@@armaghanaziz6627 Agreed, he comes across as honest, which isn't common on youtube. Clearly knows what he is talking about and knows how to make good videos too.
Hey, I've been using the HOTO Compressed Air Capsule and it's been a game-changer for keeping my desktop and keyboard clean. The vacuuming power and blowing capabilities are impressive, plus the multiple tubes and high-quality filters make it versatile. Highly recommend it for maintaining a spotless environment!
I basically took your last 1400 budget build and upgraded everything to the parts mentioned here: but sticked with the nzxt h1 case. So far - everything running cool and quite quiet!
Finally found a tech channel that is classy and has tasteful editing. The youtube scene for PC Parts is littered with tiktok format editing with a lot of shouting and crazy editing.
At this point is ddr5 definitely better than ddr4 no matter what? Cuz i think he said in the video that the latest ddr4 perforns better than the first gen ddr5?
Was it streamlined? Were the cpu is 13th gen the mobo is 12th gen but supports 13th gen, do I need to update the bios or is it still plug and play? Like just install the cpu and boot it up as normal
@@cryo4183 from what i read it is needed so i did update the bios before the first startup and it worked flawlessly after that. also stays really cool.
@@SWAGMESSIAH404 Ha i like you name but it would look way better without the 404 So SWAG MESSIAH would be perfect imo anyways Just sayin And if this pc is just your SECOND what is your MAIN pc specs?
That's almost my build ! The only notable difference is the case, I went for the tad larger Lian Li 215 with 2x200mm fans at the front. I highly approve the use of Fan Control for fans, and suggest Signal RGB for the RGB as well. These two are able to tune everything without installing every single company software. As always, amazing video quality.
Hey there! As a fellow tech enthusiast, I understand the importance of keeping our setups clean. Have you considered the HOTO Compressed Air Capsule? It offers powerful vacuuming and blowing capabilities, making it perfect for maintaining a spotless environment. With its compact size and versatile accessories, it's a great tool for both desktop and car cleaning. Plus, the brushless motor ensures enhanced power. Check it out!
You may not have air getting trapped in the pump block, but with the hoses like that you will start to see air pockets developing at the top of the radiator where the hoses connect. So, you'll eventually start to see reduced flow to and from the pump block because it'll start to starve the lines. Having the radiator flipped with the hose connections on the bottom will eliminate that. And, since the pump block is mounted lower than the top of the radiator, air won't get trapped in the pump block.
Actually, I think it still would get trapped in the pump block because the air is going to go up, I don't think the air would be able to go down through the lines then up into the rad
Air will work to the highest point, which is the top of the radiator. As long as the pump is below the intake/ outflow of the radiator pump wear would be expected to be minimal.
PLEASE. Don't let anyone buy you out. Your production value is one of the, if not, THE best ony RUclips. I'm not saying don't change but just keep up your amazing work on these videos!
i built my first pc and bought these exact parts because i fell in love with the design ☺️ thank you so much for making this vid i wouldn’t have a pc if it weren’t for this vid. ❤️
Im looking at spending this much, it will be my first build and i like the look of this. To add to that your video has made it really clear how to build it! I'm going to build this
I love the NZXT H5 Flow case. I recently rebuilt by PC in this case and it was very easy. I especially love the angled fan to draw in fresh air for the GPU. Overall, I would HIGHLY recommend this case for new builders.
Hey there! I noticed you left a comment with "{{3}}". Based on the title and your comment, it seems like you're interested in PC building and maintenance. Have you heard of the HOTO Compressed Air Capsule? It's a compact device that combines vacuuming and blowing capabilities, making it great for cleaning your desktop, car, and more. It's got some cool features like multiple tubes, high-quality filters, and efficient storage. Might be worth checking out if you're looking for a versatile cleaning tool! 😄
@@josiahdublin7816 for graphics cards? Current generation hasn't released mid range cards yet. 4060 ti rumored card would be be midrange. And 4050 would be entry level.
@PurpleRupees the 60 and 50 series of cards are budget. For nvidia the 70 is midrange and 80 and 90 being the high end ones. The 4070ti is an overpriced mid range card.
@@josiahdublin7816 Nvidia has convinced people that the 70 tier is high end because people are now paying high end prices for mid range cards. I rememeber paying $1050AUD for my 1080ti but now the cheapest PNY 4070Ti is on sale for $1299AUD reduced from $1499..
At roughly the same price, I went with the 5800X3D as it matches the 13600k in most games but greatly exceeds it in MMOs. This is definitely the intel CPU worth getting though no doubt!
Yep! i went with the 13600k and have no regrets. im hoping intel can get their GPU game together too so we get lower prices. Might buy an arc a750 for my son's pc
Very cool video. Good to see there's still some interesting builds to be had in this market. Still, I am never buying another NZXT product after the H1. Annoying that they messed it up, but the reason I refuse to give them any more money is that their support is horrible and their response to major defects in their products is horrible.
That's the only product that I won't buy from NZXT. Since their other parts are functioning well, I would recommend them. Customer service/support is hit or miss, different people will experience different types of service they receive
@@keonxd8918one of their products except for their power supplies. Their fans are overpriced and mediocre. Same with their AIOs. And their cases are either toasters, like the h510, or overpriced.
I was considering an i7 or i9 with my RTX 4090 but went with the last-gen i5, and it's more than fine. Happy that you agree, I was worried if I was bottlenecking myself from the start :)
@@s8n.. i mean whats even the point of getting 20+ cores for gaming aside from bragging rights? you wont even use all of them and you'd end up spending more on cooler/motherboard/PSU/ power bill. its a waste. i got a i7 13700kf with 4070ti and the cpu doesnt even get used that much, when 3d rendering id rather just use the GPU only as the CPU eats as much as the GPU in terms of wattage while not adding much to lowering render time.
@@fdevaa i mean the 7800x3d(395 bucks ish) costs less than the 13900K and performs just as good in games or sometimes better, as well as having a much much much lower power consumption. can also be cooled with a simple double tower cooler, which at the most costs 70-100 bucks depending on how fancy you want to be (ive got two friends that use air cooling systems with it, one a cheaper version and another one went with a fancier one - none of them have any issues playing games on fancy settings and 2K) mainboards are probably the only real pricey thing, but even there you can make affordable choices & ddr5 ram aint much more expensive than ddr4 (if at all) either. the only reason for buying these high core CPUs is for creative reasons i suppose - c4d, blender, AE, premiere, vegas whatever. would go with the 7800x3d anyday of the week as for now when you got a 4070ti or better
I would have put the radiator top mounted as an exhaust with front panel fans as intake for cool air, the way you mounted it the cool air passes through the cpu radiator heating up the whole case
Looks good. I think the radiator would have looked better on top which would have allowed for the cooling pipes to stay clear of the AIO LCD. Great upgrade for your friend.
Not to mention those front fans are gonna blow the heat from the radiator into the case, unless they are set to pull it out of the case. that would mean the others ar set to push air in.
I got almost the same pc spec for spec except I went with the Ryzen 5 5600 due to pricing reasons in my area. I spent about 2500 USD on my machine but I'm damn happy with it! Great to see even Opti likes the build
Awesome edit! Really liked the cinematic shoots. I was curious and configured your build. Adds up at ~ 2350€, so 2500$. Don't know if in Germany everything is 25% more expensive or it's just the market. This makes me sad ^^
For EU we have to pay import Tax on hardware, which generally speaking is ~20% since it applies to the high-bracket of taxes. In some countries only the low tax-bracket (9%) applies so hardware can be cheaper, but compared to the US we got it rough =)
Great video, explained very nicely and clearly. Question for the experts, I was told to go with AMD Ryzen 7 5800x (my budget for first PC) but I notice ALOT of people on YT go with Intel?
Cheaper board on 13th gen Intel for completely new builds still compatible on Z/B6XX mobos. Gaming crown will definitely be AMD's once 7XX0X3D CPUs release but atm it's slightly in favor of Intel
This setup is near identical to the setup that I made myself. I went with the fractal meshify 2 case simply because building with it is great and it has a ton of space. I also went with the intel i5 14600k rather than the 13600 but they're both identical. I also switched to the z790 just because I plan to stick with DDR5 and it was cheaper than the z690. Both builds are a 1440p beast!
Just buy used when looking for previous gen stuff. Sure it’s not going to last as long but if you’re buying 80/90 cards you probably aren’t going to keep it that long anyway. I payed 400 dollars for mine used 3080, and I intend to sell it within two years which would probably mean getting half of that back.
Nice. I just bought an RTX 4070 TI build, with an i7 13700KF, 64gb ram, and 2tb SSD, running on the Asrock Z690 Steel Legend Wi-Fi. To say that my current PC is old would be an understatement: currently rocking the 970, with an i7-6700K from 2015! The new PC should be here next week and is going to be an enormous upgrade, right in time for Starfield and Cities Skyline 2!
Light-years better than what I had. Everything loads so quickly, no issues with any games, everything at the highest settings. Well worth the purchase. @@jex115
So shouldn't tubes be other way (at the bottom) for front mount if we wanna minimize air bubbles being recirculated? Didn't Gamers Nexus do an entire video piece on this to put it to rest?
@@danielboyas7645 he called out the issue of eventual "bubbling" noises that occur in this orientation over time. Not trying to start some argument, just thought I'd call out something another creator actively investigated. Performance will probably be fine but ideal positioning is still tubes down for pump life longevity and noise reduction. See GN video on the topic from 18:00 - 19:46 timestamp
I'm soooooooo confused. That GPU and CPU by themselves are $2000 on the amazon links and the total is $3,662.20 AUD ($2558 USD) if you add every item linked in the description? Perhaps you mean $2000 GBP?
@@nostrum6410 not sure where you live but if you swim in the ocean for long enough you'll eventually get to another land mass and they'll usually deal in other forms of currency.
The radiator should be mounted tubes down, so that the air gets trapped on top of the radiator and doesn't affect the water flow. If tubes down doesn't fit, the second best option is to mount it on top of the case as exaust. This has been proved by gamers nexus.
![[FREE] KEY GLOCK X METRO BOOMIN TYPE BEAT - 'Dragon'](http://i.ytimg.com/vi/yQZFCmUoAkQ/mqdefault.jpg)
Opti always releases quality videos. This is why he is quickly becoming my favourite tech youtuber
let's bang, bro
same
best thing about him is the decency
You misspelled "muscles"
@@armaghanaziz6627 Agreed, he comes across as honest, which isn't common on youtube. Clearly knows what he is talking about and knows how to make good videos too.
Even though I have my own pc already, I never get tired of watching you building them, especially with this build and production quality! Keep it up!
100%
0:04 "What password do you use" - Optimum Tech 2023
I’ve watched this video so many times. The production quality is just so incredibly amazing
Same
Same
same
same
The angled fan at the front is super cool, it reminds me of airflow designs case manufacturers did back in the 2000's
WQHD Godmode the Alight Basser 🎉
Hey, I've been using the HOTO Compressed Air Capsule and it's been a game-changer for keeping my desktop and keyboard clean. The vacuuming power and blowing capabilities are impressive, plus the multiple tubes and high-quality filters make it versatile. Highly recommend it for maintaining a spotless environment!
omg. the opening lighting & pose at the beginning. literally stunning
I basically took your last 1400 budget build and upgraded everything to the parts mentioned here: but sticked with the nzxt h1 case. So far - everything running cool and quite quiet!
quite
Not to be that guy, but it’s *quiet
@@rat459 its quite quiet :D
@@hellovolker Nice way to put both words together lol, never would have thought of that
@@rat459 It doesn't even work.
Love the natural sunlight on this one
I’m going with this exact build after months of research!!! 🥳🙌
how do you like it?
do u like it
Finally found a tech channel that is classy and has tasteful editing. The youtube scene for PC Parts is littered with tiktok format editing with a lot of shouting and crazy editing.
With the current ddr5 pricing and the fast ddr4 kit running low on stocks, ddr5 starts to make more sense this year.
At this point is ddr5 definitely better than ddr4 no matter what?
Cuz i think he said in the video that the latest ddr4 perforns better than the first gen ddr5?
@@GORILLA_PIMPis thats the mother board?
I literally built your 3090 SFF version from 2 years ago, you have well and truly raised the bar! absolutely love it mate!!
the quality of these is just insane, fav tech youtuber
I just built this as my first PC ever! It looks so freakin good. Thanks for the build guide.
Was it streamlined? Were the cpu is 13th gen the mobo is 12th gen but supports 13th gen, do I need to update the bios or is it still plug and play? Like just install the cpu and boot it up as normal
@@cryo4183 from what i read it is needed so i did update the bios before the first startup and it worked flawlessly after that. also stays really cool.
Do you think it would be able to run vr games like beat saber? =) Im considering building this as my 2nd pc
how did you manage to get the motherboard on the standoffs of the case? I can’t seem to make it fit
@@SWAGMESSIAH404
Ha i like you name but it would look way better without the 404
So SWAG MESSIAH would be perfect imo anyways
Just sayin
And if this pc is just your SECOND what is your MAIN pc specs?
That's almost my build ! The only notable difference is the case, I went for the tad larger Lian Li 215 with 2x200mm fans at the front.
I highly approve the use of Fan Control for fans, and suggest Signal RGB for the RGB as well. These two are able to tune everything without installing every single company software.
As always, amazing video quality.
thats the case i have, very nice case with lots of airflow
Does the motherboard has ARGB inputs
Do u got bottom airflow fans
@@Filthyt No fans at the bottom of the Lian li 215
is it loud when you're playing heavy games?
I love the healthy and stylish gamer vibes on this channel, so refreshing and inspiring
Yeah, this guys builds are more tasteful than the average tech tuber
Hey there! As a fellow tech enthusiast, I understand the importance of keeping our setups clean. Have you considered the HOTO Compressed Air Capsule? It offers powerful vacuuming and blowing capabilities, making it perfect for maintaining a spotless environment. With its compact size and versatile accessories, it's a great tool for both desktop and car cleaning. Plus, the brushless motor ensures enhanced power. Check it out!
You may not have air getting trapped in the pump block, but with the hoses like that you will start to see air pockets developing at the top of the radiator where the hoses connect. So, you'll eventually start to see reduced flow to and from the pump block because it'll start to starve the lines. Having the radiator flipped with the hose connections on the bottom will eliminate that. And, since the pump block is mounted lower than the top of the radiator, air won't get trapped in the pump block.
I noticed that too, you are right
Actually, I think it still would get trapped in the pump block because the air is going to go up, I don't think the air would be able to go down through the lines then up into the rad
top mount is the way to go in my opinion
Top mount all the way
Air will work to the highest point, which is the top of the radiator. As long as the pump is below the intake/ outflow of the radiator pump wear would be expected to be minimal.
PLEASE. Don't let anyone buy you out. Your production value is one of the, if not, THE best ony RUclips.
I'm not saying don't change but just keep up your amazing work on these videos!
No-nonsense. Straight to building with tips. 👍👍
I dont game, have no intention to or do any intensive pc work but i still enjoy watching these videos.
The most vascular tech youtuber around.
Fan Control app is such an amazing tool. Wonderful build Opti!
My man, you are looking HUGE.
Keep at it.
Lmfao
Awesome quality as always my G!
Love to see it man!
Fan Control is awesome
Your guns are growing exponentially my brother
How did I get 1.2k likes?
Putting to shame 99% of any "pro" channel or website...
God is an RUclipsr too?
@@ultravisitors yes
Cringe
As usual !
Most satisfying build video for this year so far. Great one.
i cannot like this enough! As usual, top notch quality videos
The best PC builder! Straight satisfying!
Bro your production level is clean as fuck… I don’t even care about the build specs - it’s that produccy ❤
That's what every lonely loser comments for pity likes
that box opener is so satisfying @ 3:33
always love the clean video
Build is complete and drops the hardest edit ever
Really enjoyed this vid, it’s cool to see setups in realistic budgets that still look sick
I agree it is cool to see good-looking budget builds, only this isn't a budget build. It's a $2000 build. ;) You still need monitors broh!
$2000 "realistic budget" 🤣
@@digitalvii jobless behaviour
@@DJCrAzYGuYTube did you check the links it costs 2500€
i built my first pc and bought these exact parts because i fell in love with the design ☺️ thank you so much for making this vid i wouldn’t have a pc if it weren’t for this vid. ❤️
same here am buying them today
how many of the singular fans did u buy?
@@LazMann77 how many fans you buy
@@vex3482 fans 140mm front and a normal 120mm at the back with the artict p12
Im looking at spending this much, it will be my first build and i like the look of this. To add to that your video has made it really clear how to build it! I'm going to build this
Beautiful build. NZXT makes the best looking components period.
Man that is such an awesome build for 2k...Here in Canada that would end up running us about 2700 bucks..pain
2k for 70 class gpu and i5 build is ridiculous.
Best Bang for Buck 2K Build
Great build. I'm currently slowly putting my build together, coming from a GTX 1070 as well. I'm considering the RTX 4080 Super though.
rtx 4080 super?
@@anwarlacreemreleases end of January I think
@@SJ-qs5jo it released on january 8th, i just didn’t know new Super cards existed.
@@anwarlacreem might of been announced then but it releases 31st jan for £959
Literally the perfect build. This thing looks so nice.
This build looks beautiful and nice, i love it
I love the bright and color on this video
My dream pc❤️😍
Great Video!!!!! We all need friends like you!!
I love the NZXT H5 Flow case. I recently rebuilt by PC in this case and it was very easy. I especially love the angled fan to draw in fresh air for the GPU. Overall, I would HIGHLY recommend this case for new builders.
is this RGB or non RGB version of Flow Case?
Hey there! I noticed you left a comment with "{{3}}". Based on the title and your comment, it seems like you're interested in PC building and maintenance. Have you heard of the HOTO Compressed Air Capsule? It's a compact device that combines vacuuming and blowing capabilities, making it great for cleaning your desktop, car, and more. It's got some cool features like multiple tubes, high-quality filters, and efficient storage. Might be worth checking out if you're looking for a versatile cleaning tool! 😄
Solid 1440p gaming is finally here.
4K, I will see you in about 4 years.
Hey man this build looks insane 💥👏🤯❤
Young daddy with another banger build
Looks great!
im sitting happy in my chair every time you upload Optimum Tech. It is very satisfying to watch your vids😀
I am still absolutely flabbergasted that THIS is considered Mid-Range!
Who is saying this is mid range? This is high end.
@@PurpleRupees Not with the current generation.
@@josiahdublin7816 for graphics cards? Current generation hasn't released mid range cards yet. 4060 ti rumored card would be be midrange. And 4050 would be entry level.
@PurpleRupees the 60 and 50 series of cards are budget. For nvidia the 70 is midrange and 80 and 90 being the high end ones. The 4070ti is an overpriced mid range card.
@@josiahdublin7816 Nvidia has convinced people that the 70 tier is high end because people are now paying high end prices for mid range cards. I rememeber paying $1050AUD for my 1080ti but now the cheapest PNY 4070Ti is on sale for $1299AUD reduced from $1499..
I‘m a simple man, I see new Optimum video, I click like
Wha would be a suitable monitor/screen that not only is compatible but also complements the PC build...
Any 1440p monitor between 144hz and 240hz with Nvidia G-sync will do.
After seeing so many all white builds, I was swayed to build one for my first PC ever. Then I saw this video. Def love these vibes so much more.
Literally me right now.
@@Venrick let me know how it goes!
At roughly the same price, I went with the 5800X3D as it matches the 13600k in most games but greatly exceeds it in MMOs. This is definitely the intel CPU worth getting though no doubt!
Yep! i went with the 13600k and have no regrets. im hoping intel can get their GPU game together too so we get lower prices. Might buy an arc a750 for my son's pc
@@maxjames00077 I mean at that point just get him an a770 lol
13600kf definitely underrated
Your presentation, graphics and shot composition and lighting is the best I've seen on youtube, bar none.
Very cool video. Good to see there's still some interesting builds to be had in this market. Still, I am never buying another NZXT product after the H1. Annoying that they messed it up, but the reason I refuse to give them any more money is that their support is horrible and their response to major defects in their products is horrible.
That's the only product that I won't buy from NZXT. Since their other parts are functioning well, I would recommend them. Customer service/support is hit or miss, different people will experience different types of service they receive
@@keonxd8918one of their products except for their power supplies. Their fans are overpriced and mediocre. Same with their AIOs. And their cases are either toasters, like the h510, or overpriced.
@@keonxd8918 The quality of that case and coolers is bad?
Sweet build Ali 🥰😉🤯. I’m sure your friend will love it 💪🥳. May your friends frames be high and their temps low 💨🌬. Happy gaming 🤤
Very nice! How you gonna make me keep waiting for that 4090 SFF build tho?
The 18:9 video ratio is really good for mobile viewers. Keep it up my fav utuber👌👌👌
I was considering an i7 or i9 with my RTX 4090 but went with the last-gen i5, and it's more than fine. Happy that you agree, I was worried if I was bottlenecking myself from the start :)
i7 12700k and i5 13600k
are both more than enough for rtx 4090
even with rtx 9090 it wont bottleneck lmfao
@@nanezferrer3565 For 1440p and ultra wides, yes, 12700k bottlenecks 4090. 12600k aswell.
@@nanezferrer3565 if you already ball out on a 4090 and cant manage to get a 13900K or 7800x3d, then theres something wrong with your priorities smh
@@s8n.. i mean whats even the point of getting 20+ cores for gaming aside from bragging rights? you wont even use all of them and you'd end up spending more on cooler/motherboard/PSU/ power bill. its a waste. i got a i7 13700kf with 4070ti and the cpu doesnt even get used that much, when 3d rendering id rather just use the GPU only as the CPU eats as much as the GPU in terms of wattage while not adding much to lowering render time.
@@fdevaa i mean the 7800x3d(395 bucks ish) costs less than the 13900K and performs just as good in games or sometimes better, as well as having a much much much lower power consumption.
can also be cooled with a simple double tower cooler, which at the most costs 70-100 bucks depending on how fancy you want to be (ive got two friends that use air cooling systems with it, one a cheaper version and another one went with a fancier one - none of them have any issues playing games on fancy settings and 2K)
mainboards are probably the only real pricey thing, but even there you can make affordable choices & ddr5 ram aint much more expensive than ddr4 (if at all) either.
the only reason for buying these high core CPUs is for creative reasons i suppose - c4d, blender, AE, premiere, vegas whatever.
would go with the 7800x3d anyday of the week as for now when you got a 4070ti or better
clean production. clean editing. clean build. good at gaming. nice
Great build but i wish you did the prices in AUD as well. The core i5 and 4070ti alone is about $2k AUD
$3282AUD prices ripped from Mwave and that's with the cheaper PNY card.
Actually 3000 dollar pc build . Either way kinda clean build 👍🏼
12:09 you need a sag bracket asap
Beautiful. Balanced. Doesn’t break the bank. Great build!
Bro it's 2k lol what are you, rich?
@@kingpok3453yes
@@kingpok3453 ya
I would have put the radiator top mounted as an exhaust with front panel fans as intake for cool air, the way you mounted it the cool air passes through the cpu radiator heating up the whole case
i wish i was his friend. loved that pc simple and powerful
Looks good. I think the radiator would have looked better on top which would have allowed for the cooling pipes to stay clear of the AIO LCD. Great upgrade for your friend.
do you think gta rp would run on this build
Not to mention those front fans are gonna blow the heat from the radiator into the case, unless they are set to pull it out of the case. that would mean the others ar set to push air in.
Subscribed ! This guy is doing quality contet.
Is it just me or do tech videos just not get recommended anymore?
if you watch more unrelated content then RUclips will assume your no longer interested
Just you
It's just you sorry
This video was recommended to me
Babe wake up Optimum tech uploaded
I got almost the same pc spec for spec except I went with the Ryzen 5 5600 due to pricing reasons in my area. I spent about 2500 USD on my machine but I'm damn happy with it! Great to see even Opti likes the build
I spent 1200 on my 3090ti and 5600x build
@@nicekeyboardalan6972 1100 USD for my 6950 xt and 7700x
@@senpaihabit6232 nice
Cleannnn build. Your cable management is appreciated.
Awesome edit! Really liked the cinematic shoots.
I was curious and configured your build. Adds up at ~ 2350€, so 2500$. Don't know if in Germany everything is 25% more expensive or it's just the market. This makes me sad ^^
For EU we have to pay import Tax on hardware, which generally speaking is ~20% since it applies to the high-bracket of taxes. In some countries only the low tax-bracket (9%) applies so hardware can be cheaper, but compared to the US we got it rough =)
at start 2000 sweden was best place to build gaming pc s :D
@@joskrause9593 i think in sweden you didnt pay 20% taxes, no idea how its now
It would end up costing 2800€ in Finland or around 3000 usd
Don't go 4070ti. Value is bottom of the barrel
I love OT for gaming tech and hardware and Mrwhosetheboss for tech in general
Great video, explained very nicely and clearly. Question for the experts, I was told to go with AMD Ryzen 7 5800x (my budget for first PC) but I notice ALOT of people on YT go with Intel?
intel has the gaming edge in most situations, but not by much. extra vcache doesn't help gaming in all situations
Cheaper board on 13th gen Intel for completely new builds still compatible on Z/B6XX mobos. Gaming crown will definitely be AMD's once 7XX0X3D CPUs release but atm it's slightly in favor of Intel
Now this is an optimistic >Tech channel 💥
Wait, it seems like the mother board isn't compatible with 13th gen?
than how did he install it. i think it is compatible
Fantastic build
How’s his cpu
This setup is near identical to the setup that I made myself. I went with the fractal meshify 2 case simply because building with it is great and it has a ton of space. I also went with the intel i5 14600k rather than the 13600 but they're both identical. I also switched to the z790 just because I plan to stick with DDR5 and it was cheaper than the z690. Both builds are a 1440p beast!
Where is the list of 240mm cooler alternatives?
Love the airflow of the case
9:46 dude 4070ti is great
It's questionable especially at MSRP
@@krakentortoise7531 is it ? I don't think so, you get better performance than 3080 i mean, if you can get it for 800 bucks as he said
Hey Optimum Tech ma, what do you use for clocks/temps OSD monitoring ? Looks quite nice, my Afterburner/RTSS OSD looks like crap...
agreed, would be good to know
same
Watching this currently waiting for my new PC parts to arrive.
I'm so mad for how much I paid for my 3080 not that long ago.
cope
@@prozekutor You better start getting ready for school, you don't want to be late.
Just buy used when looking for previous gen stuff. Sure it’s not going to last as long but if you’re buying 80/90 cards you probably aren’t going to keep it that long anyway. I payed 400 dollars for mine used 3080, and I intend to sell it within two years which would probably mean getting half of that back.
Purchased during the mining craze?
@@ij6708 yep
Nice.
I just bought an RTX 4070 TI build, with an i7 13700KF, 64gb ram, and 2tb SSD, running on the Asrock Z690 Steel Legend Wi-Fi. To say that my current PC is old would be an understatement: currently rocking the 970, with an i7-6700K from 2015! The new PC should be here next week and is going to be an enormous upgrade, right in time for Starfield and Cities Skyline 2!
So how is the Pc?
Light-years better than what I had. Everything loads so quickly, no issues with any games, everything at the highest settings. Well worth the purchase. @@jex115
Yeah but can it crysis 4????
@@GORILLA_PIMPcan it The last of us 1?
So shouldn't tubes be other way (at the bottom) for front mount if we wanna minimize air bubbles being recirculated? Didn't Gamers Nexus do an entire video piece on this to put it to rest?
And if you watched it he said that as long as the pump is not the highest point it will work fine.
@@danielboyas7645 he called out the issue of eventual "bubbling" noises that occur in this orientation over time. Not trying to start some argument, just thought I'd call out something another creator actively investigated. Performance will probably be fine but ideal positioning is still tubes down for pump life longevity and noise reduction.
See GN video on the topic from 18:00 - 19:46 timestamp
Wow those blue lights 😍
1:39 are u married?✋💍
best tech youtuber
I'm soooooooo confused. That GPU and CPU by themselves are $2000 on the amazon links and the total is $3,662.20 AUD ($2558 USD) if you add every item linked in the description? Perhaps you mean $2000 GBP?
cpu is 280 and gpu is 830 on newegg
@@nostrum6410 not sure where you live but if you swim in the ocean for long enough you'll eventually get to another land mass and they'll usually deal in other forms of currency.
$3282 Dollaroos, prices ripped directly from Mwave minus shipping. That's with the cheapest 4070Ti (PNY).
@@FourthLastok smart azz how much would a good snorkel an flipper set cost for swimming to these other "land masses"????
I just upgraded to 1070 and its rockin'.
The radiator should be mounted tubes down, so that the air gets trapped on top of the radiator and doesn't affect the water flow. If tubes down doesn't fit, the second best option is to mount it on top of the case as exaust. This has been proved by gamers nexus.
No it hasn’t this has been debunked for so long, it’s completely fine in that orientation
I'm guessing your friend is quite happy by now.
Thx for this build video, useful, as I am considering something similar.
its 2.650 euro (2.825 $) if u add shipping for all components will be around 2.8k euro (2.985 $) , idk why u clickbait so much
But. This is usd we talking about. Not euro
Idk if what I said is correct but you should account for which currency this build was on.