WOW. My washer was new in 1992. I still have it. And I don't plan to get rid of it after seeing these new washers. I'll just keep fixing it for 20 to 30 bucks every 3 to 5 years.
I have both a early 2000's Kenmore 70 series washer and also a 2010 Kenmore compact stack unit. Both of these are the old school direct drive and clean clothes fantastically. I won't ever part with them. It's well worth spending the money to repair them if they break down. I know many people with various types of the HE/Energy Star washers that absolutely loathe them and deeply regret purchasing them.
We loathe them because they take too long to clean, aren't built well with quality parts like the vintage machines, and they break down more frequently. What is to love?
I bought a new large capacity top load Kenmore washing machine with agitator in 2018. I bought a Kenmore dryer at the same time. They both work great, but the silver/gray area behind the control dials/knobs has some kind of spotting that almost looks like mold. I can’t figure out what it is and nothing I’ve tried so far will remove it. Any info on this would be appreciated. Thanks.
Have a VMW style washer andvHATE it! Want to replace it with an older machine. The one I have wastes time,tangles clothes around its agitator or constantly goes out of balance and shakes itself across the utility room OLDER MACHINES ARE SO MUCH BETTER !!!
@@SuperBullyone Go to a used appliance shop-“swap shop as they called. Sometimes shops that sell new machines sell you a trade in machine-ask them. Sadly the stock of the classics are getting scarce. Check around and tell the place what you want. They could put a machine you want aside for you.
No the corporations sold out to the lure of outsourcing -- more profit for them. They don't WANT to make a machine that lasts, they've conspired tomake machines that break down so you the consumer have to buy a new one more often. Plus the new machines are poorly engineered.
I thought, based on it saying "Kenmore Classic", plus the thumbnail of THAT agitator, they were talking about the almighty direct-drives. I'm not even surprised. SEARS, MAKE REAL WASHERS AGAIN.
You know what sucks is every single washer manufacturer now except for Speed Queen builds their washers very cheaply. They look like childrens toys now.
No no no, I still have my Frigidaire Gallery Washer and Maytag Washer for 20+ years. I can wash a load of clothes in 15 minutes and have them dried in another 20 to 30 minutes. I've been looking at new washers for the last 4 years. I can not find anything that out performs my old $200 washer, and never had to repair it. It's only a 3 Cu top load washer and have been looking at 4+ cu. No current washer has convince me to go their way for washing clothes for 45+ minutes. I think washer brands have turned cleaning into a scam. My washer is a drop and wash washer, no waiting for a computer to figure out what... clothes capacity and weight; So laughable.
@@tennillej9601I have a LG HE washer just use water plus and it will clean great also I some times watch the washer so it doesn’t leak like my old classic Maytag Atlantis
WOW. My washer was new in 1992. I still have it. And I don't plan to get rid of it after seeing these new washers. I'll just keep fixing it for 20 to 30 bucks every 3 to 5 years.
I’m with you on keeping my 2005 washer. These new washer are nothing but junk.
Its better that way( cheaper to keep her)
Lol😂😂😂
I have both a early 2000's Kenmore 70 series washer and also a 2010 Kenmore compact stack unit. Both of these are the old school direct drive and clean clothes fantastically. I won't ever part with them. It's well worth spending the money to repair them if they break down. I know many people with various types of the HE/Energy Star washers that absolutely loathe them and deeply regret purchasing them.
We loathe them because they take too long to clean, aren't built well with quality parts like the vintage machines, and they break down more frequently. What is to love?
It is important to understand that each cycle has been desired to optimally clean specific load types,
When using fabric softener, you will also need to select the fabric softener switch to ensure dispensing,
and the water temperature appropriate for the items in the load.
I bought a new large capacity top load Kenmore washing machine with agitator in 2018. I bought a Kenmore dryer at the same time. They both work great, but the silver/gray area behind the control dials/knobs has some kind of spotting that almost looks like mold. I can’t figure out what it is and nothing I’ve tried so far will remove it. Any info on this would be appreciated. Thanks.
Followed by a short spin with water entering the wash basket to help knock down any remaining suds.
If you desire to add an extra rinse, select the Second Rinse with fabric softener.
During the rinse portion of the cycle, you will hear similar sounds to the wash portion as the washer
If you wish to use fabric softener, add the measured amount into the fabric softener dispenser
If there is no Energy Star logo, you can use regular detergent or HE detergent.
During the final spin, the washer spins the load at variable spin speeds in order to protect clothing,
Depending on low size and final spin speed, it can take up 2 minutes for the basket to come to a complete stop.
The washer is determining is there is a potential out of balance load through a series of spins of the
The combined action of the agitator and basket move the load through the water.
The basket progresses through periods of spinning and coasting to achieve the highest spin speed,
If you need to add a garment after the lid has locked, press the Start/Pause button to pause the cycle.
With the Cycle Complete indicator lit, lift the lid and remove the load.
I still don’t get how detergent poured on top of the clothes could cause and have to pour detergent before loading the washer
and lock again in order to allow for proper load sensing.
This is normal and still provides excellent cleaning while saving water and energy.
If your washer does not have an agitator, use the Downy Ball included with your washer.
The wash water will empty through the drain hose at the back of the washer.
I had a amana washer with the start button but this washer looks a little bit different. I had that since 2012 but it's in the storage room
This washer acts different because on my washer when you press start on my washer it will just fill up and then lock the lid when it's time to wash.
Add the measured detergent into the bottom of the wash basket.
The agitator moves the clothes down the center to the bottom of the wash basket, and back up the
Once the lid is locked, these washers work differently by sensing an out of balance load.
These machines work much better than impeller machines!
sides of the wash basket to aid cleaning.
Before starting the cycle, look for the Energy Star logo on the council.
Add measured fabric softener into the Downy Ball.
Locking the lid allows for high speed spinning.
Select the water level based on your load size,
Look for the HE label on the box or bottle.
While the basket is coasting to a final stop, you may not hear any sounds coming from the washer.
Add items and loose heaps evenly around the basket wall.
Let's look at a few of the differences.
Some cycles have spray rinses.
The fabric softener will be released with the second rinse.
This washer will clean the load effectively and efficiently throw the following actions.
This is part of normal operation in the beginning of the sensing sequence.
If we had this load with heavy soils, or a larger load, we would select the heavy duty cycle.
The drain pump sounds like it was hesitating to start!
After the balance has been determined the washer adds water based on the selected water level.
Be sure to add the detergent before you load the clothes.
Be sure to close the lid and press Start to continue the cycle.
Basket?? Aren't we loading the clothes into the washer tub?
Because we have an average size load of everyday wear with light to medium soils.
Be sure to dilute with water, just to the top of the dispenser.
Let's take a listen.
Have a VMW style washer andvHATE it! Want to replace it with an older machine. The one I have wastes time,tangles clothes around its agitator or constantly goes out of balance and shakes itself across the utility room OLDER MACHINES ARE SO MUCH BETTER !!!
where can I buy an old style machine?
@@SuperBullyone Try looking for used appliance places near you.Sometimes appliance dealers sell their traded in machines.
@@SuperBullyone Go to a used appliance shop-“swap shop as they called. Sometimes shops that sell new machines sell you a trade in machine-ask them. Sadly the stock of the classics are getting scarce. Check around and tell the place what you want. They could put a machine you want aside for you.
No the corporations sold out to the lure of outsourcing -- more profit for them. They don't WANT to make a machine that lasts, they've conspired tomake machines that break down so you the consumer have to buy a new one more often. Plus the new machines are poorly engineered.
Sears is Kaput
For best results, load items no higher than the top of the basket.
For example, we are selecting the normal cycle.
Close the lid and select your desired cycle.
The lid LED will begin to blink and the lid will unlock once the basket has come to a complete stop.
My fabric sofner pours out after mywasher done
I thought, based on it saying "Kenmore Classic", plus the thumbnail of THAT agitator, they were talking about the almighty direct-drives. I'm not even surprised. SEARS, MAKE REAL WASHERS AGAIN.
I’m 100% on that boat with you
They can’t! Nobody can. Gov won’t let them. Nobody makes the old direct drive anymore.
Sears is Kaput
I thought Sears in the USA went out of business
That out - of - balance load could break 1 of the 4 suspension rods off. 6:26
During the wash portion of the cycle, you will hear sounds like this.
These washers operate and sound different than traditional agitator washers.
Press the Start button to begin the cycle.
If the washer does not have a dispenser because it can have a agitator but no dispenser… such as on the older models…
while adding water in an attempt the out of balance situation.
Items will be wet, but may not be completely underwater.
You know what sucks is every single washer manufacturer now except for Speed Queen builds their washers very cheaply. They look like childrens toys now.
This will add time to the total cycle time.
At the beginning of the cycle, the Fill light will turn on and you will hear the lid lock, unlock,
Detergent sitting on the top of the clothes could lead to staining.
While these washers operate and sound different than a traditional agitator washer.
With these rinses, you will only hear water coming into the water for a short period while the
with the proper amount of rinse water.
Does anyone know this model number
4:54 What are talking about? I see a full tub of water there
Some HE top load washers have an option of selecting the water level
and the Use & Care Guide.
I love it
You will hear the lid lock again.
Love it
If you have an Energy Star qualified washer,
which saves drying time and energy.
Please see the Use & Care Guide for more information on rinsing.
At the end of the wash cycle, there will be a pause to allow to clothes to soak.
and soil levels.
If the load is out of balance, the washer will proceed through a series of agitation and slow spins
throughly rinses the load.
I can’t even count how many comments you wrote omg LMAO I can’t imagine having that type of time
I see a full tub of water in the video
maintain balance and maximize water removal.
basket spins slowly.
No no no, I still have my Frigidaire Gallery Washer and Maytag Washer for 20+ years. I can wash a load of clothes in 15 minutes and have them dried in another 20 to 30 minutes. I've been looking at new washers for the last 4 years. I can not find anything that out performs my old $200 washer, and never had to repair it. It's only a 3 Cu top load washer and have been looking at 4+ cu. No current washer has convince me to go their way for washing clothes for 45+ minutes. I think washer brands have turned cleaning into a scam. My washer is a drop and wash washer, no waiting for a computer to figure out what... clothes capacity and weight; So laughable.
Let's listen to normal drain sounds.
More details on these load types and soil levels can be found on the Cycle Guide page,
The first thing you will notice is that no water enters the washer for up to 2 to 3 minutes.
That's a VMW model washer.
Have an Amana with the same tub and similar dual action. Mine washes and performs very well. These aren't bad washers at all I have so far found.
Thay bounce and tub glides to much wich makes this sound like a helicopter
Now, load the washer.
than traditional top load washers.
at the top of the agitator.
U S E L E S S W A T E R T H A N T R A D I T I O N A L T O P L O A D
Probably due to spray rinse cycle
Too many people think that these he washers don’t clean properly. I have one and it cleans better than the old traditional washer
Lies
🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢🧢
@@DylBuilder1 not even close lol. Its physically impossible for these to clean better based on design.
If you add two items of clothing sure...
@@tennillej9601I have a LG HE washer just use water plus and it will clean great also I some times watch the washer so it doesn’t leak like my old classic Maytag Atlantis
These comments are straight up CANCER!!!
[lid lock sound effect]
After draining the water, another pause will occur.