It will be a mountain snow ski snowmobile adventure video and the fly though text to the view from the top of the Canada rockies. will be the opening ..It's freaking perfect
I was trying from yesterday to find a tutorial about a flying through text and from RUclipsrs with a lot of followers and none of these videos worked also it was like every tutorial was the same and over 10 minutes...then I found yours I followed the steps and everything worked just fine thank you for that 🙏🤙...I followed your channel great job... also if it's easy for you I would love to see a tutorial about how the 3d nodes interact with each other in fusion that would be great thanks again
I'm glad my tutorial helped you! I have tons of them about flying stuff 😂, you can check my fly-through playlist, and also one of my latest videos where I fly through 3D shapes (also in fusion). And of course I can make a video for your request. Do you have any specific effect you'd like the video to be about so I can show you how the nodes work?
Would love to understand how you could create a stone material on the text with erosion and damage to the surface of the 3D text. Like the Warner Brothers WB graphics at the beginning of their movies, say Harry Potter or IT.
My text appears only in the very end of clip and in a reverse motion, instead of flyting through and leaving text behind, the text comes into the picture from behind :(
Thank you for this work, great, simple y efficient The problem for me is that you speak very quickly, I'm not native english spoken, I don't have the time to see what you do and understand at the same time. Thanks
I really appreciate you took your time to answer me. I will of course google this also:) I am on Effects>Tamplates>Fusion>>Shaders, and there is nothing to select there.@@leodiaseditor
➜ My effects and soundtrack: 1.envato.market/eK1N61
------------------------------------------------
My gear:
➜ Blackmagic Design Pocket Cinema Camera 4K: amzn.to/3H5ctha
➜ Panasonic LUMIX 12-60mm Camera Lens: amzn.to/3N6p6N0
➜ Apple Mackbook Pro M1 14": amzn.to/40pVDk9
➜ Sennheiser Portable Wireless Combo Set: amzn.to/3L0T8Ph
➜ Tripod Miliboo: amzn.to/3Ljmo5o
➜ Logitech MX Vertical Wireless Mouse: amzn.to/3KWkWod
It will be a mountain snow ski snowmobile adventure video and the fly though text to the view from the top of the Canada rockies. will be the opening ..It's freaking perfect
@@IdahoMthman sounds wild! Got me curious!
Great and well explained. Thank you
Fantastic, thank you.
Thank you very much!
Thank you for this. Is there anyway to use this and then transition to another bit of footage when you fly through the letter?
That’s a lot of work in the confusion tab 😂 But I’ll give it a try. Thanks for the video.
😂 confusion tab! That's new to me 😂. Thanks for the comment!
Vc é muito cascudo Leo, obrigado pelo vídeo ❤
Disponha!
Hello, Thanks for the video. Could you please let me know if all the features are included in the Davinci Resolve studio? I am
Planning to purchase
Hey! Thanks for the comment. Yes, it's all available within the studio version.
I was trying from yesterday to find a tutorial about a flying through text and from RUclipsrs with a lot of followers and none of these videos worked also it was like every tutorial was the same and over 10 minutes...then I found yours I followed the steps and everything worked just fine thank you for that 🙏🤙...I followed your channel great job... also if it's easy for you I would love to see a tutorial about how the 3d nodes interact with each other in fusion that would be great thanks again
I'm glad my tutorial helped you! I have tons of them about flying stuff 😂, you can check my fly-through playlist, and also one of my latest videos where I fly through 3D shapes (also in fusion).
And of course I can make a video for your request. Do you have any specific effect you'd like the video to be about so I can show you how the nodes work?
That's one of many amazing skill in DR to master. Thank you so much🤩
I agree! I love working with 3D. Glad you liked it!
GREAT VIDEO NEW SUB.. THIS WAS EASY TO MAKE THANK YOU
Glad you liked it! Thanks for the comment and sub!
@@leodiaseditor you are so welcome
Awesome I have a great idea for this
Cool! Show me later :)
Hey, nice tutorial!! What if I want my next clip to start from within the text letter i am flying through? The D in your case.
Then that's a whole other video about mask transitions. I can make that if you want :)
Would love to understand how you could create a stone material on the text with erosion and damage to the surface of the 3D text. Like the Warner Brothers WB graphics at the beginning of their movies, say Harry Potter or IT.
My text appears only in the very end of clip and in a reverse motion, instead of flyting through and leaving text behind, the text comes into the picture from behind :(
I actually did it! haha thanks man
Glad to know that! Keep going, my friend!
IT IS POSSIBLE TO DO IT WITH A LOGO INSTEAD OF A TEXT?
Yes! If you have a 3D logo it's easier, otherwise, if it's 2D, you'd have to extrude it first. Actually you just gave ame a video idea :))
Thank you for this work, great, simple y efficient
The problem for me is that you speak very quickly, I'm not native english spoken, I don't have the time to see what you do and understand at the same time. Thanks
Glad you liked the video! And thanks for the feedback. I've been trying to slow down the speaking. Sorry about that!
first of all it's a great job, don't worry too much about the speed, it's at me of work my english !@@leodiaseditor
you can simply slow down a lil bit of playback speed at the settings@@laurentbeauplet7804 hope this helps 😊
Is this possible in the free version of daVinci?
Yes, absolutely :)
This is nice, but when I come to Templates>Shaders, it is nothing to choose there. What are I missing?
Thanks for the comment! Are you sure you followed the steps correctly? It should be Effects -> Templates -> Fusion -> Shaders. Let me know :)
I really appreciate you took your time to answer me. I will of course google this also:) I am on Effects>Tamplates>Fusion>>Shaders, and there is nothing to select there.@@leodiaseditor
Oops, sorry, youtube didn't notify me of your reply. Did you manage to find the assets?
Sorry, no I tried earlier today, but I will try again now. Which timezone are you in?
@@leodiaseditor
@@mortenwoldstad5137 I'm -3 UTC. Could you email me or direct me with a screenahort of your fusion page?
Warum fährst du nicht mit der Cam durch den Text?
Why don't you run the cam through the text?
Because in this case the footage already has a camera movement forward. If it was a static shot I would move the camera.
Can i do this with the free version?!❤
Yes! It's all avaiable in the free version.
One problem. your talking to fast
Can I do this with a png Logo? :)
Yes! It's the same process. Only difference is you might have to animate it's scale with the transform node, to give a motion feeling to the image
my text disappears before I fly through it
Sometimes it's a render bug. In the preview or export it should be fine. Let me know if it works! If not, contact me and I'll try yo fix it
@@leodiaseditor I started from scratch three times but finally got it to work. I think my text wasn't big enough so it looked funky. Thanks.
@@southerndig Glad it worked!
Man, you can do the same thing way much easier in Filmora. you need an engineer to understand this Davenci 3D Logarithm,
😂😂 that's good to know!
Fantastic, thank you.
Glad you liked it!