Tap to unmute
I Scientifically Created The PERFECT Defense Beyblade
Embed
- Published on Feb 16, 2026
- Thank you JLC3DP for sponsoring the video! 3D Printing Starts at $0.3:
jlc3dp.com/?fr...
Perfect Defense Type Files
drive.google.c...
Ball Bearing Amazon Link
amzn.to/4rSnhFr
Check out Spookie's Instagram!
www.instagram....
Welcome to the LeftBurst RUclips Channel!
If you enjoyed this video please make sure to leave a like and maybe even subscribe!
Check out Jake's channel!
/ @dragonbladerleft
Check out our editor's channel!
/ @pr3stig3july
VIDEO DISCLAIMER: This content is intended for enthusiasts 13+.
Business Inquiries: leftburstsponsor@gmail.com
#Beyblade
#beybladeburstanime #jlc3dp
I need a Beyblade league that's just engineers, physicists, and crazy people making insane homebrew tech to one up each other.
I'm pretty sure that robot wars is what you're looking for
Battle bots
It would be a cool idea for sure, but it would be damn near impossible to regulate. You would just have to choose arbitrary restrictions like X amount of weight or X amount of size, only x materials, etc etc. And at that point it just means you would be just a slightly more advanced version of standard beyblade tournaments.
@NovusIgnis sounds like it would be the f1 of beyblade
Battle bots but beyblade would go hard
21:06 "never used the nuke on this launcher before." Sounds CRAZY out of context.
A few of the likes are probably from the FBI and NSA who came to review it but were like "That's actually wicked sick!*
Add a bearing between the high friction tip and the core. It will resist lateral movement without killing it's spin endurance.
I had this exact same idea. I'm imagining a ballpoint pen sort of design? The casing of the ball could be really low friction to maximize life-after-death.
Yeah, I was going to suggest splitting the tip in some way so that the rest of the top can spin independently of the higher friction TPU part.
Like a rubber orbit
alternatively you could make the tip so pointy it bind into the surface it is spinning on.
@mandrac2 It just starts digging to the center of the earth
12:13 instead of making the outer ring lighter, you shouldve just made it so the outer ring touches the launcher when attached.
That's what I would have suggested. All that's needed is for the outer and inner rings to be somehow locked together during launch.
He had to upload the video before the deadline so it was not possible (i hope this explanation helps❤❤)
@dragonamaranthine3942 I would have had the outer ring come under or over (probably over) the inner ring and have its own set of holes that the launcher goes through along with the inner ring. That way the launcher spins both rings at the same time and at the same speed. Only downside I can think of is it might make it harder to launch.
@Naxvarus
Wrong approach.
If the outer ring would touch the launcher, most of the kinetic energy would be stored in the outer ring, causing the Beyblade to lose rotational speed upon impact.
However, if the center, or core, were made of heavy metal and the outer ring of something light like plastic or even rubber, it would retain its stability and be able to withstand external impacts.
@MavenFernandes-w8nNo, even without the deadline, his suggestion on how to fix the problem is still not that good. Changing the design is definitely a better solution
Use thick oil or grease on the bearings to fix the launch issues it will increase the speed of the outside ring without losing the gimmick
Yes I was thinking using wd40 or another oil based spray to lubricate the barings
@jaredtaaffe6750 wd40 would make the launch worse as it needed more friction
I would try graphite powder.
or be crazy and engineer a locking mechanism that locks the 2 parts together then with a timer or a mechanism unlocks the free spin mid battle
@mmbeybladeworld6277 i mean in theory all you need is a weak ratchet between the ring and the body, so the body can spin the ring but not the other way around
"I made an overpowered beyblade"
"Is it very heavy?"
I was getting so hard watching this
YOU GUYS DON’T KNOW WHAT THE ACTUALLY BEST DEFENSE BEY BLADE IS: A TUNGSTEN CUBEEEEEEE
lol😂
But do it speen?
i mean as a serious thought... tungsten ring could work IF you adjust the launcher a bit... not with speed but friction, add some rubber piece to help spin up the outer ring with the core together...
I got the reference dude... AND IM HERE FOR ITTTT
“Hey have you seen my tungsten cube anywhere?”
The main reason attack types are so good is because of how the stadium is different, X-Celeration Rail now pretty much forces interaction which immediately puts attack types at advantage.
You need a mechanism to lock the free spinning armor in place while in the launcher. Like a spring loaded thingy that only releases the free spinning part when it’s spinning fast enough to stretch the spring
Like the reboot gimmick
I think similar mechanism were in jet wyvern, but didn't work well at all
Or that the free spin is only blocked when it's in the launcher, perhaps with some teeth that stop the ring from coming out by means of a mechanism that is activated when it is put in the launcher
I reckon the ring could just have a surface that also meshes with the launcher. The core would still mesh like normally but the ring could have a few inward facing prongs that connect with the launcher just about the core itself.
something with springs and a centripetal force release
Now you gotta throw all 3 of your engineered beyblade types into an arena together.
I'm gonna boost this comment so Left Burst is more likely to see it.
We need to get this guy to the top!!
That is what I am wanting
I'm not really into beyblade but had the exact same thought lol
this guy doesn't know physics if both are spinning in the same direction, one with the bearing speed will be reduced as it gets hit , " scientific beyblade " 😂 it will be done spinning before the opponent 😂😂
Pov watching noah slowly turn into a scientist beyblade youtuber (i dont have anything against them btw i actaully love them)
Same, I love his vids
A scientist/engineer
Dang you got beat by a copybot
@Kitpcswym?
@statismtistics_sturredthere is a bot comment that has like 130 likes that is a copy of your word for word
0:48 One of the milder things to come out of engineers being a bit bored. (See, the Project Orion propulsion system development from the Cold War)
1. What happened to the tank
2. I think making this bey left spinning is genius because it fixes the stamina problem and makes it have even better shock absorption
Yeah, but with the free spinning wheel cant really steal a little spin
I dont think you know how spin stealing works it absorbs hits and uses those hits to continue its spin but if a bey dispersed the hits into a free spinning wheel it wouldn't do much for it
@thestrangestAg3ndAfor a second I thought you were talking to me, then I reread it and you agreed. xD
@thestrangestAg3ndAhold on now, it could instead of steal spin, it could slow down less significantly because the enemy bay is helping it, match speeds from the outer and inter rotational forces at a higher speed
Not steal but atleast reduce opponents spin
2:38 all you need is ryuga's L drago
Ryuga's L Drago SUPREMACY 🗿🐉
Holy production value
I don't know why but when I saw the thumbnail for this video reading "this beyond is immovable first thing I thought was how do you spin it or pick it up off the ground if it's immovable hahaha
67 likes
12:37 I also enginered something like this but it lost all the launch momentum, so next time I added the bearings between the tip and base and it worked perfectly.
Random physics student and former beyblade enthusiast here. Something I thought would be included in the design is metal on the chip or near the centre of the beyblade to increase centralised weight distribution which reduces the chances the bey from being KO’ed into the pocket or extreme zone at the cost of stamina which would’ve increased the beyblades defense (basically the counterpart to outward weight distribution which increases stamina and rotational inertia which was a design feature in the scientifically perfect stamina type video) This is especially important for X beyblades because it’s not easy to stop yourself from being knocked into a pocket if the attack type just hits really hard without getting deflected. Though it also causes the beyblade to stay in the pocket instead of bouncing out if it lands in one :p
The zeal driver from burst series is also pretty good to take inspiration from, a free spinning ring for life after death on the bit can help slightly mitigate the stamina issues of a fully defensive beyblade while still retaining the friction from the rubber tip. Something like free spinning elevate bit with a rubber ball tip might work well
Yo thanks for commenting!
Totally agree at 5:58 we recommended printing the core of the Beyblade in some heavier material. If you'd be interested I'd love to hear some of your feedback on some future projects before we print them. Message me on discord! @leftburst
@LeftBurst 2 MINUTES AGO
@LeftBurst try running your ultimate defense type on 9 60 that should help a lot with burst resistance also
I suggest you make a rubber hexa for this you know how good hexa is at defense so maybe rubber might elevate it a bit
If not try running more stamina focused bits on it that still keep defense too
Like wedge or hexa or even free ball. Free ball is especially good cuz it has a free spin gimmick which means it can absorb a lot of energy from low height attackers this could definitely complement the free spin ring
Right? it's why the lucifer chip from burst was so cool.
Reminds me of metal face bolts
21:57
That was the Hajime no Ippo Uppercut of beyblade counters. Just absolutely pounded to shit, one last lucky opening, and just MAXIMUM EFFORT as the Nuke gets parried into oblivion and our boy flops over, completely incapable of fighting.
Highly doubt you see this comment but, just a suggestion, in stead of getting a lighter metal I'd say slightly redesign the plastic part with a tiny square rubber the same length as the ball. One tiny rubber square on both sides so that the friction would make the outer ring spin with it but still be able to tank hard hits. If you do see this, thank you for raising me I've been watching your videos since I was 8.
this guy doesn't know physics if both are spinning in the same direction, one with the bearing speed will be reduced as it gets hit , " scientific beyblade " 😂 it will be done spinning before the opponent 😂😂
@nandutricksterking3696 You'd be right if, instead of clashing, the Beyblade tops just interlocked like ideal gears and transferred energy from faster to slower when making contact, but I don't think that's good way to model these impact interactions because it's not what we see happening. Instead, we see and hear a lot of clashing, which means that energy is doing something else.
I should clarify that I am not a physicist or engineer and indeed was not at all familiar with Beyblade until watching this video, but I think this is all super cool so here's my understanding of what is happening: long story short, the actual effect of impact here appears to be to impart lateral movement to both tops, not efficiently transfer energy from one top to the other. As with any spinning top, trying to push one over results instead in 'spin energy' being lost as it rights itself, which means that *impact always robs energy from both tops.*
As such, a free-spinning ring means that there's something lighter and freer-spinning to 'use-up' any spin-powered impact energy instead of transferring it to the top. The ring will spin, instead of the top being forced to move in ways it wasn't already moving (and thus being 'pushed'. Again, in the interlocking-gears model, this _would_ as you say be a bad thing, because that model treats the incoming energy as helpful. But, when the impact energy is a destabilising force, *stealing energy from that impact is always beneficial.*
Due to my chronic illness limiting my ability to explain these effects in full, I will leave the exploration of why the ring is more beneficial for the 'defense-type' than it would be for the 'attack-type' as an exercise for the reader.
P.S. My guess, and, again, I _do not know Beyblade yet,_ is that 'stamina-type' beyblades are designed to exploit the energy of the other top in the system in exactly the way you describe. They _will_ want to rob energy from the other beyblade, rather than simply redirecting the energy of impact as the 'defense-type' in this video does, so they would be disadvantaged by a free-spinning ring. But that's just a guess on my part.
P.P.S. Due to the aforementioned illness, my own stamina crashed hard in the middle of writing the (very) long version of this comment, so my apologies if my description of the effect of impact is unclear. Thank you for reading my comment.
16:42 the difference here is probably negligible when you consider the order you launched them.
And, considering the gap with which those two were launched, the defense one has more spin time, if they were simultaneously, the defense might have lasted longer 😅
Perhaps a bit simmilar to Coat Sharp could help with stamina, and making the free-spinning ring a perfect circle would reduce the recoil from enemy attacks even further.
The thing with the free spinning ring is that it still has friction from the ball bearings leading to more energy spent on spinning the ring. But heres an idea what if you had something that would make it harder to push the bey and have it more spin steal instead of just using entirely a free spinning ring. Because you see when you have the inner portion spinning and the ball bearings spinning it basically equals out that centrifugal energy. So whilst you could try to make sure the spheres are more smooth and contactless it could still wear more so if you had the outer ring more seperated still but had something that still allows spin but is more springy then that could possibly reduce the beys backwards momentum because it takes more energy to push the center of the bey. But the ring may be too heavy. So heres a better idea put contact points thats pretty much outside the ring that acts like a spring basically it could push the bey but it reduces it in different seperate contact points but its still attached to the ring. because if you think about it spinning tops dont have much contact to the ground so they would be pushing something thats also off the ground with a spring that increases resistance if trying to push harder. So it acts like a cushion.
3:15 steel ball run reference?
you see the sbr trailer bro 🕺
jojo fans eating good next year
.....is anyone gonna talk about Miku and Teto being in the vid?
Timestamp?
@damanuel_official 1:31
This could be the one time you would ever bring back the suction cup driver
making the outer ring lighter or adding spokes/protrusions that catch on the launcher hooks would probably be quite beneficial.
you could actually make a system that has little teeth that allows the blade to spin left but not right because you lauch the bey right spin but when another bey hits gargoyle the force makes it turn left.
I'm not going to lie for New Year's video you should make all the Beyblades you created go against each other with a whole bunch of different matchups
7:54 That looks like... really high friction. It's literally coming to a stop in less than a second.
He didn't lubricate the bearings so that's expected, unfortunately.
Yeah i was confused at why he was so hyped because it immediately stopped 💀
Cause its not lubricated. If non lubricated bearings can disrupt the spin this much then imagine how much a low friction outer ring would do.
@slendydie1267also it's light, it's harder to stop a heavy object moving fast right ? But Ig it could make the whole thing spin even less
19:14 so its like clock mirage that has perfect stamina, but can burst really easily. And this Gargoyle Steel/Bearing has perfect def, but no stamina
Hmm
15:27 it looks so cool how freespining ring stops after beyblade already stopped
10:58 inertia....
Yes
Yes
Yes
Yes
Yes
11:15 the engineering process is fun because a group working together has blind spots.
Also, I think the outer ring might make the stamina issue worse. That's your flywheel, so i think disconnecting it from the main body might disproportionately sap the gyroscopic effect
You could even make it dual/left spin to give it more resistance to attacks from opposite spinning beyblades
The best way to fix it is making the outside light but it also makes its defense greater because it will then spin more and effect the blade less
outside ring can share the launch latch with the inside one, so they can start spinning at the same speed
"SPINNING HERE, I REALIZE!"
Definitely think you should do a part 2 video for this
13:37 left burst i need this i want that super launcher where can i buy
You have to make it
3d print it
at small spring areas on the layer to deflect direct attacks
I have an idea inspired by this where you make the contact points of the blade bearings. The bearings themselves are free rolling along a rail that goes around the Beyblade. I think this will make the blade auto balance itself against hits.
this reminds me of my favorite combo from classic plastic gen beyblade, the grip defense . which was a pretty crazy combination of parts to make a bearing grip tip with the wide defense disk, using some weird parts in the core combined with wolbord2 rubber tip, making it so hard to move since it was a heavy combo but the tip wouldnt even spin, the tip would grip and only the bearings and top part would spin while the tip just firmly stayed in place and did not spin at all, only rolling slightly to return to center after getting hit, similar to a zombie combo but in defense type it was so fun to use
attack types being bad in previous generations is such a wide spread misconception between newgens, attack types used to take skill to master
Skill?
Brother it's a top, what strategy is there to do?
@000Krimyep as in launching techniques, if you launch a beyblade straight it’ll go around in circles but if you launch it angled it’ll follow a different path that resembles a flower
@JesseBailey-d6pI know this is rage bait so I may or may not ignore it
@_Abdulziz506 I'm being serious I played beyblade from the start to burst there was no strategy in the early days what are you talking about?
Reminds me of that gearless joe episode where they tey to rob q pawnship
takara tomy needs to be taking notes rn
6:34 THANK YOU
67
@cavemandotpnj6876holy brainrot
@cavemandotpnj6876 GET OUTTTTT
67
67
0:16 cooked
cooked
i would love to see a ball barring assist blade for a knight cx line
Not gonna lie but gargoyle make so much sense for its avatar because one it is a stone statue and two it's gonna be cool when the avatar get animated in Beyblade X anime
LeftBurst just makes these for fun, they won't be in anything official.
Have you heard about imagination if you haven't than yeah if you heard it than imagine don't think of it as official and think of it as real
@muhammadaimanleongmuhammad9908 are you a little kid? If not, this comment makes you look really dumb. Just thought you should know
So what I still think it's pretty cool if you think it's not than you're just a bully
@muhammadaimanleongmuhammad9908lol bro got ragebaited
if you add something the launcher can grab on to on the outer wheel, you could spin it to speed there too
Add support prongs to the outer layer, that acts like the inner part.
Basically it will be grabbed by the launcher prongs and will be spinned at the same speed.
I used to love these things when I was younger. They are still fun to this day.
A series where you create beyblade from scratch that use the plastic gen gimmicks in a modern format, Trygles jump, a trypio sized top. Ball bearing defender like draciel, what if any OG gimmicks do you think have a place in modern beyblade.
So when you say plastic gen is that the first bayblades
@learnasienes2983Gen 1
@learnasienes2983yes anything pre hms. Basicaly just stuff from the first anime seasons
21:00 when an immovable object meets an unstoppable force
I'm no engineer, but a couple changes I personally would've made is to make the inner core mostly metal to decrease outward weight distribution, as well as replace the steel bearings with a higher-friction alternative in order to transfer more momentum into the free-spinning ring (at the cost of not deflecting quite as well, of course).
I thought owd increases stamina why would u wanna lose extra stamina jus curious
i wonder if a centrifugal clutch type mechanism could fix the premature outer ring disengagement on launch problem
7:59 no powder lubricant?
Ive got my dynamics exam in an hour, but this is just too good
21:16 tactical, nuke incoming
beyblades are PEAK. so much enjoyment to be had and yet they are severely underrated
No clue why this was in my recommended but I’m here.
ahhh beyblades where my childhood, i rmb the introduction to tpu tips for stamina types when i was like 7
Thank you for putting 6, number after 6
Yes
you should make one with tungsten ring
Bro is turning into a Mad Scientist 😂😂😂😂😂
this guy doesn't know physics if both are spinning in the same direction, one with the bearing speed will be reduced as it gets hit , " scientific beyblade " 😂 it will be done spinning before the opponent 😂😂
It makes more sense to make the inner part heavier rather than lighten the outer ring. Or to develop a mechanism that would connect the inner part and the ring during launch but separate them upon landing.
0:00 already peak
You should use the older defense beys and see how the stand up to those burst "beys"
Bro illinuc stole your sponsor😂😂😂😂
Doesn't matter if they sponsor both. Better for them, more people will see - more people will use their services
*STOLEN*
from the beginning is was thinking how you should design it so you spin both "cores" at the same time, so there is no loss between them
You could add a small piece to the launcher that touches the outer ring to help accelerate it
I think that rubber could be added to the blade to absorb more energy.
But stanima is ganna suck, and make it into an attack type moving defense bay
@pugforlife7007 In that case, it would be more logical to make a beyblade that rotates left and right, plus in my opinion, the rubber The bit makes everything even worse, it's harder to move, but at the same time, the stamina suffers So, in my opinion, it would be easier to make a plastic bit Yes, it would be easier to move it, but it would be possible to use a bearing Bit, and Leftburst already has At the same time, yes, it would be more difficult to implement, but with some refinement, it would be possible to make a mechanism that would prevent the outer ring from rotating when it is launched, that’s all, Well, I'm ready to hear criticism, and I apologize for any grammatical errors I may have, I don't speak English very well.
@yt.tt.ropro228 What's your first language? Why does your first language not have sentences?
@westernbrumby It is possible that errors in the text arose because I translated the text through a translator, This text was also translated through a translator
Actualy suction tip is best to solve problem you mentioned
4:31 I'm sorry but WHO THE HELL buying that on a payment plan....
Something like that actually makes sense to split up in payments tho
Put a bearing in the rubber tip. Make the outside ring rubber for absorption and the core a heavy metal for inertia
Where do you get the custom images for the piece that fell off at 13:13? Do you make them yourself?
It’s garbage
idea: make tip plastic for more spin however outer to it and up a bit have rubber pads so if it gets hit they will tap the ground stopping it from moving but the plastic will still give it more stamina
Left burst you need to make a video trying to use custom beys in a tournament Ik it’s not allowed but like just try
I see the archer gargoyle influence from zero g. Underrated. Very nice
6:34 TYSM BRO, IM SERIOUS
What does TYSM stand for?
@aaronxu1513it stands for:
_Thank You So Much_
@aaronxu1513thank you so much
@ttemprest you're welcome
It's a joke.
@aaronxu15136-7
clutch pack the ring, engage it when the launcher attached, would be next level
How do you know that much about Beyblade? 11:53
He said at the start we was professional engineer didn’t he?
Its about physics not about beyblade
this is just physics 1 lol
I'm a physics student and I can confirm that I knew that as well
energy transfer
it’s so good at defending it defended the power from the launcher
You should get a slow motion camera to observe the attacks more clearly.
use a rubber claw kind of tip that is attached to a bearing
the outter ring just needs a little arm reaching over the top to access the launcher
U should make an ultimate custom bey combo
I think a cool idea would be a stabilizer like they have in skyscrapers and high rise towers that way when it get hit the stabilizer absorbs the hit and maybe add spin, also it would be cool to see the next one be the "perfect left spin" or spin sapper i like to call them.
Making this left spin would make it op since it has that inertia problem
I had been thinking of basically a trainer beyblade, one like the one you built, but it has spring panels that connect to the beyblade on one side, anything that hits it would deform the panel, and then spring back, basically creating a "counter" type Beyblade
can you make an update to video once you have the correct material/more fixes on the outer ring issue?
Maybe design a simple locking mechanism that locks the outer ring to the inner ring that releases once it's spinning?
It has been ages since I last thought about beyblades, maybe I should get back into it
I wonder if perhaps a touch more friction in the bearings might be able to counteract the spin issues, sort of remind the system that it is one spinning object rather than two, while at the same time keeping enough movement that strikes could spin it.
your vids made me wanna rewatch the original beyblade burst series
I have a interesting idea, try adding rubber on the contact points so it eats their spin alive and possibly helps a _bit_ of the force.
you could mod the launcher to have sort of a clutch pad on it to spin the outer ring at the same speed
What you needed is a dule ring bey with one protruding bearing ring, a non bearing ring that carries the inertia and a tip that it pointed but made out of tough material.
maybe you could use some kind of clutch mechanism to lock the outer ring to the core during launch but still free spin in general / on impact?
btw i realized if the ring uses the start speed then when ever you get hit it gives a bit of a boost
super slowmo fight with this byblade to show the mechanism