I’ve watched both videos, when I go to zen studio, I click Xbox 360, but even still, it doesn’t recognize a console in zen studio, it stays an empty slot. Then when I try to switch off k&m in game to controller, the option is locked and I can’t switch it. Any suggestions? Thanks
For anyone having problems with your keyboard being recognized but no outputing keys all you have to do is run your keyboard in bios mode had this same problem and tried everything until i put my keyboard in bios mode now works fine! i have a corsair k95 platinum and to put it into bios mode you unplug it and hold down the B and S keys and plug it back in if you have a different keyboard just search "(Keyboard name) bios mode" basically it makes your keyboard connect to computer without your keyboards software sayin ya this a keyboard not a controller you cronus guide on there site was very helpful with this thank you!
I switch mine from my keyboard/mouse to controller (using the usb switch) and my games just opens up the friendlist for some reason. Any idea as to what it could be ?
I have a mamba razer elite Followed all the step by step instructions And the cursor is frozen solid Only buttons work in the zen studio when i run the circle test , but the cursor is Walt dissent frozen Any tips or help ? Greatly appreciated
I have a big problem, i do the same as u in the video every settings but I don't get any response ingame. When I Switch to the zen ingame my m&k just freeze and nothing happens. Every hotkeys are set and the Cronus can see my k&m in the Studio but same with my controller they don't work ingame trought the zen when I plug my controller in the PC it work fine.
Hi thanks for the video, does that setting works with battlefield 1 too, and do you have any previous video for best keybinding for fps like battlefield 1 thanks 🙏
I have a Logitech G600 mouse and I'm having trouble getting my DPI setting to stay at 4000. With the G Hub open I switch the Switch box to the Zen and I notice it removes my keyboard and mouse from my G Hub. When using a XBOX joystick in game it moves really fast but when I'm trying to move my gun with my mouse it moves really slow and I have the same setting and all as you in game and on Zen.
i have everything set up (M/K on pc player) an all keys are bind, but....when i go into warzone my gaming m/k attached to zen doesnt do anything, like its not even turned on, do i have to disconnect my pc m/b too as i dont have a switch so using 2 sets
My stuff is working in game. When I press the switch it’s not sending signal back to my pc. Like I have no mouse when trying to navigate my desktop. But my zen works just fine will keyboard and mouse
Hey thanks for this video. I have the exact setup but for some reason COD does not swap to controller when I switch with the KVM. Zen is defiantly picking the KB & mouse up. Suggestions?
Thanks got both keyboard and mouse to connect...only problem i have us the mouse settings are real slow when i aim the gun down the sights. I can't figure out how to match the zen settings to in game controller
Hello my problem is that I Can't map right analog stick to mouse. Meaning when moving the mouse it dies not allow me to turn in 360 motion but instead emulates WASD. Any help be appreciated thank you.
I know the chances of you seeing this is slim, but I need help. I'm trying to run the Cronus zen on PC with K&B. Warzone has that option to swap locked. What am I doing wrong?
I got mnk switch from cronus site but when I connect my keyboard and mouuse and it will work for like couple of switching back and forth and after that it can only work as controller I got no more winwows mouse and key not even after I unplug from switch and directly put on pc need to complete windows restart any solutions for that
ik this been out for a yaer i just got a zen did this in mw2 but it like im fighting the aim assist like my mouse wont flik like i want it also make me turn extra when zomming in
Hey gl0zz3n, is there a way to invert y axis in zenstudio or ingame (without touching wz ingame option) because here is the problem with m&k if you use xbox emulator, you have to turn on " Invert Look setting" in warzone option. Otherwise when you look up it look down. So you can turn the option on yeah, but if you do that, you kill all the "anti recoil" scripts you will want to use since it's inverted. It's even about changing anti recoil value, the anti recoil just bug. I'm searching a solution to invert y axis in warzone or bypass this since weeks
Yes, you can do it in your mouse settings. Its in the middle section off to the right ide of the mouse settings window. Im at work so I can't put up a screenshot atm, but the option is 100% there - I also play this way
i can`t manage. idon`t use usb switch (i just order for tomorow) i use a laptop. but when i plug mouse and keyboard they doesen`t work. please help me :D .
So I wanna use mnk+zen on my laptop so when I connect my external mouse and keyboard then go to the MNK plugins to map the controls/settings, only one of my devices respond every single time while the other simply does not, please help if you can, I literally kept watching RUclips videos for legit 8 hours and couldn’t figure something out, I can also join you on a discord call if possible, thanks
so i have a bizzare question. i followed everything in your video but when i move my mouse it activates melee and weapon change. for whatever reason moving the mouse activates just those two other buttons. and still cant move well. any suggestions?
you need to make a video that shows how to set everything up from scratch because its not working on both videos that I have watched of yours its not allowing me to use mouse and keyboard. its not pulling them up spent 2 hours trying to do everthing that you have done and still not working.
You have to map your keybinds. Just double click the controller button you want to map, then press the keyboard key you want to activate the button. Also, go to the forums, I already have this posted, haha :)
@@GL0ZZ3NTechReviews yeah i got it working but my problem is my mouse i only use dpi below 2k since my mice cant go beyond 6k dpi, any recommended settings on that?
He man I have a problem I’m following all the steps but when I’m in game I can look around the mouse is frozen I can use it to look around but I can used the w a s d and all other buttons but not look around while in game? Do you have any idea why?
MW detects the controller but when I start playing it wont move. Have Logitech mouse, same as yours and razr huntsman keyboard. Emulator Output Protocol: Xbox 360... but in Remote Slot Change I only have these options (Disable/ PS+Share / PS + L3).
@@GL0ZZ3NTechReviews I did not have the m&k connected directly to the Cronus Zen. Now it works but the mouse movement is laggy and WAY to slow. (I have 10,000 dpi, report rate 1,000 and the same settings as you in WZ. I just can't make it work to normal speed.
Thx you, I got that part going, my problem is with the.settings, and key mapping. I hate controllers, it's very hard to make the game playable like mouse and keyboard
Yeah, I know what you mean. Controller users dont have as many buttons, so they layer controls over each other - like tappign the button to switch weapons and holding the button to put on your plates
Thanks for making this following my previous comment. Sorry I literally today saw this was a thing. Busy few months. Anyway, I am now able to see the Cronus detected as a Controller in Warzone. However when I click the switcher, I get no response from Warzone. No WASD, etc. Do I need to complete a setup process for mouse and keyboard first, or Activate a Profile from Cronus?
After some tweaking it appears as though my mouse is being detected for movement in game, but keyboard, despite being able to map buttons in the settings menu, is not being detected under "Device Monitor" in Zen Studio and I have no control in menus or game. Edit 1: I am noticing that in main Mouse and Keyboard Settings, I have a single Icon above the Mouse (Appears to be Logitech logo says Vid/Pid = 046D: C534) and nothing above the Keyboard. Mouse isnt Logitech though... Edit 2: Upon further testing, im seeing that the Logitech Mouse (Which I never use and only used for testing), which is paired with Keyboard (M185 Mouse and K270 Keyboard) isn't being detected by "Device Monitor", while my ONN Mouse (100012594) is being detected. Edit 3: Unplugging ONN Mouse, allows Logitech Mouse to be detected by Device Manager, but Keyboard is still inoperable, despite it allowing me to program bindings on main Settings Page. Could this all literally be hardware incompatibility at this point? Or can it be another settings issue? Is it possible a different keyboard would solve this issue? If so what keyboard and Mouse could I reasonably purchase?
Hi I got it working on cod cold war but I have to move my mouse rapidly to be able to aim normally and when I move my mouse normally as I’m not all erratic or insane my camera barely moves if at all. I just got my zen today and have been going through all you tutorials but haven’t found one addressing that issue any and all help would be greatly appreciated thank you and keep up the amazing work!
Sounds like you have your mouse settings all jacked up. IF you're playing warzone, head over to the forums and grab my latest mouse settings. They feel really good.
man i do the same connection but when i tap to Zen, keyboard dosent work...but i f i plug direct keyboard in zen.....work....why?? i wanna use my switch but i cant
So my zen won't connect to the studio and register if the programing cable isn't hooked up. If I just have the back micro USB plugged in, it doesn't detect it so I can't switch to controller in settings. Any suggestions?
yeah, you only need to connect the programming cable if you're changing something. unplug everything, first plugin the micro usb in the back, then if you need to program, plug it back in then re-do this process. it makes the zen turn off which will make it 100% work every single time
hi i am struggling to get my cronusmax zen setup 4 my xbox problem is i try to play warzone on xbox while playing with keyboard and mouse PLESE HELP ME
@@GL0ZZ3NTechReviews I do not know what is wrong or if you can help me but the mouse does what it wants when I go to play ... while I have done the buttons correctly when I go to move it the mouse reloads, throws 2.3 bullets and reloads again. the movement is ugly ... it goes where it wants. Can you help me?
Liked and sub. Thank for everything. Bro, How can I change de Keys for slide, prone or crunch (WARZONE, MODERN WARFARE) on PC? I can not do Slide Cancel during use Zen (with Mouse and Keyboard) In game When I'm trying to run and use the slide, the character can't slide or slide cancel He was crunch and then prone. The key binds doesnt match controller/keyboard and mouse)
idk what you mean - you just need to see which controller button does the in-game action you want, then map your KB key to that button in your mouse settings.
Appreciate the videos I've spent the entire day trying to get my M/KB and Zen to work with PS4. I'm obviously a M/KB user and am running into a few things driving me nuts that I can't find tune. For starters it feels like slow movements with mouse are fine but if I go to snap on a target I'm doing a full 360 insanely fast. Also keybinds for keyboard are brutal cause I can't map them how I previously used it cause there's no overlapping keys. Any insight on this?
The Zen emulates a controller and we are forced to use the keybinds the game dev's choose. - like not having a separate button for crouch and prone. Tuning is a separate beast, its more of an art than a science right now. I generally try to keep my acceleration around .97 -> .99, smoothness makes a huge difference as far as response, I've found that having it 50 -> 70% works pretty well. What game are you playing? I may have some settings posted on the forums
@@GL0ZZ3NTechReviews I actually wrote you on your other video bc im trying to find someone who really knows the m&k setttings. I have tried a few but im not having the best luck. Mostly all warzone on pc
@@GL0ZZ3NTechReviews is it a mußt have, that i use a usb Switch? I can pull Mouse and Keyboard out of the Zen and put it for doing settings into the PC and then back in the Zen? Or doesn't it work this way? Regards from germany.
I am connecting the cronus zen on the pc using keyboard and mouse. I can move smoothly and use all the mapped keys on the keyboard and mouse. the problem is when I want to use the scritp. The script does not work correctly, for example, in a war zone, 'no recol' or 'aim assist' does not work. Can someone help me?
you need to tune the values of the anti-recoil so that it actually works with your gun. I know the Warzone PRO PACK will only activate anti-recoil when you are holding the ADS button down, so if you are using a toggle-aim it does not activate. I believe an update is coming soon though. I've brought this up with the developer.
@@GL0ZZ3NTechReviews Thank you for your help !! I realized that the dead zone greatly influences the recoil of the weapon. Adjusting the dead zone correctly will make setup easier!
Love the setup, replicated the same. Setup seems rather easy, just configuration of the key bindings (can’t figure out some of the controller bindings to rebind for mine) + having a hard time moving view around with the mouse once all is setup. Very hard to look around... any help?
I followed step by step, bought the sabrent switch, watched the video on how to connect everything. and i still cant get my keyboard to work once Im in the game. (i did switch back and forth between KM on the sabrent) and still nothing. Idk what im doing wrong
What type of keyboard are you using? I know people with Corsair keyboards and a couple other brands have to switch the KB to something called "bios mode"
@@mauriciomedrano2806 Yeah, throw it into bios mode and it should work - idk what that means exactly because I don't use a corsair KB, but thats what the instruction manual says to do and other users report that it fixed it for them, haha.
@@GL0ZZ3NTechReviews so I put it on bios mode. But for some reason the sabrent just keeps throwing me back to controlling the PC only, and doesn’t let me switch it back and forth between Cronus and pc. Once I get in the game. To switch the controls between controller and kbm, the controller is locked. And only kmb is activated for usage.
good morning friend excuse the question i have both cronus zen and xim apex what do you recommend to use on ps5 with mouse and keyboard!? i started now to use mouse and keyboard with xim apex before i was playing with pad on ps4-ps5 with cronus zen .. ... they told me that xim apex on ps5 is better for mouse and keyboard what do you think?! you can have good advantages with cronus and mouse and keyboard ?!
If you want to use MnK with controller mods like anti recoil, rapidfire, etc, then Go with the Zen. If you ONLY want to use your MnK and dont want any mods, I would personally go with a Xim
@@jurbs89 Awesome! Glad they worked out for you. Everyone will have a different personal preference, but I try to supply good base settings that are easy to work with for everyone
You got a discord where you can help me figure out what I'm doing wrong? I'm sure its user error. I bought the Cronus Zen and the Hub and Switch but can't get it working.
ok, not a problem. I'll try to whip up a quick tutorial when I get home to show how to map mouse buttons. I use a logitech g502, so the extra buttons have to be assigned to press a keyboard key (I personally use the numpad buttons because i do not have one on my KB) so that the Zen is able to see them. Like, my extra buttons by my left click are mapped to NUM1 and NUM2 in the logitech software
@@GL0ZZ3NTechReviews one more question i just assigned the key bind but when i play warzone i try to ads and shoot at the same time it wont let me it will just go back to holding the gun normal way
@@GL0ZZ3NTechReviews I would love a complete kbm with cronus zen on console setup video, i think the vid will do well too. I would also love to see how to find the best keybinds/sens for it... i tried it today and everything was off, i just gave up.
@@shadowguardian321 Google how to put your Keyboard in Bios mode. Only issue with this is you can't alt tab as it will generate window command. Also use a switch board.
@@shadowguardian321 mine is a corsair, this is how it works, Hold, Esc+F1+window key next to ctrl plus the lock pad key on your keyboard all at once for 5 second then the light will start flashing and you are in Bios mode. One way to know if you have or need Bios mode is to test your keyboard on a console if it works then you don't need Bios mode if it doesn't then give me you keyboard model number. Happy to help.
the only way it fixes this issue is don't plug in the short cable into USB 3.0. As soon as I plugged it into my USB2.0 it worked and allowed me to swap to Controller and worked in game. My issue now is my Keyboard doesn't work. Hope that helps someone
Pls help...mouse working (502 hero ) i can shoot , all good , but i have asus keyboard , key map it’s ok, all buttons command , but keyboard not work.... It does not respond to any buttons , i tried device monitor keyboard...i press the buttons on keyboard but nothing...thanks
i mean.... it works for everyone else. if you want to act like a little bitch baby about it, i wont bother giving you any support, but if you want to come on my channel like a sophisticated member of society and ask politely, I have no problem explaining things and helping you troubleshoot.... you know... because tens of thousands of people are already using this device with no issues....
Yea, when you use the Auth controller, the cronus tricks the console into thinking its just a regular controller because device ID is cloned from your regular controller. Lol
@@GL0ZZ3NTechReviews No way you just said that when you play Mouse and keyboard on console video games. Come and try to cheat your way out of Special Forces training.
pretty amazing - you don't reply to me then you erase my comments ? Do you feel threatened by an old man ? I am also a veteran . So what's your problem ?
I tried my brother's and it seems pointless, there's so much mnk lag and it feels terrible to use as apposed to the games actual mnk support. Most modern warfare players use controller anyway so they can abuse aim assist. A bit of a novelty item imo.
@@sasharettren9174 That's because he doesn't have his MnK settings tuned properly. Its going to feel laggy and like crap if your deadzone is set too low (your fine hand movements will be ignored because they fall within the deadzone you specified) I have CoD feeling like PC bro
because people who don't have problems have no reason to say anything because shit works. idk what to tell you. I can get on the camera and do it every single time. Following instructions isn't that difficult
This one came out way better, clearer, and straight to the point.
I’ve watched both videos, when I go to zen studio, I click Xbox 360, but even still, it doesn’t recognize a console in zen studio, it stays an empty slot. Then when I try to switch off k&m in game to controller, the option is locked and I can’t switch it. Any suggestions? Thanks
For anyone having problems with your keyboard being recognized but no outputing keys all you have to do is run your keyboard in bios mode had this same problem and tried everything until i put my keyboard in bios mode now works fine!
i have a corsair k95 platinum and to put it into bios mode you unplug it and hold down the B and S keys and plug it back in if you have a different keyboard just search "(Keyboard name) bios mode"
basically it makes your keyboard connect to computer without your keyboards software sayin ya this a keyboard not a controller
you cronus guide on there site was very helpful with this thank you!
hey how do i go on bios mode on keyboard
I switch mine from my keyboard/mouse to controller (using the usb switch) and my games just opens up the friendlist for some reason. Any idea as to what it could be ?
Did everything you said but for some reason it still locked
I have a mamba razer elite
Followed all the step by step instructions
And the cursor is frozen solid
Only buttons work in the zen studio when i run the circle test , but the cursor is Walt dissent frozen
Any tips or help ? Greatly appreciated
I have a big problem, i do the same as u in the video every settings but I don't get any response ingame. When I Switch to the zen ingame my m&k just freeze and nothing happens.
Every hotkeys are set and the Cronus can see my k&m in the Studio but same with my controller they don't work ingame trought the zen when I plug my controller in the PC it work fine.
Hi thanks for the video, does that setting works with battlefield 1 too, and do you have any previous video for best keybinding for fps like battlefield 1 thanks 🙏
How do I set up the switch so it works how you did it
I have a Logitech G600 mouse and I'm having trouble getting my DPI setting to stay at 4000.
With the G Hub open I switch the Switch box to the Zen and I notice it removes my keyboard and mouse from my G Hub.
When using a XBOX joystick in game it moves really fast but when I'm trying to move my gun with my mouse it moves really slow and I have the same setting and all as you in game and on Zen.
i have everything set up (M/K on pc player) an all keys are bind, but....when i go into warzone my gaming m/k attached to zen doesnt do anything, like its not even turned on, do i have to disconnect my pc m/b too as i dont have a switch so using 2 sets
Hey thanks for the video i manage to solve my mouse not working but i have a problem using my WASD keys on my Laptop any suggestions?
My stuff is working in game. When I press the switch it’s not sending signal back to my pc. Like I have no mouse when trying to navigate my desktop. But my zen works just fine will keyboard and mouse
How do you have it set to make your m&k work on pc plus Cronus
Hey thanks for this video. I have the exact setup but for some reason COD does not swap to controller when I switch with the KVM. Zen is defiantly picking the KB & mouse up. Suggestions?
i have a video up showing how I get it to be seen as a controller in CoD
I am trying to use 2 mice. One in the Cronus and one in the pc but when I load up warzone it just stays on the pc mouse. What might I be doing wrong¿
Thanks got both keyboard and mouse to connect...only problem i have us the mouse settings are real slow when i aim the gun down the sights. I can't figure out how to match the zen settings to in game controller
jump your ADS sens up to like 150% in-game
I try to use this on wz2 and in zen studio it recognizes KBM just fine. But when I go in game, it does not work. Any solution for this? TIA!
Hello my problem is that I Can't map right analog stick to mouse. Meaning when moving the mouse it dies not allow me to turn in 360 motion but instead emulates WASD. Any help be appreciated thank you.
I’m on pc and I’m trying to plug my mouse and keyboard in the zen but my mouse doesn’t seem to work
I know the chances of you seeing this is slim, but I need help. I'm trying to run the Cronus zen on PC with K&B. Warzone has that option to swap locked. What am I doing wrong?
hello, I have a problem with connecting the red dragon keyboard, how to activate it?
I got mnk switch from cronus site but when I connect my keyboard and mouuse and it will work for like couple of switching back and forth and after that it can only work as controller I got no more winwows mouse and key not even after I unplug from switch and directly put on pc need to complete windows restart any solutions for that
I can still use the cursor and mouse regardless... did I do something wrong? think I plugged in all good
At 3:55 you switched to zen and the keyboard worked but not the mouse, so how do play without the mouse?
my question is when u plug a cronus is and u play mouse and keyboard does the gameplay register as controller and give u aim assist ?
my keyboard wont work, when my mouse works and the other way around how do i fix that?
Mine only shows xbox 360 and for remote slot change says disable ps+share and ps+L3
When I unplugged programme cable me Cronus zen ist Licht but im tools Device ist disconnected, what i didn't wrong,
Guys Help Please
ik this been out for a yaer i just got a zen did this in mw2 but it like im fighting the aim assist like my mouse wont flik like i want it also make me turn extra when zomming in
Hey gl0zz3n, is there a way to invert y axis in zenstudio or ingame (without touching wz ingame option)
because here is the problem with m&k if you use xbox emulator, you have to turn on " Invert Look setting" in warzone option. Otherwise when you look up it look down. So you can turn the option on yeah, but if you do that, you kill all the "anti recoil" scripts you will want to use since it's inverted. It's even about changing anti recoil value, the anti recoil just bug.
I'm searching a solution to invert y axis in warzone or bypass this since weeks
Yes, you can do it in your mouse settings. Its in the middle section off to the right ide of the mouse settings window. Im at work so I can't put up a screenshot atm, but the option is 100% there - I also play this way
Omg thank you so much, please can you show me how to setup the usb switch it looks a bit complicated to me
does it go into the cronus or the back of the pc?
can you help set up M&K, I have Corsair M&K. I don't have extra M&K.
i can`t manage. idon`t use usb switch (i just order for tomorow) i use a laptop. but when i plug mouse and keyboard they doesen`t work. please help me :D .
So I wanna use mnk+zen on my laptop so when I connect my external mouse and keyboard then go to the MNK plugins to map the controls/settings, only one of my devices respond every single time while the other simply does not, please help if you can, I literally kept watching RUclips videos for legit 8 hours and couldn’t figure something out, I can also join you on a discord call if possible, thanks
I have same problem. Is it solved for you?
I haven't come across that issue. Sounds like it may be a power problem, but not 100% on that one. Very strange. What brand of MnK are you using?
so i have a bizzare question. i followed everything in your video but when i move my mouse it activates melee and weapon change. for whatever reason moving the mouse activates just those two other buttons. and still cant move well. any suggestions?
I had this two. It’s mapped twice once on keyboard once on mouse
Can you show gameplay on how it works on keyboard and mouse :)
Do I need that USB tap switch thing
you need to make a video that shows how to set everything up from scratch because its not working on both videos that I have watched of yours its not allowing me to use mouse and keyboard. its not pulling them up spent 2 hours trying to do everthing that you have done and still not working.
So u can Play on Only Controller lobbys with mouse and Keyboard ?
I need the m&k setup with the key binds. Only button that works is w
You have to map your keybinds. Just double click the controller button you want to map, then press the keyboard key you want to activate the button. Also, go to the forums, I already have this posted, haha :)
How do you connect this with an xbox series x
thank you for the additional info, will try this out later
Glad it was helpful!
@@GL0ZZ3NTechReviews yeah i got it working but my problem is my mouse i only use dpi below 2k since my mice cant go beyond 6k dpi, any recommended settings on that?
FINALLY THE VIDEO I BEEN LOOKING FOR THANK U SO MUCH!!!!
Is they’re input lag delay?
He man I have a problem I’m following all the steps but when I’m in game I can look around the mouse is frozen I can use it to look around but I can used the w a s d and all other buttons but not look around while in game? Do you have any idea why?
no, sounds really weird - do you have the mouse mapped to movement in your Zen studio settings?
MW detects the controller but when I start playing it wont move. Have Logitech mouse, same as yours and razr huntsman keyboard. Emulator Output Protocol: Xbox 360... but in Remote Slot Change I only have these options (Disable/ PS+Share / PS + L3).
really weird - are you certain the game is selected as your active window?
@@GL0ZZ3NTechReviews I did not have the m&k connected directly to the Cronus Zen. Now it works but the mouse movement is laggy and WAY to slow. (I have 10,000 dpi, report rate 1,000 and the same settings as you in WZ. I just can't make it work to normal speed.
Thx you, I got that part going, my problem is with the.settings, and key mapping. I hate controllers, it's very hard to make the game playable like mouse and keyboard
Yeah, I know what you mean. Controller users dont have as many buttons, so they layer controls over each other - like tappign the button to switch weapons and holding the button to put on your plates
@@GL0ZZ3NTechReviews so what is the solution to that how do I bind them
Thanks for making this following my previous comment. Sorry I literally today saw this was a thing. Busy few months. Anyway, I am now able to see the Cronus detected as a Controller in Warzone. However when I click the switcher, I get no response from Warzone. No WASD, etc. Do I need to complete a setup process for mouse and keyboard first, or Activate a Profile from Cronus?
After some tweaking it appears as though my mouse is being detected for movement in game, but keyboard, despite being able to map buttons in the settings menu, is not being detected under "Device Monitor" in Zen Studio and I have no control in menus or game.
Edit 1: I am noticing that in main Mouse and Keyboard Settings, I have a single Icon above the Mouse (Appears to be Logitech logo says Vid/Pid = 046D: C534) and nothing above the Keyboard. Mouse isnt Logitech though...
Edit 2: Upon further testing, im seeing that the Logitech Mouse (Which I never use and only used for testing), which is paired with Keyboard (M185 Mouse and K270 Keyboard) isn't being detected by "Device Monitor", while my ONN Mouse (100012594) is being detected.
Edit 3: Unplugging ONN Mouse, allows Logitech Mouse to be detected by Device Manager, but Keyboard is still inoperable, despite it allowing me to program bindings on main Settings Page.
Could this all literally be hardware incompatibility at this point? Or can it be another settings issue? Is it possible a different keyboard would solve this issue? If so what keyboard and Mouse could I reasonably purchase?
Hi I got it working on cod cold war but I have to move my mouse rapidly to be able to aim normally and when I move my mouse normally as I’m not all erratic or insane my camera barely moves if at all. I just got my zen today and have been going through all you tutorials but haven’t found one addressing that issue any and all help would be greatly appreciated thank you and keep up the amazing work!
Sounds like you have your mouse settings all jacked up. IF you're playing warzone, head over to the forums and grab my latest mouse settings. They feel really good.
man i do the same connection but when i tap to Zen, keyboard dosent work...but i f i plug direct keyboard in zen.....work....why?? i wanna use my switch but i cant
did you solve your problem?
Ay does anyone know how to use the headset with Cronus zen
Can anyone assist me on how to connect mouse and keyboard with the zen on ps4 ?
can someone help my mouse dont move diagnal
whats ur discord i cant figure this out man
So my zen won't connect to the studio and register if the programing cable isn't hooked up. If I just have the back micro USB plugged in, it doesn't detect it so I can't switch to controller in settings. Any suggestions?
yeah, you only need to connect the programming cable if you're changing something. unplug everything, first plugin the micro usb in the back, then if you need to program, plug it back in then re-do this process. it makes the zen turn off which will make it 100% work every single time
@@GL0ZZ3NTechReviews I’ve done what you said in this comment and I still don’t have the option in settings on warzone to switch from m&k to controller
hi i am struggling to get my cronusmax zen setup 4 my xbox problem is i try to play warzone on xbox while playing with keyboard and mouse PLESE HELP ME
i need more info to be able to help you bro
So u mean i dont really need a controller to plug in? i just need the KnM and Zen. So im good to go and ready to use those script right?
U need ur controller connected
@@jagermain4658 not if your on PC
Hey dude.
is it necessary to have the controller connected?and if so, where do I connect it? at the cronus port or on the pc?
Thank you.
you do not need a controller if you're playing on pc
@@GL0ZZ3NTechReviews I do not know what is wrong or if you can help me but the mouse does what it wants when I go to play ... while I have done the buttons correctly when I go to move it the mouse reloads, throws 2.3 bullets and reloads again. the movement is ugly ... it goes where it wants.
Can you help me?
Will the CZ allow you to be seen as a console player in lobbies?
yessir. that is 100% correct. You get to shoot at potatoes
Liked and sub. Thank for everything.
Bro, How can I change de Keys for slide, prone or crunch (WARZONE, MODERN WARFARE) on PC? I can not do Slide Cancel during use Zen (with Mouse and Keyboard) In game When I'm trying to run and use the slide, the character can't slide or slide cancel He was crunch and then prone. The key binds doesnt match controller/keyboard and mouse)
idk what you mean - you just need to see which controller button does the in-game action you want, then map your KB key to that button in your mouse settings.
Appreciate the videos I've spent the entire day trying to get my M/KB and Zen to work with PS4. I'm obviously a M/KB user and am running into a few things driving me nuts that I can't find tune. For starters it feels like slow movements with mouse are fine but if I go to snap on a target I'm doing a full 360 insanely fast. Also keybinds for keyboard are brutal cause I can't map them how I previously used it cause there's no overlapping keys. Any insight on this?
The Zen emulates a controller and we are forced to use the keybinds the game dev's choose. - like not having a separate button for crouch and prone. Tuning is a separate beast, its more of an art than a science right now. I generally try to keep my acceleration around .97 -> .99, smoothness makes a huge difference as far as response, I've found that having it 50 -> 70% works pretty well. What game are you playing? I may have some settings posted on the forums
@@GL0ZZ3NTechReviews I actually wrote you on your other video bc im trying to find someone who really knows the m&k setttings. I have tried a few but im not having the best luck. Mostly all warzone on pc
@@GL0ZZ3NTechReviews is it a mußt have, that i use a usb Switch?
I can pull Mouse and Keyboard out of the Zen and put it for doing settings into the PC and then back in the Zen? Or doesn't it work this way?
Regards from germany.
often jumble of cables that you have looks like chernovil after the explosion still good job;)
I used to try and keep them organized, but I also take my PC out to clean it pretty often so its a never ending battle. Eventually the cables won.
could i use controller through the zen on PC?
Yes, 100%
Is there anyway to use a DualShock 4 controller on the zen on pc like I’ve tried everything but it won’t connect but on my console it connects
Yeah bro, change your output emulator option to XB360 so your computer thinks you are using an XB360 controller
@@GL0ZZ3NTechReviews I did do that still won’t connect
@@KurdAholic give me a min bro and I'll record a potato cam video at some point tonight
@@GL0ZZ3NTechReviews alright
@@GL0ZZ3NTechReviews yo can you make a vid how to connect a ps4 controller to a zen on pc
I am connecting the cronus zen on the pc using keyboard and mouse. I can move smoothly and use all the mapped keys on the keyboard and mouse. the problem is when I want to use the scritp. The script does not work correctly, for example, in a war zone, 'no recol' or 'aim assist' does not work. Can someone help me?
you need to tune the values of the anti-recoil so that it actually works with your gun. I know the Warzone PRO PACK will only activate anti-recoil when you are holding the ADS button down, so if you are using a toggle-aim it does not activate. I believe an update is coming soon though. I've brought this up with the developer.
@@GL0ZZ3NTechReviews Thank you for your help !!
I realized that the dead zone greatly influences the recoil of the weapon. Adjusting the dead zone correctly will make setup easier!
@@juliosilva9749 No problem, glad I could help out :)
But what does game play look like
Love the setup, replicated the same.
Setup seems rather easy, just configuration of the key bindings (can’t figure out some of the controller bindings to rebind for mine) + having a hard time moving view around with the mouse once all is setup. Very hard to look around... any help?
Did u put max sens
I followed step by step, bought the sabrent switch, watched the video on how to connect everything. and i still cant get my keyboard to work once Im in the game. (i did switch back and forth between KM on the sabrent) and still nothing. Idk what im doing wrong
What type of keyboard are you using? I know people with Corsair keyboards and a couple other brands have to switch the KB to something called "bios mode"
@@GL0ZZ3NTechReviews yes the Corsair k63.
@@mauriciomedrano2806 Yeah, throw it into bios mode and it should work - idk what that means exactly because I don't use a corsair KB, but thats what the instruction manual says to do and other users report that it fixed it for them, haha.
@@GL0ZZ3NTechReviews so I put it on bios mode. But for some reason the sabrent just keeps throwing me back to controlling the PC only, and doesn’t let me switch it back and forth between Cronus and pc. Once I get in the game. To switch the controls between controller and kbm, the controller is locked. And only kmb is activated for usage.
dont use corsair..when i switched to another kb..it workd
Only the mouse or the keyboard works for me. It’s random, sometimes it’s the mouse, sometimes it’s the keyboard. Any ideas?
I have same problem. Is it solved for you?
Very strange, I haven't had that issue. What brand of MnK are you using?
@@GL0ZZ3NTechReviews my problem solved buy now i cant move mouse in looting deadboxes in Apex Legends
@@prcgame5856 how did you solve your problems? My keyboard shows as a mouse?
Cheers
Where did you get the holder for the zen?
I make them :)
Interested in selling one?
@@phyllipkennedy8705 damn you’re a sad man
Can u make a zen setting for replicate of pc movement (11-11- ads 58) "pc" PS4 100-100 ads 58 but little too loose
Little too loose on ps4
Help pls
im not sure what you mean by too loose
good morning friend excuse the question i have both cronus zen and xim apex what do you recommend to use on ps5 with mouse and keyboard!? i started now to use mouse and keyboard with xim apex before i was playing with pad on ps4-ps5 with cronus zen .. ... they told me that xim apex on ps5 is better for mouse and keyboard what do you think?! you can have good advantages with cronus and mouse and keyboard ?!
If you want to use MnK with controller mods like anti recoil, rapidfire, etc, then Go with the Zen. If you ONLY want to use your MnK and dont want any mods, I would personally go with a Xim
but for your opinion .... leaving the mods alone ... as a response to commands with MeK better the xim or the zen !?@@GL0ZZ3NTechReviews
Can i get aim asist with mouse and keyboard with cronus zen?
İ am on xbox series s
Yes. Zen translates your MnK into controller signals, so you get the same aim assist controller players use
Do you get aim assist too?
Got everything to work, but I just cant get the mouse to feel good in-game with any settings whatsoever....any suggestions?
go to forums, grab my linear settings
@@GL0ZZ3NTechReviews Thank you so much! just some small tinkering with ADS but its a WORLDS better than whatever the heck I was doing lol.
@@jurbs89 Awesome! Glad they worked out for you. Everyone will have a different personal preference, but I try to supply good base settings that are easy to work with for everyone
Was there a delay?
@@GL0ZZ3NTechReviews where is this forum can I have the link please?
Why is my keyboard not working? Like it won’t detect
Have you checked to see if it was on the supported devices list?
Thanks man!
Happy to help!
but do I need the console controller, or just the mouse and keyboard are enough to get the aim-assist?
If you're playing on pc, you do not need any controllers connected
@@GL0ZZ3NTechReviews is there a video of yours with the cronus links to have the aim-assist for those who only use a mouse and keyboard from a pc?
Why didn’t my zen not pick up my keyboard
You got a discord where you can help me figure out what I'm doing wrong? I'm sure its user error. I bought the Cronus Zen and the Hub and Switch but can't get it working.
There's official cronus forums bromigo. Also official cronus discord with tons of helpful people
@@GL0ZZ3NTechReviews I looked all day and couldn't find a single topic on the actual setup for MnK using a Hub and Switch.
@@SnDScholar go to my videos, its a potato cam video. You see my wriging on a piece of paper explaining how everything is connected :)
@@SnDScholar ruclips.net/video/LqiypGL3BRs/видео.html
@@GL0ZZ3NTechReviews I'll check it out hopefully this solves my problem. Thanks for your time.
hey bro does it work on keyboard and mouse without joystick
Yes it does.
@@GL0ZZ3NTechReviews works on computer without joystick, thanks for the reply
Mines is working but I need help with Xbox keyboard button assignments
And mouse
ok, not a problem. I'll try to whip up a quick tutorial when I get home to show how to map mouse buttons. I use a logitech g502, so the extra buttons have to be assigned to press a keyboard key (I personally use the numpad buttons because i do not have one on my KB) so that the Zen is able to see them. Like, my extra buttons by my left click are mapped to NUM1 and NUM2 in the logitech software
@@GL0ZZ3NTechReviews one more question i just assigned the key bind but when i play warzone i try to ads and shoot at the same time it wont let me it will just go back to holding the gun normal way
@@GL0ZZ3NTechReviews i cant ads and shot with lt and rt im using a keyboard and mouse on pc
can you make a video on how to do this on xbox or ps4?
Sure. what are you wanting to see exactly?
@@GL0ZZ3NTechReviews I would love a complete kbm with cronus zen on console setup video, i think the vid will do well too.
I would also love to see how to find the best keybinds/sens for it... i tried it today and everything was off, i just gave up.
How about a different game like apex. can help do a video?
Yeah, for sure. I just do alot of call of duty because its really popular
I tried everything but still wont work. can you please help? the mouse and keyboard is still not working. thank you!
Hey mate, happy to help I had huge issues with mine as well and managed to get across the little detail that videos out there missed. Let me know.
@@mikehud22 mine still not working. Could you help me please?
I need more details than just " not working" to be able to provide any assistance bromigo. Whats going on exactly, how are you setup, etc?
@@GL0ZZ3NTechReviews i did all the settings like the one on the video but whenever I start the game the mouse and keyboard is not working.
@@ginodeguzman7953 sure what isn't working at the moment!?
Also easy fix for Keyboard not working, just put your Keyboard in Bios mode it will then work like a charm.
Hey! Someone who ready the instruction manual :)
Can someone tell me how to do this? I have a Logitech G915. The zen recognizes my G903 mouse but not the keyboard
@@shadowguardian321 Google how to put your Keyboard in Bios mode. Only issue with this is you can't alt tab as it will generate window command. Also use a switch board.
@@mikehud22 I've tried I haven't been able to find how to put any Logitechs into BIOS mode. And it's sad because everything else works fine
@@shadowguardian321 mine is a corsair, this is how it works,
Hold, Esc+F1+window key next to ctrl plus the lock pad key on your keyboard all at once for 5 second then the light will start flashing and you are in Bios mode.
One way to know if you have or need Bios mode is to test your keyboard on a console if it works then you don't need Bios mode if it doesn't then give me you keyboard model number. Happy to help.
the only way it fixes this issue is don't plug in the short cable into USB 3.0. As soon as I plugged it into my USB2.0 it worked and allowed me to swap to Controller and worked in game. My issue now is my Keyboard doesn't work. Hope that helps someone
interesting, I have mine plugged into usb 3
@@GL0ZZ3NTechReviews unsure why but as soon as I put it into the usb 2 it worked I've tried plugged it back in the 3 and nothing.
@@mikehud22 good info. Usb 2 and usb 3 send different amounts of power to the device, I wonder if its something funky going on with usb3 and the zen
@@GL0ZZ3NTechReviews it could easily be from case to case as I used my case usb port but shouldn't make any difference.
I have same problem. My keyboard doesn't work. Is it solved for you?
Is there aim assist with mouse ?
Pls help...mouse working (502 hero ) i can shoot , all good , but i have asus keyboard , key map it’s ok, all buttons command , but keyboard not work.... It does not respond to any buttons , i tried device monitor keyboard...i press the buttons on keyboard but nothing...thanks
Does the asus keyboard have a bios mode setting? If so, switch over to that
I have same problem. Is it solved for you?
@@prcgame5856 yes , i buy logitech g213 keyboard...:D and now okee
Yo bro I want you show us how you use in on red dead like pvp
Bro has two zen sheessshhhh
I have 4 actually ;)
@@GL0ZZ3NTechReviews what that crazy are they like broken or do you have them to have them
followed this guide and the thing still doesnt work lmfao
just wasted my mf money
i mean.... it works for everyone else. if you want to act like a little bitch baby about it, i wont bother giving you any support, but if you want to come on my channel like a sophisticated member of society and ask politely, I have no problem explaining things and helping you troubleshoot.... you know... because tens of thousands of people are already using this device with no issues....
And your telling me that this is undetectable too?
Yea, when you use the Auth controller, the cronus tricks the console into thinking its just a regular controller because device ID is cloned from your regular controller. Lol
love u
would be great if you didn't show people how to cheat
mehh, go try at real life.
@@GL0ZZ3NTechReviews No way you just said that when you play Mouse and keyboard on console video games. Come and try to cheat your way out of Special Forces training.
pizza or burger?!!!!!!!!!!
why not both?
pretty amazing - you don't reply to me then you erase my comments ?
Do you feel threatened by an old man ?
I am also a veteran .
So what's your problem ?
But warzone already uses mouse and keyboard..
This allows you to play in controller lobbies and use mods like anti recoil, rapidfire, etc
Fair enough
I tried my brother's and it seems pointless, there's so much mnk lag and it feels terrible to use as apposed to the games actual mnk support. Most modern warfare players use controller anyway so they can abuse aim assist. A bit of a novelty item imo.
@@sasharettren9174 That's because he doesn't have his MnK settings tuned properly. Its going to feel laggy and like crap if your deadzone is set too low (your fine hand movements will be ignored because they fall within the deadzone you specified)
I have CoD feeling like PC bro
Cappin 🧢 scrolling through comments everyone who tried has problems...
because people who don't have problems have no reason to say anything because shit works. idk what to tell you. I can get on the camera and do it every single time. Following instructions isn't that difficult
@@GL0ZZ3NTechReviews must be nice to use a Cronus. No skill having ass. lol 😂