Metal Shaping with Lazze: Bead Roller and Shrink/Stretch Combination. "Things that you can not do".
HTML-код
- Опубликовано: 26 сен 2024
- In this video Lazze demonstrates the proper metal shaping techniques that should be used to straighten an edge, which has been warped, after a pass through the bead roller.
For more information on Lazze’s books, Lazze’s metal shaping tools, DVD’s, and hands on classes at his location in California, visit www.lazzemetals....
I'm a self-taught, 63-year-old welder, machinist, sheet-metal fabricator, engine builder, chassis fabricator, wiring, and . . . the list goes on, for over 30 years; however, I learn something new e_v_e_r_y time I watch one of your videos. In many cases, you validate my own experiences and discoveries. I find it amusing that I feel the need to wander out to the shop after one of your tutorials. I am so envious of your vast knowledge. It will be a fascinating journey to embark upon full time once I retire, but I need a lot more tools than I have - and I have a fair amount now.
You if you tinker, you will never really retire. There is always something to do.
Azzx. 😘😘😘😙}:‑):-$:-|:-|:-(:-$:‑X:-\:‑X:‑X:-\:‑X:-\:-(:-(:-[=_=>..
Isn't it ironic, that when we retire, then we get to do what we truly love? I've spent a fortune on tools and I sometimes look at them and it upsets me to think that someone else will own them one day. They're mine, I have worn them, ground them and polished them to suit how I alone work. Unlikely they will be any use to someone else.
You make it look so easy! That’s called skills. Thanks for sharing your craftsmanship 👏
As always ,fantastic tips and advise .I watch you videos over and over again.Thank you .Mark.
Bra jobbat, Lazze! Gött att se nån som vet vad de håller på med!
You sir are an absolute artist!
Brilliant bits of kit. Apart from the English wheel, I had to shrink using oxy/A when I learnt the trade.
It's good to see you in action again Lazzie.
Very helpful tip.. prob save alot of material & time watching this.. thank you!
Thanks Lazze. This tip is exactly what I needed at exactly the time I needed it.!
Great lesson. Thank you.
Love your videos. Thank you for sharing your knowledge with us.
Good video. Thank you.
Seus vídeos são muito bom,sempre assisto
Can I buy one of those rollers. That's a nice unit love the side rack for the dies
I thought the bottom bearing for the lower die was interesting on his bead roller. I like the dies too.
thank you for your video and your advice. (from france)
You are THE MAN! GREAT STUFF!
I always learn something new when I watch your videos.
Thank you for the education. :-)
What if you re-run the bead through the roller after the no-no’s?
Loving the videos, would like to see more come from your channel but I'm sure with your school and other things it can be hard to put time in youtube.
I was looking around about bead rolling tubes for turbo connections. It seems like I seen a video where someone was bead rolling the tube ends so the sleeves would hold better. Is this a real thing or something I dreamed late one night with my laptop on?
thanks that did help
Lazze please subtitle in castillian. Saludos desde ECUADOR
colar banding machine price
I have thought I was really good with sheet metal, but now, I can see that I was fooling myself.
nic machin i want use this to mak silver pts very help ful
Just amazing...thank you. I'm starting to learn, this way, I can build my own gas tank for my project bikes. Is there a place in San Jose,CA area where I can rent these tools( roller, shrinker, stretching machine etc?)
Lazze, I love watching your videos and your knowledge of metal shaping astounds me so I have to ask you this one question. Can the complex bends and curves of the gutter/weatherstrip groove under the upper corners of the trunk opening on for instance a 1963 ford be made with a bead roller? I have to replace the panel from the bottom of the back glass to under the trunk including the corners. Ken.
Du har väldigt lärorika videos! Säljer du verktyg/maskiner till/i sverige med?
Canto cuesta, envíos al Peru
You are ageniou!
Manda para Brasíl?
BEM QUE ESSES VÍDEOS PODERIAM SER EM PORTUGUÊS , UMA PENA .
Hallo, sehr interessant leider nur eine Sprache. Deutschland
send me
your old equipment
NEVER forget to tell, that the "shrinker & stretcher" you use for demonstration, was invented & patented by a German Factory !!!
👍
Вай! Зиг-машинка! 👏
Infelizmente em nosso pais, ou seja, aqui no Brasil não temos empresas que produzam equipamentos com tamanha eficiência, por isso ficamos namorando tais equipamentos vídeos. este equipamento é meu sonho de consumo. eu sou Francisco Feitoza, Rio de Janeiro - Brasil
Hello
👍