This is what my dishwasher is doing. I select "normal" and press Start. It sounds like water is going in and then air comes out of the vent, but immediately switches to Auto and it blinks. I open the door and its empty inside. I tried reset and that did not work. I shut off the electrical for 5min and that did not work. Do you think its the thermistor? I hope you reply because it will save me money :)
If the auto and the normal light are blinking together then most likely this is your problem . I believe this is Samsungs built in fault indicator that something is wrong with that circuit. The thermistor is the most likely component. The thermistor is pretty cheap if I recall.
@@hc7760 Thank you for your reply. Its only the Auto light that blinks. When I checked the user manual it says its lack of water issue. My hot water valve under the sink is on so my guess is that its the inlet valve. Problem is I cannot see it at the bottom front of the dishwasher so it must be at the back, too much cosmetic plastic to see it. I'll pull the dishwasher out and take it apart, hopefully i remember how to put it back together. If you know where I can find info on a DW80k2021us Samsung how-to-replace inlet valve, kindly let me know :)
I don’t have a manual for this but if you document how you take it apart you should be fine. Slow and steady I’ve got faith in you! And I checked a quick google search, Samsung says it could be with water inflow or heater circuit.
Great video thank you
Thanks for sharing your video nice and clear and well explain and I think that you save me a lot of money too, regards and be safe now.
I’m glad it could help you out!!
Excellent video 📹
Do you have part number by any chance
This is what my dishwasher is doing. I select "normal" and press Start. It sounds like water is going in and then air comes out of the vent, but immediately switches to Auto and it blinks. I open the door and its empty inside. I tried reset and that did not work. I shut off the electrical for 5min and that did not work. Do you think its the thermistor? I hope you reply because it will save me money :)
If the auto and the normal light are blinking together then most likely this is your problem . I believe this is Samsungs built in fault indicator that something is wrong with that circuit. The thermistor is the most likely component. The thermistor is pretty cheap if I recall.
@@hc7760 Thank you for your reply. Its only the Auto light that blinks. When I checked the user manual it says its lack of water issue. My hot water valve under the sink is on so my guess is that its the inlet valve. Problem is I cannot see it at the bottom front of the dishwasher so it must be at the back, too much cosmetic plastic to see it. I'll pull the dishwasher out and take it apart, hopefully i remember how to put it back together. If you know where I can find info on a DW80k2021us Samsung how-to-replace inlet valve, kindly let me know :)
I don’t have a manual for this but if you document how you take it apart you should be fine. Slow and steady I’ve got faith in you! And I checked a quick google search, Samsung says it could be with water inflow or heater circuit.
@@hc7760 Thanks again! I'll see how it goes and will let you know what happens. It might take days.
Thanks for keeping me updated. Just make sure you turn your water valve back on from under the sink. That’s where they are typically located