Great, thank you so much!! Found a $17 screen on ebay and with your tutorial, I was back up a running a week after my dog chewed my screen. Took about 1.25hrs to fix, but I didn't bother with the water proofing and taping, well, because my cheap kit didn't have any of that. Thanks!!
Wow!! I cant believe i actually did it. ALTHOUGH… i did get confused at the part where you said “Unless you have an oem/refurbished screen, skip to 3:54”. If anyone has an aftermarket screen, do NOT jump to 3:54. Stay on task and remove that metal plate from the stock screen and place it on the new aftermarket screen. Boom.
Hello, I recently did this but didn’t put any tape on, my screen is noticeably unresponsive a lot of the time when typing, (for example this took twice as long to type as I needed to press the keys down for longer for the display to recognise I was touching the keys) and I have a hard time trying to swipe the control panel up, it seems like the bottom quarter of my screen is much worse than the rest, can someone explain this? I’ve heard something about grounding but im not sure what that us exactly?
Thank you sooo much for your video- I have changed my daughter's phone screen with this tutorial and it works again! Although I was able to figure it out- I wish you'd mentioned in the video that some of the screws would be of different lengths and to take note of it while removing them- but otherwise fantastic!!!
Hello, great video! I’ve got one question: can i repair se 2020 screen by changing it to iphone 8 screen? And also program true tone on iphone 8 screen from se 2020 screen?
@@RealWorldReview *how much money would that cost to change an iPhone SE from the black display to a white bezel display? 🤷🏻♂️*
3 года назад
@@C.Dynamo A display assembly costs less than $25 shipped. But the home button color is unchanged if you want to keep TouchID -- only the original button supports TouchID. Also, aftermarket displays don't support TrueTone unless you also have access to the original display AND own a reprogrammer (but 1. any half decent shop should be able to lend you a programmer, or do it for you, and 2. truetone is useless imo)
If a iphone is dropped and it’s screen doesn’t break a ribbon cable might become dislodged. I have slight brightness on the screen but no picture. I haven’t tried opening it yet but I think that it might have a loose connection. It still makes sounds when connected to the charger. If dropped a couple of feet to the floor.
Thank you. I was able to use this to replace my daughters screen. I did have one problem though. The metal bracket that screws down over the battery, screen and home button connectors was somehow causing the screen to become unresponsive. My guess is it was jarring the connectors under it when screwed down. After trying a couple times to reseat the connectors with no luck I just removed that bracket and reseated the connectors. Then I sealed the phone back up and it works perfectly.
Your home button will not work. It's paired to your phone and no other phone. So even with an original screen you will need to transfer the home button
Not the end of the world. Your phone is not water resistant and this will not bring that back 100%. It does help hold the screen down, but if most of the adhesive is still stuck on the phone, replacing this isn't required, just recommended. If you're a business replacing a customers screen, then you need to do this.
I assume that as with other models below this one, so series 7 and below, the home button no longer works properly and you need to enable the on-screen sensor, right?
Thank you for the easy and clear video. Took me good 1 hour to replace the screen. Too bad Apple makes it inpossible to replace parts without losing the iPhone options like in this case True Tone.
@Spawsy_ so long as you keep original home button, yes it will. You cannot use touch id with another home button, it has the be the original (linked to logic board)
I'm having difficulties getting one of the screws out. It's the above the home button. I used all the small screwdrivers I have, and it still won't come out. Do you have any suggestions?
while I'm changing the display, camera sensor just disconnected but the power goes on. The problem is it gets really hot when it turns on like 10 seconds after turn on, the bottom parts of the camera gets like 60 degree
Late watcher but love the video and am extremely thankful! I’ve seen on newer phones technicians reprogram or “clone” the old screen to the new using a specific programming tool. Do I need to do that for an SE screen replacement?
Will my screen work without the Kapton tape? Or will it be all screwy? My screen fix kit does not come with any Kapton tape, double sided, or that lovely blue layer you mentioned helps water resistance.
My screen didn't even have the removable shield, but regardless I left the red protective film on and it's working just fine, with a cheap aftermarket screen. The quality is reasonable, you can tell the colours are more dull compared the original but otherwise it's ok.
started at 7:08 pm ended (?) at 12:44 am reason ? i accidentally stripped two screws and struggled for 3 hours. i kept losing the teeny tiny screws and i currebtly have lost two also question, whenever i plug in the camera it somehow starts being hot ? why is that ?
Question I just got my iPhone se screen replaced but for some odd reason my phone is very laggy now and it’s getting hot something it didn’t do before wat could it be I was told he changed my screen and some sort of censer could it be bc of the censor?
@@cheezeboyz2549 update still have it got my money back and kept the shitty screen since I called them out and almost got them fired since they didn’t even use the right screen ._.
I finished the repair step by step and my display is not turning on. The phone still functions because I can type in my password and connect airpods but the display is just black. I even tried swapping it out with my old screen and still nothing. I am not sure what to do.
That was a super helpful walk through. I'm an engineer but have never worked on phones and you explained it more than adequately. I have a question though regarding the touch ID which is now unavailable, not a problem having to tap in the code but the button doesn't work at all. I've rechecked the connections and I was very careful with the cable, and ideas? Thanks again for the video.
Did you replace the home button with the screen? Because the original home button is paired with the phone and if you replace it, it will disable the Touch ID, so if you still have the old screen, remove the home button from it and put it in the place of the replacement one on the new screen and hopefully that should fix it 👍
@@MrCrispyNips04 Thank you very much for replying, I used the original button but what I stupidly done was tore the ribbon cable very slightly. I didn't realize how fragile they are. I ended up giving up on it as I was given a second hand phone.
heyo idk if you'd respond back or anyone but when recently phone fell face flat first with phone cracking a bit but main issue is the screen coming off while trying to put the display cable and the other one next to it my phone hadn't been able to turn on display wise any ideas?
Thanks for video, I am getting a constant tapping sound when recording video after I replaced screen, have you heard of this and a possible fix? I tried restarting, software update, and turning off cellular/Bluetooth. It doesn’t tap if recording audio only.
why do you use the sticky tape in that bit? I didn't use that and my screen was fine for a day or two then started having a mind of its own and randomly tapping uncontrollably-is this a bad connection, bad screen or the sticky tape issue?
Sounds like a defective screen. The tape is for super aftermarket screens that have grounding issues. Most companies fixed it, but some are still cheap. Try to return the part
When I am putting a refubricated glass, should I use any glue? Because you are not putting there any. Also does everything work correctly after replacing, even truetone etc.?
I recommend using the screen adhesive if there is some, like what the phone comes with. Don’t use glue/super glue! True Tone and auto brightness don’t work (generally) if you don’t program the new screen with a programmer.
This video is great. Too bad I’m a clumsy idiot. I was repairing the phone, did everything perfectly. No complications putting on the screen or taking out the Touch ID. I plugged in the flex cables and went to test the screen, plugged in the phone to the charger, and when I turned to grab something, my foot got caught on the charger and ripped the phone off the desk. Two of the flex cables snapped. I have to buy another new screen now.
Hey, specific question and I'm not sure if it's the replacement screen I got or the way I installed it, but after installing the new screen it doesn't track swiping on the left side of the screen at all. Once I swipe about halfway the phone acts as if I just took my finger off the screen. I can't even turn fully turn off the phone cause I have to swipe starting on the left side to do that. Do you know of something I could have messed up during the installation process?
This is an important question. Do your SE show “Important Message” after replaced your original display to they new one? I’m wondering since the current iPhone will show it after being replaced by third party.
Yes, it prevents grounding which can cause the touch to not work properly. This only applies to aftermarket screens (you should be fine without the tape with OEM, FOG, or In-Cell screens)
Question my screen shattered and now my rear camera doesn’t work its not damaged at all but for some reason when I open to take a photo it stays at a black screen unless I use the front camera would a screen replacement fix this or something else might need replacing?
I was able to replace my screen but when I try to use my Touch ID on the home button, the display on the screen shakes up and down and doesn't recognize my fingerprint. Is there a step I did wrong or forgot to do. (The home button works if I just press it) Thanks for the informative video.
@@RealWorldReview or just don’t turn on Touch ID??? Plus what would apple even do with people fingerprints, sell them to people who need new ones or smthn idek
@@RealWorldReview There are people who can repair them. Depends on where it broke. People have successfully repaired snapped ribbons 100%..probably for a lot less than Apple charge for a new screen assembly too! Lol.
Replaced my 2020 se with an iphone 8 screen. But after that, wifi no longer works. It is connected thought, just can't connect to internet. No idea how to fix.
Couldn't even do step one. One of the screws by my charging port won't unscrew (the top is damaged and not a star shape anymore). Guess I'm screwed. Get it?
@@costalopes1000o criador do vídeo usou a tela do iPhone 8 mas o true tone e brilho automático tem que ser reprogramados para funcionar. Isso é com tudas as telas pelo que entendi
Sounds like it was plugged in with the battery plugged in. Sounds like something shorted out. If that's not the case, then there might be some damage to that cable or some liquid damage. Although it could be anything really
Yeah, I cant type or press the left side, well Getting a new screen or LCD right? It cost $100 at ubreakIfixit, do you know where I can buy a new screen for iphone SE 2020, USA? Any recommendation
I little bit of alcohol like a little bit dropped on my top speaker at now it sounds so bad I can’t really clean it now how the hell I clean it without opening it
This seems to be beyond the complexity level allowed by my brain processing power constraints. How do I elevate my brain power, do I get a Mac Pro first?
Polyimide/kapton tape, and it helps with grounding issues causing the touch screen to fail on aftermarket screens. Depends on the quality of the screen
@@RealWorldReview Thanks. Does it have some sort of most common size? My local parts shop offer tapes in sizes ranging from 3mm wide to 50mm wide. Iwould prefer most useful size so I can use it on as many ocasions as possible :)
Hi, the screen works perfectly! However, the front camera doesn’t work. I find this very weird because the light sensor and speaker is working. Please help.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Great, thank you so much!! Found a $17 screen on ebay and with your tutorial, I was back up a running a week after my dog chewed my screen. Took about 1.25hrs to fix, but I didn't bother with the water proofing and taping, well, because my cheap kit didn't have any of that. Thanks!!
you should install the seal because dirt will find its way inside and thats not good
Alternatively you can use b7000 which is what I use, and keep it clamped for a while until the glue dries @@dendys04
Wow!! I cant believe i actually did it. ALTHOUGH… i did get confused at the part where you said “Unless you have an oem/refurbished screen, skip to 3:54”. If anyone has an aftermarket screen, do NOT jump to 3:54. Stay on task and remove that metal plate from the stock screen and place it on the new aftermarket screen. Boom.
Very basic and simple video which made the job very easy for me. 10/10
Thanks man! This tutorial was perfect! Quick and straight to the point! Fixed my phone in about 2 hours without issues! (I did lose one screw)
I always lose a screw 😂😂
I wouldn't worry about 1 screw haha. They're absolutely tiny
You saved me $90. Thank you. Even if i dont watch another video im subbed just so i can like your content as it comes through. Thanks again
hi ... Do you have tutorial for battery replacement? I check others tutorials and I rather follow you because your explanations are very clear.
aloha from hawaii, my kids found a smashed 2022 SE at the park and now $25 later and we are up and running 😂
Does it show a prompt similar to the iphone 11 when u replace the original screen with a third party display?
Yes, but it goes away after a week or 2
No prompt
Excellent video. Good speaking voice, no obnoxious music. Just subscribed. Thanks.
Just fixed my screen again for 2x. Thanks again for this video! Took about 1hr this time instead of the 1.25. I'm getting faster. LOL
Hello, I recently did this but didn’t put any tape on, my screen is noticeably unresponsive a lot of the time when typing, (for example this took twice as long to type as I needed to press the keys down for longer for the display to recognise I was touching the keys) and I have a hard time trying to swipe the control panel up, it seems like the bottom quarter of my screen is much worse than the rest, can someone explain this? I’ve heard something about grounding but im not sure what that us exactly?
That's the grounding issue. The kapton tape should fix that issue.
Thank you sooo much for your video- I have changed my daughter's phone screen with this tutorial and it works again! Although I was able to figure it out- I wish you'd mentioned in the video that some of the screws would be of different lengths and to take note of it while removing them- but otherwise fantastic!!!
This is lowkey a lot
facts
10-15 minutes if you know what you're doing. 30 minutes for the average person
Not really lol I actually like to repair stuff so stuff like this isn’t complicated for me😅
Not realy the iphone 8 and above are more complicated
?XD of this is alot then idk what to say bro
Hello, great video! I’ve got one question: can i repair se 2020 screen by changing it to iphone 8 screen? And also program true tone on iphone 8 screen from se 2020 screen?
Yes you can
@@RealWorldReview *how much money would that cost to change an iPhone SE from the black display to a white bezel display? 🤷🏻♂️*
@@C.Dynamo A display assembly costs less than $25 shipped. But the home button color is unchanged if you want to keep TouchID -- only the original button supports TouchID. Also, aftermarket displays don't support TrueTone unless you also have access to the original display AND own a reprogrammer (but 1. any half decent shop should be able to lend you a programmer, or do it for you, and 2. truetone is useless imo)
If a iphone is dropped and it’s screen doesn’t break a ribbon cable might become dislodged. I have slight brightness on the screen but no picture. I haven’t tried opening it yet but I think that it might have a loose connection. It still makes sounds when connected to the charger. If dropped a couple of feet to the floor.
how did u figure it out
?
Thank you. I was able to use this to replace my daughters screen. I did have one problem though. The metal bracket that screws down over the battery, screen and home button connectors was somehow causing the screen to become unresponsive. My guess is it was jarring the connectors under it when screwed down. After trying a couple times to reseat the connectors with no luck I just removed that bracket and reseated the connectors. Then I sealed the phone back up and it works perfectly.
Just fixed my Sons phone following your video. Fantastic content and great to follow 👍
omg you motivated me to think that my phone is completely broken but i don't think so
?
sorry he has mistranslated thank you for your help love :)))))))
I found my little brother phone that he hid because he broke it the whole front screen is falling off the phone. What do I do
Thank you for this video! It made it simple and easy to follow! What a breeze! Thank you!
can I reuse the metal panel @3:13 from the original? Buying a new screen has the option of including the metal panel or not.
Hi! Does true tone work after replacing the screen? I’m thinking on buying the yodoith screen kit. What do you think?
You will need a JC programmer to keep true tone.
If I have a screen from another phone then I don’t have to mess with home button or anything just disconnect screen then put the other on right?
Your home button will not work. It's paired to your phone and no other phone. So even with an original screen you will need to transfer the home button
How necessary would you say the adhesive at 4:54 is?
Not the end of the world. Your phone is not water resistant and this will not bring that back 100%. It does help hold the screen down, but if most of the adhesive is still stuck on the phone, replacing this isn't required, just recommended. If you're a business replacing a customers screen, then you need to do this.
@@RealWorldReviewhow about the kapton tape? I watched another video of the same repair and he didn’t use any.
@@ahmedyousof6288 if you have a bad aftermarket you'll need it to prevent grounding
Hey Matt, the screen is black after install, did I not connect the display plug correctly?
Yeah that would be my first guess
Just out of curiosity, would you be able to swap the screen with a white iPhone 8 screen?
Yes, but the home button. Will stay black
@@RealWorldReview what do you mean by this
If you change the home button, it will not work. If you use a JC or HX button replacement, home button will work but TouchID will not
make sure to bend away the battery cable it could make contact with the board and may cause a short.
I assume that as with other models below this one, so series 7 and below, the home button no longer works properly and you need to enable the on-screen sensor, right?
my new iphone 8 replacement screen for my se wont turn on, i only connected the wires to test it first might you know the problem?
Might be a defective display. Also you might need to plug in the charger to turn on the phone.
Thank you for the easy and clear video. Took me good 1 hour to replace the screen. Too bad Apple makes it inpossible to replace parts without losing the iPhone options like in this case True Tone.
Is the touchid works??
Yep
@Spawsy_ so long as you keep original home button, yes it will. You cannot use touch id with another home button, it has the be the original (linked to logic board)
Hello ! Do you know where i can buy the display and ser Of there delivery yo others countries?
I'm having difficulties getting one of the screws out. It's the above the home button. I used all the small screwdrivers I have, and it still won't come out. Do you have any suggestions?
Can you update the link for a screen you recommend buying? The current one is unavailable and when I search amazon I see mixed reviews.
while I'm changing the display, camera sensor just disconnected but the power goes on. The problem is it gets really hot when it turns on like 10 seconds after turn on, the bottom parts of the camera gets like 60 degree
Late watcher but love the video and am extremely thankful! I’ve seen on newer phones technicians reprogram or “clone” the old screen to the new using a specific programming tool. Do I need to do that for an SE screen replacement?
Yes and no. The programmer is only for true tone and auto brightness. If you dont use those, then you dont need it
Will my screen work without the Kapton tape? Or will it be all screwy? My screen fix kit does not come with any Kapton tape, double sided, or that lovely blue layer you mentioned helps water resistance.
My screen didn't even have the removable shield, but regardless I left the red protective film on and it's working just fine, with a cheap aftermarket screen. The quality is reasonable, you can tell the colours are more dull compared the original but otherwise it's ok.
started at 7:08 pm
ended (?) at 12:44 am
reason ? i accidentally stripped two screws and struggled for 3 hours. i kept losing the teeny tiny screws and i currebtly have lost two
also question, whenever i plug in the camera it somehow starts being hot ? why is that ?
did it lose true tone function after replacement? mine lost and I dont know how to fix it
If you don't program it, then true tone won't work. Personally I'm not a fan of the yellowing of the screen that feature does.
Real World Review And how do you program it?
With something like this amzn.to/36iBEvd
Question I just got my iPhone se screen replaced but for some odd reason my phone is very laggy now and it’s getting hot something it didn’t do before wat could it be I was told he changed my screen and some sort of censer could it be bc of the censor?
YES that’s a bad screen get a new one
@@cheezeboyz2549 update still have it got my money back and kept the shitty screen since I called them out and almost got them fired since they didn’t even use the right screen ._.
Where do you guys buys y’all’s Screens?
Amazon
How much cost would it be in rupees
@allo gloves lmao fr 🧝🏻♂️
I finished the repair step by step and my display is not turning on. The phone still functions because I can type in my password and connect airpods but the display is just black. I even tried swapping it out with my old screen and still nothing. I am not sure what to do.
great guide but annoyingly the 90-piece bit kit i bought didn't include the tri-point Y000 😑
Most screens come with tools included!?
Not always the adhesive though.
Place I bought it from came with neither!
That was a super helpful walk through. I'm an engineer but have never worked on phones and you explained it more than adequately. I have a question though regarding the touch ID which is now unavailable, not a problem having to tap in the code but the button doesn't work at all. I've rechecked the connections and I was very careful with the cable, and ideas? Thanks again for the video.
Did you replace the home button with the screen?
Because the original home button is paired with the phone and if you replace it, it will disable the Touch ID, so if you still have the old screen, remove the home button from it and put it in the place of the replacement one on the new screen and hopefully that should fix it 👍
@@MrCrispyNips04 Thank you very much for replying, I used the original button but what I stupidly done was tore the ribbon cable very slightly. I didn't realize how fragile they are. I ended up giving up on it as I was given a second hand phone.
I have a question do your iPhone reset after you changed your screen? I hope you understand me because my english is bad.
It will not reset the phone, you can use it like before, except you will lose true tone functionality unless you use a JC programmer
heyo idk if you'd respond back or anyone but when recently phone fell face flat first with phone cracking a bit but main issue is the screen coming off while trying to put the display cable and the other one next to it my phone hadn't been able to turn on display wise any ideas?
only issue has been the display cable and had someone fix my mistake on that, still struggling with it
Since you have removed the the black stick thing on the phone and replace it with that blue like transparent plastic, can it still resist water..?
I doubt it.
Thanks
Can we only change the touch part like not display or is it a complete fixed unit
It's a $30 part lol. Just change the entire display so you don't cause other issues.
Thanks for video, I am getting a constant tapping sound when recording video after I replaced screen, have you heard of this and a possible fix? I tried restarting, software update, and turning off cellular/Bluetooth. It doesn’t tap if recording audio only.
how much would this cost to get done professionally
60-100
why do you use the sticky tape in that bit? I didn't use that and my screen was fine for a day or two then started having a mind of its own and randomly tapping uncontrollably-is this a bad connection, bad screen or the sticky tape issue?
Sounds like a defective screen. The tape is for super aftermarket screens that have grounding issues. Most companies fixed it, but some are still cheap. Try to return the part
When I am putting a refubricated glass, should I use any glue? Because you are not putting there any. Also does everything work correctly after replacing, even truetone etc.?
I recommend using the screen adhesive if there is some, like what the phone comes with. Don’t use glue/super glue! True Tone and auto brightness don’t work (generally) if you don’t program the new screen with a programmer.
This video is great. Too bad I’m a clumsy idiot.
I was repairing the phone, did everything perfectly. No complications putting on the screen or taking out the Touch ID. I plugged in the flex cables and went to test the screen, plugged in the phone to the charger, and when I turned to grab something, my foot got caught on the charger and ripped the phone off the desk.
Two of the flex cables snapped. I have to buy another new screen now.
RIP LMAO
Hey, specific question and I'm not sure if it's the replacement screen I got or the way I installed it, but after installing the new screen it doesn't track swiping on the left side of the screen at all. Once I swipe about halfway the phone acts as if I just took my finger off the screen. I can't even turn fully turn off the phone cause I have to swipe starting on the left side to do that. Do you know of something I could have messed up during the installation process?
Faulty digitiser. You could also try adding kapton tape like the video suggested, otherwise you will need a replacement
is force touch activated if you put on an iphone 8 screen as you did or does it clash with the software?
No it doesn’t work
Do I need a heat gun or can I do it without this? As I don’t own one
No
@@RealWorldReview No as in, I can’t do it without a heat gun or No as in, I don’t need a heat gun????????
@@supersi9073you need a heat gun/heat plate
This looks very fiddly. How difficult is this to do for a first timer?
Easy just take your time and make sure you have all the tools need I'm going to do one my self waiting on the mail now
Thank you for making it easy!! I really thought I was going mess up.
This is an important question. Do your SE show “Important Message” after replaced your original display to they new one? I’m wondering since the current iPhone will show it after being replaced by third party.
Nope
Really? Almost every Technician RUclipsr told me so
@@andy0995 never seen that message on anything other than the 11/12s
I got my screen to work but it won’t allow touch… like I can’t press any buttons. What did I do wrong?
Do you need to use the tape? What exactly does it do?
Yes, it prevents grounding which can cause the touch to not work properly. This only applies to aftermarket screens (you should be fine without the tape with OEM, FOG, or In-Cell screens)
OMG.. It works.. I followed step by step.. and yeahhh.. I did my self...
Question my screen shattered and now my rear camera doesn’t work its not damaged at all but for some reason when I open to take a photo it stays at a black screen unless I use the front camera would a screen replacement fix this or something else might need replacing?
Replace the back camera. That’s the only way to fix it.
I was able to replace my screen but when I try to use my Touch ID on the home button, the display on the screen shakes up and down and doesn't recognize my fingerprint. Is there a step I did wrong or forgot to do. (The home button works if I just press it)
Thanks for the informative video.
You broke Touch ID and now your phone is worth like £100 less
Some people would love for Touch ID to not work so Apple cant have their fingerprints
It is possible you tore a little bit of the home button cable when removing. If so, it cannot be fixed.
@@RealWorldReview or just don’t turn on Touch ID??? Plus what would apple even do with people fingerprints, sell them to people who need new ones or smthn idek
@@RealWorldReview There are people who can repair them. Depends on where it broke. People have successfully repaired snapped ribbons 100%..probably for a lot less than Apple charge for a new screen assembly too! Lol.
Replaced my 2020 se with an iphone 8 screen. But after that, wifi no longer works. It is connected thought, just can't connect to internet. No idea how to fix.
Couldn't even do step one. One of the screws by my charging port won't unscrew (the top is damaged and not a star shape anymore). Guess I'm screwed. Get it?
Nice pun, sorry for the phone lol
dang...bro rlly worked his magic wit this phone
I just got mine fixed 2 days ago and cracked it again 😭
Did you reset your phone before screenreplacement ?
That can also sometimes happen if the phone housing is even slightly bent, it can put excess pressure on the screen glass. Fun fact lol.
you just saved me a couple hundred bucks, thank you so much! I subscribed =)
my screen the new one i just put in doesnt turn on bute my old one does (i cant ceep the old one it has red lines`)
If your homebutten is broken, can your touch id work when its New?
Impossible to get touchid without sending it to apple.
Ive change the screen but still won’t turn on do you think it may be a battery issue?
Bhai apka kya name h
And bhai aap apna se sell kr rhey ho kya
Try a USB tester to see if it takes power and charges. It should charge at around 5v 2A I believe
Is the kapton tape is a must for aftermarket screens and any aftermarket iphone 8 screen will work
Olá, a tela do iPhone 8 funciona no iPhone SE 2022?
@@costalopes1000o criador do vídeo usou a tela do iPhone 8 mas o true tone e brilho automático tem que ser reprogramados para funcionar. Isso é com tudas as telas pelo que entendi
Will it still work if you accidently snap the black strips
Lol no
When adding the camera cable back in it gets super hot and has an electrical burning smell, any ideas?
Sounds like it was plugged in with the battery plugged in. Sounds like something shorted out. If that's not the case, then there might be some damage to that cable or some liquid damage. Although it could be anything really
How can i remove the home button screws if they are stripped?
Might want to bring it to a professional if you don't know how to. The risk of damaging the home button is not worth messing with
So mine doesn't type well but the screen looks fine, no scratch, but I can't type the screen. What would be your suggestion?
Possibly bad digitizer. Needs a new screen
Yeah, I cant type or press the left side, well Getting a new screen or LCD right? It cost $100 at ubreakIfixit, do you know where I can buy a new screen for iphone SE 2020, USA? Any recommendation
I found one on Amazon cause the link on description is unavailable, not I just need some motivation lol
You got this lol just be careful around the home button area
The screws are stripped and I can't open it anymore 😭
I little bit of alcohol like a little bit dropped on my top speaker at now it sounds so bad I can’t really clean it now how the hell I clean it without opening it
Rubbing alcohol and a fine brush
This seems to be beyond the complexity level allowed by my brain processing power constraints. How do I elevate my brain power, do I get a Mac Pro first?
Great Video! Thank you!
I got a question why did you have to put the tape there and what sort of tape does it need to be
Polyimide/kapton tape, and it helps with grounding issues causing the touch screen to fail on aftermarket screens. Depends on the quality of the screen
Is it appear important battery/lcd message after changed it? Even though its original ?
No. That’s only on 11 and newer, with the SE being the exception
@@RealWorldReview ow any news on that so I can read it?
Btw thanks so much for the clear information !
Does it show the not genuine screen under the settings?
Nope. This is before they implemented that
I can confirm, there is no "non-genuine" message. But you will lose true tone.
I did miss the purpose of that Kapton tape. Can anyone explain, please? thanks
Help prevent grounding which causes touch issues.
@@RealWorldReview Thanks. Does it have some sort of most common size? My local parts shop offer tapes in sizes ranging from 3mm wide to 50mm wide. Iwould prefer most useful size so I can use it on as many ocasions as possible :)
Doesn't really matter because the roll will last you forever lol 7mm should be good though for the 1 repair
I replaced the screen and the LCD comes on. Just doesn't respond to touch.. :( any tips?
is everything on the phone going to be still there it’s a dumb question but i’m curious
yes unless you damaged your storage somehow
Yes, except for true tone, unless you program the screen.
Can the iphone 8 speaker phone be used for se 2 ?
If you mean the earpiece, then yes. My earpiece needed replacing and the seller said it's compatible with the 8 and SE 2020
Hi, the screen works perfectly! However, the front camera doesn’t work. I find this very weird because the light sensor and speaker is working. Please help.
Make sure the cable is seated properly, otherwise you may have torn the cable
What is the kapton for?
To prevent touch issues with aftermarket displays
Do you need to glue new screen?
Why didn’t they use the 8 screen in the SE 3 in the first place?
They do lol they just took out some metal and the 3D Touch pad
@@RealWorldReviewIf I buy an iphone 8 icloud ( locked ) to take its screen to use it for my iphone se 2022, will it perfectly work ? Compatible?
@@yassineamezough yes, but the back plates are a little different and would need to be swapped.
for the heat would a hairdryer work for the heat
Maybe because he isn't really needed
Why the tape at 3:37?
To prevent grounding and touch issues on aftermarket screens
Is necessary icopy to do this replament?
Not needed. You will not lose any functionality or get any warnings.
Can I switch the screen for an iPhone 6s? I saw they are almost the same size
Not even close
iPhone 8 screen works
Thank you man appreciate it very helpful video
What’s the tape for
awesome also it wont close all the way on the bottom right 😢
This video is great. I appreciate it dude. Helped a lot
What’s the tape for guys??