The best vinyl wrap?
HTML-код
- Опубликовано: 8 сен 2024
- In this video I break down the difference between avery Dennison, kpmf, Hexis, flexishield, inozetek, cheetah wrap and 3M. Note these are my opinions based on my own experience. You may not agree and that’s fine. My goal was to be as thorough and transparent as possible. As always if you have questions you can reach out to me directly!
Great video. I wrapped my car in Vivid the first time in Matte mustard yellow. I think it came out good for my first time. I did have alittle difficulty being my first time. The vinyl did seem kinda thick. I’m gonna redo it because of some rookie mistakes and my top is fading. I live in Texas. Everything else came out well. I assume choosing 3M, Avery, or KPMF (matte sonic yellow pearl most likely) , it will be a much easier install. Would you agree those are easier to work with than Vivid matte?
I subbed because this is top notch content right'chea!
I need to find a vinyl that is extremely sticky! Or at least much stickier than VVivid....I bought the Vvivid vinyl with 1 inch width from Amazon and to use it by placing strips of it on my wheels. I put it on, used a heat gun since the outside air temp was about 5o degrees and went inside. Come out an hour later and some of the strips were just hanging there and flopping in the wind! WTF? Even after using a heat gun! How frustrating this is! And yes I cleaned them with soapy water, dried them and then used alcohol to make sure they were ready for vinyl.....
Cool.
Great job 👍🏻
I really like the distinction between the chinese films being 2 adhesives, 2 liners, one film. Almost all chinese vinyl feels the same, they just smell different from the change in adhesive. I honestly prefer teckwraps higher tack to inozeteks low-no tack. High tack is there to counteract high tension from thick and ever shrinking film, removing the tack from the equation like inozetek does actually hurt my install. No wonder they tell you they wont warranty anything that has more than 1-2% stretch on it, it literally can't handle it
Yeah. I can’t say this is 100% fact but I’m usually pretty empirical and based on my experience it would seem this is the. The Chinese films are a tough sell for me because I always tell people it’s just not going to last as long. People are rarely willing to sacrifice longevity
Have u ever tried arlon PCC gloss black? Much better than 3M.
3M too has made a new gloss black called high gloss black with cap sheet and super gloss finish
Hi. Thank you for the video very interesting. I'm just wondering if it is 3M Wrap Film 2080-S335 Satin Bitter Yellow that's behind you or else ?
Avery satin energetic yellow
what is the color on the tesla behind you?
What about VinylFrog?