Configuring Dual WAN for Load Balancing on HUAWEI Router AR-6121 using Concept Policy-Based Routing

Поделиться
HTML-код
  • Опубликовано: 15 сен 2024
  • In this video I'll share with you my experience about how to Configuring Dual WAN for Load Balancing. WAN load balance and redundant Internet connections. Connect the ISP devices to the Router so that the ISP which is to be used for most traffic is connected to WAN1 and the other connects to WAN2.
    ---------------------------------------------------
    acl number 2000
    rule 5 permit soure any
    --------------------------------------------
    interface XGigabitEthernet0/0/0
    nat outbound 2000
    ip address dhcp-alloc
    interface GigabitEthernet0/0/2
    undo portswitch
    nat outbound 2000
    ip address dhcp-alloc
    --------------------------------------------
    acl number 3001
    rule 5 permit ip source 10.10.10.0 0.0.0.255
    acl number 3002
    rule 5 permit ip source 20.20.20.0 0.0.0.255
    --------------------------------------------
    traffic classifier c2 operator or
    if-match acl 3002
    traffic classifier c1 operator or
    if-match acl 3001
    --------------------------------------------
    traffic behavior b2
    redirect ip-nexthop 192.168.88.1 track nqa admin isp2
    redirect backup-nexthop 40.40.40.1 track nqa admin isp1
    traffic behavior b1
    redirect ip-nexthop 40.40.40.1 track nqa admin isp1
    redirect backup-nexthop 192.168.88.1 track nqa admin isp2
    traffic policy p1
    classifier c2 behavior b2 precedence 10
    classifier c1 behavior b1 precedence 15
    ---------------------------------------------
    nqa test-instance admin isp1
    test-type icmp
    destination-address ipv4 40.40.40.1
    frequency 15
    start now
    nqa test-instance admin isp2
    test-type icmp
    destination-address ipv4 192.168.88.1
    frequency 15
    start now
    ---------------------------------------------
    ip route-static 0.0.0.0 0.0.0.0 192.168.88.1
    ip route-static 0.0.0.0 0.0.0.0 40.40.40.1
    interface Vlanif100
    ip address 10.10.10.101 255.255.255.0
    traffic-policy p1 inbound
    dhcp select interface
    dhcp server excluded-ip-address 10.10.10.1 10.10.10.110
    dhcp server dns-list 8.8.8.8 1.1.1.1
    interface Vlanif200
    ip address 20.20.20.201 255.255.255.0
    traffic-policy p1 inbound
    dhcp select interface
    dhcp server excluded-ip-address 20.20.20.1 20.20.20.110
    dhcp server dns-list 1.1.1.1 8.8.8.8

Комментарии • 13

  • @Mettrofin
    @Mettrofin Месяц назад

    អរគុណណាស់បងសម្រាប់ចំណេះដឹងមួយនេះ។ ❤

  • @somsovannara1406
    @somsovannara1406 2 года назад +1

    thank you so much brother and i hope share more video about MPLS service

    • @smartkumar794
      @smartkumar794 Год назад

      Thank you ❤ please share a IPsec concept video

  • @simeaneng9193
    @simeaneng9193 3 года назад +1

    អគុណបងចំពោះកាលចែករំលែង

  • @sokhasokheng3483
    @sokhasokheng3483 2 года назад +1

    Thank so much bong!!

  • @khalilothman71
    @khalilothman71 2 года назад

    Thank you so much

  • @mengchhun2702
    @mengchhun2702 4 месяца назад

    please help show how to do smart link bong. thanks

  • @somsovannara1406
    @somsovannara1406 2 года назад +1

    Hello brother as I see and this lab is like master and slave right or load balancing ?

  • @rafiebabkir1137
    @rafiebabkir1137 2 года назад +1

    brother , are you providing huawei course track HCIP Datacom core & HCIP advnaced routig & Swicthing online ?

  • @piseth4502
    @piseth4502 Год назад

    Hello b mean teach ot b NH jong rean

  • @sengsovanchhey9482
    @sengsovanchhey9482 Год назад

    សួស្តីបងខ្ញុំអាចសុំTelegram បងមួយបានអត់?