Tevo Nereus 3D Printer Unboxing & Review. Best 3D Printer Under $500 2019?

Whats shaking homies so today I am taking a look at an awesome 3D printer from Tevo. This is the Tevo Nereus 3D printer. In this video I do a full unboxing and review of this 3d printer I also show test prints and go into full detail on this printer. This 3D printer can print over wifi with an app on your phone as well as over sd card or plugged into computer. This is a very large 3D printer with a 320x320x400mm build volume. This printer also has a filiment run out sensor, as well as a LCD touch screen display. To pick this printer up you can get it here . www.gearbest.c... www.banggood.c... www.amazon.com... Or get it through TEVO Official Store here s.click.aliexpr...
If you want one a little smaller and cheaper check out the tevo tarantula pro here www.gearbest.c... www.amazon.com... I hope you guys like the video and thanks for watching.
MY GEAR
CAMERA - www.amazon.com...
YOYO - www.amazon.com...
BEST CHEAP 3D Printer - www.gearbest.c...
LAPTOP - www.amazon.com...
LIGHTS - www.amazon.com...
TRIPOD - www.amazon.com...
ACTION CAMERA www.amazon.com...
SOFTWARE - www.amazon.com...
Official Magic YoYo Team Member
Official Team Member ZipLine Strings
Tweet at me on twitter @kowalskiDylan
snapchat- hotdiggidy
facebook- / hotdoggidy
instagram - hotdiggity86
psn- hotdiggidy
For a free ride on UBER use code. Dylank2537ue
#tevo3d #3dprinting #3dprinter #yoyo #unboxing #magicyoyo #balisong #butterflyknife #todaysthrow #DIY #Cooking #kutt #knifeporn #kitchen #yoyotricks #top10 #hotdiggidy #sbn

[@kevinnightmareszzz6140]

Damn I'm impressed by the picture of your sister and brother and law with their child, Looks great

[@DylanKowalski123]

+Kevin nightmareszzz i know right

[@ItsMeMattCarter]

Great video, you got a new sub and you sold me on buying one for my 3d printing company. I use a CR10 right now for the main printer but this might be replacing it. I bet I end up with a couple of these. I mean I can get this on Amazon with prime with the auto bed level kit installed (BL touch) for $351.

[@asapGooby]

How's it working for you?

[@marcoreviews]

The dual cooling nozzle is always amazing on these printers. I bought the Tevo and am thinking of getting this one as well... not sure about the software on that touch screen. I really like the software setup on the Alfawise U30... Wonder if making a hybrid printer would work.

[@painda1542]

Hi just got your signature yoyo I love it

[@colinfielder6695]

OK OK Dylan your knowledge of a flick knife is scary I will buy one OK!.....But seriously love the prints, the Lithophane is one of my favorite prints too! I have a couple of Creality printers and a Anycubic i3 mega, my latest is an Artillery Sidewinder X1 because I wanted to try a Direct drive but this video is really persuasive towards Tevo! well done.

[@johnedwardkang772]

Hi. I like the printer in the video and I am thinking about getting one. What slicer are you using for this printer? I know how to use Cura, but this printer is not in it.

[@MPPFonseca]

I have a Tevo Nereus .In the middle of printing the filament is over. I made a exchange, but what should I press for printing to continue?

[@DiavloPL]

And now I have a problem, was just about to order sidewinder x1, but now I have problem. I saw in comments that you say it prints better even with direct extruder in sidewinder. Any chances for direct comparision?

[@DylanKowalski123]

+DiavloPL yeah maybe i could do that

[@ohzinazad4138]

@@DylanKowalski123 so any chance on this vid? because i cant find a comparison no where so you would be the first :D

[@JoeyandAbby]

Yo Big D what do you like to make with those printers?

[@ShiryouOni]

You had amazing results, I've had mine for about a year and it's been nothing but frustration and every print is worse than the last. Tevo still hasn't even uploaded the firmware to the website.

[@DylanKowalski123]

+Rain Spider sounds like you have mechanical issues makes sure all belts and eccentric nuts are tight

[@njbrown1191]

How would you compare this to Sidewinder X-1?

[@DylanKowalski123]

+Nick Brown this one prints better. Sidewinder has cool leds and looks cooler

[@QankoIvanov]

You must buy the Petri. It's good yoyo to have in your collection bro.

[@aliahsantarek8113]

Like it👍👍

[@DylanKowalski123]

+Tarek Tahsin yeah I love it

[@djsynthvirus8507]

anyone know the difference between this and the tornado? I dont even see the nereus on tevos website. did they drop the tornado name after the problems and go with nereus?

[@DylanKowalski123]

+Dj SynthVirus there is wuite a few differences

[@antscape]

Is that Amazon link the only working link for this model currently?..I found another link but the comments are linked to the tarantula..

[@DylanKowalski123]

+Ants Cape ill update it asap

[@oscarmq6200]

I have a brand new one for sale

[@Layingthelaw100]

@@oscarmq6200 is it still for sale

[@maryhuff1760]

Hey

[@DylanKowalski123]

+Mary Huff hey

[@btfisher1162]

You need a ender 3 pro

[@DanMoridin]

Do NOT buy a tevo product!
I have been dealing with these jokers since December 2017.
They send out bunk printers then blame the user for any and all issues.
My uncle's hot end just went out and he is having a hell of a time getting a simple replacement part.
I myself had issues just getting them to send me out a printbed that actually works.
Took me about 3 months just to get a working printer.
They rebranded to "Homers" and since then their customer service got worse, not better, which is saying something.
Didn't know they could even get worse than they already were!

[@painda1542]

Hi just got your signature yoyo I love it

[@DylanKowalski123]

+Painda awesome glad you like it