать одно удовольствие. Гофра делается быстро, но служит не так долго, как сборная фасонина.
Почему у тебя такое мнение
I love all the massive fresh blue paint over spray on the equipment. Bro spent more time making that elbow than painting the entire factory floor. 😆😝😂
what a simple template but it is not easy without Right setup.
Класс 👍👍👍
Woooow sulerb work❤️💐🙏. Our work is our God ❤️🙏.
Good job wanderfully engineer ❤❤❤
Excellent work!👍🏻🎅👍🏻🇺🇸
Good boy
آفرین❤❤❤
Уважаю, когда из "ничего" делают что-то.
Nice breaks. Aversion should make $$$ renting time for DIY types. It would be fun
И зачем роботизация ?! Как все прекрасно делает вот вам и робот и поточная линия и экономический эффект !
Причём заметьте, без всякого электричества!
@@ВасилийБакланов-ь9ы ... всё исключительно силой мысли ;))))
Super .. .. 🎉🎉🎉🎉🎉 ..
ดีเยี่ยม
Lucru bine făcut cu scule artizanale ,respect ❤
Muy buen trabajo y qué té vaya bien.saludos desde argentina
Super
Great to see craftsmen do their work flawlessly like this.
Хорошее оборудование, хорошая работа !
Bravo felicidades súper
Hello Sir your small business future is very best with successful. 👌👍
Салам всем добрым людям.Рад видеть рабочие руки.