Bigger carburetor or put a pulse pump on it! Because it's probably sucking the bowl dry! My bt200x did the same and I put a pulse pump on and it's fixed it. I had a cam and pk-1 carb made by Tillotson. My motor was a 212 Predator Hemi I think with 22lb valve springs.
@@Black66 sweet bro! I subbed and have been watching all your vids on it lol. I literally bought it less than 24 hours ago. First mini bike/ motorcycle ever. First time riding something like this 😂
@@Black66 loving it so far got it up to 35! Just by bending the screw. 0-30 in 11 ish seconds. Going to buy the air filter soon and pop that baby on. Right now when I go fast it feels like it gives up on me a little. Is that because the air filter or because the throttle thing.
@@conley_v5848 yeah because mine from walmart has like this hose that'll go from the exhaust to this one thing that i dont know how of that's on the engine. it looks silver.
The hose that’s connected to the exhaust, what do you do with it when you connect the new exhaust pipe? I have a XtremepowerUS Pro-Series 99cc 3.5HP Gas Powered Off Road Trail Bike Dirt Bike Ride One Bike,
I have the same mini bike with a stage 4 Honda GX 200 and a 60 tooth rear sprocket. It will go a bout 45, I want to get a 17 tooth front sprocket and see how fast it will go.
It's 3.0 it's a good motor but I think u have to remove the governor from the inside,but mines did 41mph going down a slanted road and when it start powering down, let off the throttle for a second so the motor can catch it's breath and give it gas again. It should pick up some more
I did a video that will come out next Wednesday. I took the entire governor throttle linkage off. It totally bypasses the throttle spring and governor mechanism. You will be surprised how fast that thing is! It surprised me.
I got my 17tooth clutch on my DB30 with a 53 tooth sprocket. Long muffler, g90 jet, governor bypassed. It has tiny torque but my current top speed was 47. Streets to small where I'm at. But good luck and drive safe we'll see you in the next video
If you remove the entire throttle mechanism on the top of the engine and remove the spring from the governor mechanism, it wont run out of breath anymore. I did that on mine and now it flies.
@@hellheart1993 I have a video coming out next Wednesday. Where I bypassed the entire governor throttle mechanism on the Coleman bike. That thing flies now!! I was totally surprised.
Um I know you said flange from a 212 motor but the video makes it look like you used the flange from the motor. Did I not understand or is that accurate
Yes, I used a 212 flange. Check out the Micro bike playlist. I installed the Coleman 3 h.p on the Micro bike and added quite a few different parts to the engine. ruclips.net/video/DIAP9ncWEEk/видео.html
What pipe works best and do any come over fender in middle....or what do u recommend I've got govern diabled...what next and who's stuff do I need....thanks
Bigger carburetor or put a pulse pump on it! Because it's probably sucking the bowl dry! My bt200x did the same and I put a pulse pump on and it's fixed it. I had a cam and pk-1 carb made by Tillotson. My motor was a 212 Predator Hemi I think with 22lb valve springs.
Coleman bikes are sweet!!
Heck yeah Black, consistently putting out cool content!!
Thanks ! This thing surprised me. It is almost as fast as my Predator lol
learning so much man! Thank you. You got the best vids on this Coleman cc100x
Thanks! I have a lot more to come on this bike .
@@Black66 sweet bro! I subbed and have been watching all your vids on it lol. I literally bought it less than 24 hours ago. First mini bike/ motorcycle ever. First time riding something like this 😂
@@Rtrac44 Its gonna be a blast to ride!
@@Black66 loving it so far got it up to 35! Just by bending the screw. 0-30 in 11 ish seconds. Going to buy the air filter soon and pop that baby on. Right now when I go fast it feels like it gives up on me a little. Is that because the air filter or because the throttle thing.
@@Rtrac44 The governor still has an effect. If you bypass it all together it will keep going .
wasn't there like a hose to the stock exhaust?
Yeah I had the same question on mine it has one
@@conley_v5848 yeah because mine from walmart has like this hose that'll go from the exhaust to this one thing that i dont know how of that's on the engine. it looks silver.
@@proloxx Mine is a rubber tube with like a screw tie
Another good video
Thanks!!!
The hose that’s connected to the exhaust, what do you do with it when you connect the new exhaust pipe? I have a XtremepowerUS Pro-Series 99cc 3.5HP Gas Powered Off Road Trail Bike Dirt Bike Ride One Bike,
can you make a video of you jetting the carb pls i always get this problem to with mine
Ya, I'm gonna do a video on it.
I have a video coming out next week.You will be totally surprised how fast this thing is.
Actually, the video comes out on the 17th
I have the same mini bike with a stage 4 Honda GX 200 and a 60 tooth rear sprocket. It will go a bout 45, I want to get a 17 tooth front sprocket and see how fast it will go.
Awesome!! I bet a 17 tooth will make it fly !!
It's 3.0 it's a good motor but I think u have to remove the governor from the inside,but mines did 41mph going down a slanted road and when it start powering down, let off the throttle for a second so the motor can catch it's breath and give it gas again. It should pick up some more
I did a video that will come out next Wednesday. I took the entire governor throttle linkage off. It totally bypasses the throttle spring and governor mechanism. You will be surprised how fast that thing is! It surprised me.
I got my 17tooth clutch on my DB30 with a 53 tooth sprocket. Long muffler, g90 jet, governor bypassed. It has tiny torque but my current top speed was 47. Streets to small where I'm at. But good luck and drive safe we'll see you in the next video
Ya, I think it will get faster once you get the governor totally removed or bypassed .
@@hellheart1993 Maybe it will hit 50 with a longer street ?
If you remove the entire throttle mechanism on the top of the engine and remove the spring from the governor mechanism, it wont run out of breath anymore. I did that on mine and now it flies.
I’m new to mini bikes and I have a question about this my ct100 has a rubber tube attached to the stock pipe what is this and can it be removed?
Emissions tube I believe. Not too important
Great video
Thanks!
Can you get it to go as fast as your other minibike?
Faster then the other mini bike! 🤣 that'd be to funny.
I do know it top out more than a stock ct200 ua, ex, and btx. They do about 31 Stock with the governor bypassed
@@hellheart1993 I have a video coming out next Wednesday. Where I bypassed the entire governor throttle mechanism on the Coleman bike. That thing flies now!! I was totally surprised.
😀Yes, for sure! With a modified Predator 212.
Was the governor off or on in this video
Check out the playlist for this bike. I think I went in order on this one. ruclips.net/video/xSX1JvRi1RQ/видео.html
Did you leave the factory sprockets on it?
Ya, it's all factory .
This bike is super fast in the next video
Um I know you said flange from a 212 motor but the video makes it look like you used the flange from the motor. Did I not understand or is that accurate
Yes, I used a 212 flange. Check out the Micro bike playlist. I installed the Coleman 3 h.p on the Micro bike and added quite a few different parts to the engine. ruclips.net/video/DIAP9ncWEEk/видео.html
@@Black66 yeah I found it afterwards and binged all
Hey just curious what size jet you used.
I drilled the jet because the Coleman bike has an EPA carb with a nonremovable jet. Here is the video ruclips.net/video/U2R0BAWurFc/видео.html
What you think about the trail master 200
I really like the trail master bikes. I like the frame design . I think it would be a cool bike to modify .
Can u send me the link
On cc100x is the preditor 212 take same exhaust
What air and exhaust do I need for cc100x
@@davefrazier403 The cc100x has room for a lot of different exhaust options. Check out this video ruclips.net/video/tj8XxfvMbRE/видео.html
What pipe works best and do any come over fender in middle....or what do u recommend I've got govern diabled...what next and who's stuff do I need....thanks
👍
I would take the Mud Flaps off , day one. Less weight & drag. And it will look cooler.
Ya, true!
It would look better with all that off there .
Let'er rip!
Yes!!
@@Black66 nice job! Sounds better than some staged ones I've paid $40 for!!
@@fatbuddycat Thanks! Ya, I was actually surprised it sounded that good myself.
Your vids are good I always come to you but ain’t no 11 year old kid can do that
Thanks! Ya true, but you can always throw a pipe on there thats pre made.
Bigger. Jet
I figured it out! You will be surprised how fast this bike is in the next video.
So did the bigger jet work or what did you end up doing just got my Coleman CC100X bought a used one or $150.
Please take all those stupid ugly warning stickers off. It will look way better.
Ya, true ! Those stickers are ugly