How to sand and polish aluminum with a speed sanding technique

Поделиться
HTML-код
  • Опубликовано: 12 дек 2024

Комментарии • 71

  • @vunit8213
    @vunit8213 Год назад +1

    By far one of the best and my personal favorite process to polish aluminum 👍🏼

  • @lovebuggs1425
    @lovebuggs1425 11 месяцев назад

    I just started a new service of my company of polishing, and I appreciate the tips in your videos amd watch you're videos on Facebook!

  • @lyndsaysworici
    @lyndsaysworici 6 лет назад +2

    YES !!!! it's in this direction that I do my sanding work and it changes absolutely everything !!!

    • @koboriginals7085
      @koboriginals7085  6 лет назад +1

      Awsome!!! Amazing how little tweeks can change everything !

  • @buckeyestatepressurewash6252
    @buckeyestatepressurewash6252 3 года назад +2

    What kinda 320 and 600 sanding pads do you use ? Trying to sand 6061 aluminum edges to match after flap disc reduction of welds. I tried 120 to 240. Didn’t give me good results. Nice video. Following now

  • @RobertLeBlanc-kz6bk
    @RobertLeBlanc-kz6bk 6 месяцев назад

    Question ? What grit best to use to get paint off of the pontoon first. Previous owner painted them

  • @BrandonChrisco
    @BrandonChrisco Год назад

    Hope much pressure do you add while you're doing each stage

  • @robertwright3001
    @robertwright3001 2 года назад

    Nice! Straight to the point. Great job man.

  • @gbeksel
    @gbeksel 5 лет назад +4

    Got a couple of questions...1. What rpms are you sanding at? 2. Is when you put your pad flat on the metal.....how are you keeping it from walking away in a circular pattern? I have had that happen to me before

    • @koboriginals7085
      @koboriginals7085  5 лет назад +1

      I am going to make a video on details of speed sanding

    • @angelamacisaac1895
      @angelamacisaac1895 2 года назад

      Hello! I’m relieved to see I’m not the only one struggling with the blending. I’ve searched through here, IG and the website. If anyone has found more on the speed sanding can you please point me to it?
      Also that “mini makita” has me a little obsessed. It looks smaller (and hopefully lighter weight) than mine and the other models I’ve seen online.

  • @jeremiahfisher6994
    @jeremiahfisher6994 5 лет назад

    I just got into sanding I love it hard work but I love it. Trying to figure out how to speed sand now I know. I'll apply what I learned here Sunday! Thank you sir

    • @koboriginals7085
      @koboriginals7085  5 лет назад

      awesome happy to help! thanks for the love and support!

  • @gbeksel
    @gbeksel 4 года назад +2

    What kind of makita is that? It looks lightweight and very agile for speed sanding....I'm using my bigger polisher and its kind of bulky in comparison to that tool you use.

  • @markboon8353
    @markboon8353 2 года назад

    Great work

  • @MrMickeym0use
    @MrMickeym0use 8 месяцев назад

    Hi do you have the model number of the mini makita ???? thanks .....keep the vids coming

  • @DavidSawer-ce7fi
    @DavidSawer-ce7fi Год назад

    Hey I am guessing this is followed up with a multi stage polishing??

  • @marrkkkkk6124
    @marrkkkkk6124 2 года назад

    Eh howzit! I follow your steps. It came out mirror shiny but you can see the sand marks scratches. How do you get it off or can I even get it off?

  • @RichardEwoldt-sb9if
    @RichardEwoldt-sb9if 5 месяцев назад

    How many rpm does your sander run?

  • @Krivo47
    @Krivo47 2 года назад

    Huge help!! Thank you so much!!

  • @jponyboyace
    @jponyboyace 2 года назад

    On a pontoon how does this work….thanks🎉

  • @jponyboyace
    @jponyboyace 2 года назад

    Are you removing any pits?

  • @matthewpolishing7294
    @matthewpolishing7294 3 года назад

    Do you follow up with a dual action sander or do you cut it out like that

  • @fabrisiorivera6129
    @fabrisiorivera6129 2 года назад

    I swear I’m going to meet you one day in person 💪🏽 I’ve started my own business and staying busy off of watching you and one other guy

  • @DailyVillainy
    @DailyVillainy 6 месяцев назад

    you sir are a G

  • @susanwinslow
    @susanwinslow 3 года назад

    I’d like to sand and shine my electric frypan. How can I do this on an item with tight curves and 90-degree angles?
    Thanks.

  • @jeremyduran8256
    @jeremyduran8256 6 лет назад

    Great video tons of help

  • @emersonbarahona579
    @emersonbarahona579 3 года назад

    Im a beginner polisher, which machine can I used for sanding dual action or rotary?

  • @brankostanojlovic9799
    @brankostanojlovic9799 2 года назад

    Show us how you do mirror on stainless

  • @louisvena9668
    @louisvena9668 8 месяцев назад

    How can I get a scratch out of aluminum pontoon

  • @TheChevyman1012
    @TheChevyman1012 3 года назад

    What grits are u using and type of sand paper

  • @Kid617
    @Kid617 4 года назад

    Have u done a video of polishing diamond plate

  • @jamiemula4174
    @jamiemula4174 3 года назад

    What speed on the sander

  • @michaelbrasco
    @michaelbrasco Год назад

    Your first step which you call a cut. What kind of sandpaper are you using, 1000 grade?

  • @oatway_trucker3663
    @oatway_trucker3663 3 года назад

    Just like and subscribed, please put up some more videos 👍

  • @jeremyduran8256
    @jeremyduran8256 6 лет назад

    So if I need to remove heavy defects I would do the same cut and smooth process but with lower grit correct?

    • @koboriginals7085
      @koboriginals7085  6 лет назад +2

      Yes you can pick your grits accordingly. I would advise if you go down to a 220 or 120 that you cut and smoth those grits our really well with 320.

    • @jeremyduran8256
      @jeremyduran8256 6 лет назад

      King Bling 👍🏽 thank you

  • @devanessner
    @devanessner 5 лет назад +1

    Awesome work, what machine is that? Been looking for something better than the big variable speed buffer to sand....also if you get some time can you make a video of getting out striping aka burn marks on aluminum and/or stainless

    • @koboriginals7085
      @koboriginals7085  5 лет назад +2

      Follow me on Instagram at king of bling originals I have the model number posted there I will try to make a video on burning thanks for the love and support

  • @Dustin-rb8mp
    @Dustin-rb8mp 5 лет назад

    I have some heavily pitted and salt damaged wheels on my semi truck. It's super hard to get all the pits out. I've used a grinder, polisher, and random orbital to sand and I can never get all the pits. Any tips or tricks?

    • @koboriginals7085
      @koboriginals7085  5 лет назад

      Hey best to I can give is dont get frustrated trying to remove every pit as you can not. I have seen a pic of your wheels on Instagram. I have done many wheels like yours and you will never get those Mark's out. You can make them shine but you will see it through your shine. Unfortunately the wheels are too far gone

    • @Dustin-rb8mp
      @Dustin-rb8mp 5 лет назад

      Ok, thanks man. I'll keep practicing and see what I can do. Keep make videos they are a big help.

  • @keithzastrow
    @keithzastrow 2 года назад

    I want to do this to my pontoon boat but just worry about how thing those aluminum pontoons may be......

  • @honestinsincerity2270
    @honestinsincerity2270 5 лет назад

    Just started tryin to sand/polish some aluminum plates and, for the life of me, I can’t get rid of the cloudiness even when progressing from 240 to 3000 grit and then using something like mothers mag. I know I’m doing something wrong but I just can’t get it. Guess I just need more than a few days worth of practice

    • @koboriginals7085
      @koboriginals7085  5 лет назад

      Your first problem is trying to sand aluminum then cut it with mothers! You need to buy something more advanced

    • @koboriginals7085
      @koboriginals7085  5 лет назад

      Mothers is not the best polish for aluminum to begin with. You should be using rouge bars with cutting wheels if your sanding and polishing

    • @honestinsincerity2270
      @honestinsincerity2270 5 лет назад

      @@koboriginals7085 Yeah, thru a buncha trials, that's the same conclusion I've come to actually. I thought I could do it like that Skills & Trade guy on RUclips who makes it look so easy and doable with just sand paper. But he must be some wizard or something cause everyone else is using cutting and buffing compounds with wheels. Now I just need to get those wheels and rouge I suppose.
      Thank you for the info and video though!

  • @hardtruckin1
    @hardtruckin1 3 года назад

    How do you hold a rotary flat on a curved surface without it spinning it straight off the metal??
    Also why is the replay speed sped up ??
    I’ve been trying to learn this for 12 months and my rotary with an interface pad on it never leaves a finish like that

  • @richardweyland116
    @richardweyland116 4 года назад

    How about how to finish rough edges on cut aluminum?

  • @BackyardBroadheads
    @BackyardBroadheads 2 года назад

    How dangerous is the aluminum dust from sanding?

    • @themarcel6.6
      @themarcel6.6 Год назад

      Not a bad thing for people who do it like a few times, but if this is your profession you need to have respirators and all that ppe

  • @markhutchinson4222
    @markhutchinson4222 5 лет назад

    Were do u get your backing pad from

  • @markhutchinson4222
    @markhutchinson4222 5 лет назад +1

    What rpm

  • @420KingKottonmouth
    @420KingKottonmouth 2 года назад

    Great tips, but could've gone without the background music as it was hard to hear everything

  • @felixf5211
    @felixf5211 4 года назад +1

    What is the model number of the Makita buffer?

  • @keithzastrow
    @keithzastrow 2 года назад

    Guessing 320 is NOT coarse enough for some jobs....especially if you have scratches you need to sand out. Thinking 180 first for those eh?

  • @Nick4b11
    @Nick4b11 10 месяцев назад

    Good job not telling us what kind of sand paper to cut with 😂

  • @JP-og2wt
    @JP-og2wt 6 лет назад

    Thanks so much. I use DA. With this info I’ll try high speed. 🤘

    • @koboriginals7085
      @koboriginals7085  6 лет назад

      Awsome!!!! Let us know how it go's !!!!

    • @JP-og2wt
      @JP-og2wt 6 лет назад

      King Bling 🤘

    • @JP-og2wt
      @JP-og2wt 6 лет назад

      King Bling will do. Hey what’s the backing plate you are using? Mine is pretty solid and doesn’t seem to conform to to roundness of the tank like yours

    • @koboriginals7085
      @koboriginals7085  6 лет назад +1

      @@JP-og2wt you need whats called a interface pad. Its a foam pad with hook and loop on it.

  • @matthewpolishing7294
    @matthewpolishing7294 2 года назад

    You don't use a da king of being after the rotary

  • @feur2884
    @feur2884 5 лет назад

    Diamond plate steps

  • @iwantyayo
    @iwantyayo 5 лет назад +2

    Mask? Safety first brotha, great video tho