Good morning 🌅, That looks like a great Lift , I am a old dude living in France, been looking for bike lifts, I ride a HD DEUCE, a lot of lifts are to short, France,
@@Hog-g2z it’s a great lift. A little narrow at times when used with a rear stand, but it works. The sportbike lift attachment is nice, but if I had to do it again, I wouldn’t have purchased it.
Excellent video, Derrick. I don't ride a sport bike but I enjoy your enthusiasm about your sport bike and equipment to work on your bike(s). You sold me on purchasing a K&L table lift for my bike. Appreciate the videos. Have a fine week. 👍🏽🤠 7/10/23
Thx man. My K&L is still going strong. The build quality is bullet proof. Having said that, that paint isn't great lol. I made another video about the flaking paint that was a bit tongue-in-cheek, but apparently, that didn't come across very well lol. I'm very satisfied with my purchase and don't regret it one bit, even with the flaking paint hahaha!
Thanks. I'm not too concerned about paint flaking. The paint doesn't hold up my Harley, the lift does 😁. I'm considering the K&L MC625 but have to hold off a bit to get my funds in order. I'm juggling several financial items to make the lift purchase fall into place. Thanks again and be safe. Have a fine week. 👍🏽🤠 10/18/23@@ESBKLife
Great video. Not going to lie but at 10:56, my “Pucker” factor sky rocketed. That was definitely the true meaning of “Trust Your Equipment” Good stuff brother
hi handsome, at 11:04 I thought that bike and lift were going to crash down. oh my goodness, that lift can hold that bike at that angle, unbelievable. I don't think harbor freight can do that. Great product review. I like this lift. this lift is 5x better than the rest. what a great product. No one online has ever shown a lift like this. 🎉
Uau! Awesome! When you have more videos about F3, they are welcome. I believe “she” is a quite rare bike! At least where I live. So any information about the bike is very grateful. Last week I solve a problem with the rear break and occasionally I found your channel. Very nice channel. Rgs
Do you happen to know if this lift arm kit will work on a ducati 1299? It has two holes on either side however half moon cut outs would have to be made on the right and left side of the lower fairings. I had to make the cut out on the lower left side in order for the bursig lift insert to slide in. But do you think the arms on the MC620 kit would go low enough to slide into those holes? Or would the bike need to be lifted a bit with a front and rear stand first to bring it up a bit higher so those arms would work?
@@Ricardo-xo6df Hey Ricardo. The only problem I’ve ever had with this lift is the paint flaking off the bottom where it shouldn’t have been in the first place. Otherwise, it’s been flawless and I’m super happy with it!!
I was watching on another one of your vids. about the paint peeling problem well man look that is a working area where the rollers run up and down the frame that will happen on any thing that has weight on it I can or you can grease that lightly to keep it from rusting I still see your point new and flaking of the paint but I myself can look past that still great vids. now on with finishing watching this vid. Oh yeah I could not post on the other vid,
@@ESBKLife Thank you Derik. Here in Brazil it is difficult to achieve some things. This K&L Supply Lift Arm, for example, I tried to import before, but the manufacturer is difficult. He asked me so many questions that I even gave up buying. Att Cocaine Motorock, Performance Racing.
Good morning 🌅, That looks like a great Lift , I am a old dude living in France, been looking for bike lifts, I ride a HD DEUCE, a lot of lifts are to short, France,
@@Hog-g2z it’s a great lift. A little narrow at times when used with a rear stand, but it works. The sportbike lift attachment is nice, but if I had to do it again, I wouldn’t have purchased it.
Excellent video, Derrick. I don't ride a sport bike but I enjoy your enthusiasm about your sport bike and equipment to work on your bike(s). You sold me on purchasing a K&L table lift for my bike. Appreciate the videos. Have a fine week. 👍🏽🤠 7/10/23
Thx man. My K&L is still going strong. The build quality is bullet proof. Having said that, that paint isn't great lol. I made another video about the flaking paint that was a bit tongue-in-cheek, but apparently, that didn't come across very well lol. I'm very satisfied with my purchase and don't regret it one bit, even with the flaking paint hahaha!
Thanks. I'm not too concerned about paint flaking. The paint doesn't hold up my Harley, the lift does 😁. I'm considering the K&L MC625 but have to hold off a bit to get my funds in order. I'm juggling several financial items to make the lift purchase fall into place. Thanks again and be safe. Have a fine week. 👍🏽🤠 10/18/23@@ESBKLife
Great video. Not going to lie but at 10:56, my “Pucker” factor sky rocketed.
That was definitely the true meaning of “Trust Your Equipment”
Good stuff brother
Haha! It's all good, that bike isn't going . Anywhere :)
hi handsome, at 11:04 I thought that bike and lift were going to crash down. oh my goodness, that lift can hold that bike at that angle, unbelievable. I don't think harbor freight can do that. Great product review. I like this lift. this lift is 5x better than the rest. what a great product. No one online has ever shown a lift like this. 🎉
I wouldn't try that with a Harbor Freight lift 😀
Wow.. that’s a very nice lift. I might have to get me one. Like always keep up the good work buddy looking forward to more videos..!
Thx Justin, I love this thing! Not sure why I waited so long to get one?
Wow that's a nice lift! Damn sweet. Congrats man !
Awesome, looking forward for more tutorials working on the bike, with even better views!
Wow that lift is really cool!
Very impressive video..excellent job..looking at the MC500R
No busa I work on alot of them but it's still a nice lift I may get one of these later
The table is great other than the pealing paint, but yeah the lifting arm setup will not work on a busa lol
Uau! Awesome! When you have more videos about F3, they are welcome. I believe “she” is a quite rare bike! At least where I live. So any information about the bike is very grateful. Last week I solve a problem with the rear break and occasionally I found your channel. Very nice channel. Rgs
Thx Daniel! I'll be posting an HID headlight install on the Mv fairly soon and I'm hoping to put her on the track before too long.
Derrick Disharoom...Have you thought about LEDs vs HIDs?
Yes. The RSV4 has LEDs and the the F3 800 will be getting some shortly. Stay tuned.
Awesome review GREAT JOB!!!!!
K&L is the best period. 🎉
Hi what size compressor would be suitable with this lift. Thanks
That's nice.
hi have you used dyna beads in your tires for self balancing?
I haven't but, it sounds interesting. I'm not sure how useful they would be on a sportbike, but I could see them working on a dirt bike or quad.
Do you happen to know if this lift arm kit will work on a ducati 1299? It has two holes on either side however half moon cut outs would have to be made on the right and left side of the lower fairings. I had to make the cut out on the lower left side in order for the bursig lift insert to slide in. But do you think the arms on the MC620 kit would go low enough to slide into those holes? Or would the bike need to be lifted a bit with a front and rear stand first to bring it up a bit higher so those arms would work?
2024 how is that Lift holding up?
@@Ricardo-xo6df Hey Ricardo. The only problem I’ve ever had with this lift is the paint flaking off the bottom where it shouldn’t have been in the first place. Otherwise, it’s been flawless and I’m super happy with it!!
@@ESBKLife Thanks for the Reply, mine its on the Way, i hope manufacture did something about the Paint.. will see
I was watching on another one of your vids. about the paint peeling problem well man look that is a working area where the rollers run up and down the frame that will happen on any thing that has weight on it I can or you can grease that lightly to keep it from rusting I still see your point new and flaking of the paint but I myself can look past that still great vids. now on with finishing watching this vid. Oh yeah I could not post on the other vid,
Yeah I know. That area should have never been painted first place. Just wanted to share. However, other than paint, the lift has been great.
Sweet
Awesome
Do you do track days at Wilcox?
Yeah I've been down to Inde. I plan on making another trip down there this fall.
Necesito una mesa así y todos los accesorios!!! Raceeeeee
good afternoon. I really want to buy one of these but I don't know if it would work on my lift. could you please give me the dimensions of your lift?
klsupply.com/shop-lifts/mc615r-air-lift.asp
@@ESBKLife good night nan. unfortunately the site does not have the measurements. had already looked for.
@@cocainemotorock3763 ok, I'll get the exact measurements in the morning.
84"x24"x2". Hope that's what your looking for my friend 🙂
@@ESBKLife Thank you Derik. Here in Brazil it is difficult to achieve some things. This K&L Supply Lift Arm, for example, I tried to import before, but the manufacturer is difficult. He asked me so many questions that I even gave up buying. Att Cocaine Motorock, Performance Racing.
wow!