My entry to AR’s were BCM’s. Good for the money and a decent place to start. Once I tried Geissele Super Duties I sold all of my BCM’s and pretty much run exclusively Geissele’s. Super Duty upper plus the Super 42 Buffer Assembly makes them hands down the softest shooting most reliable rifles I own. I love that Geissele caters to the civilian market as much as they do MIL/LE.
I’d stick with bcm and upgrade the parts you need from geissele, barrels triggers recoil systems BCGs and rails (if running lasers) I’d go with geissele but bcm wins for receiver fitment, tightness, gas block quality, etc BCM wins at a better price, bcm also makes the best handguards for small size and good rigidity Buying just the parts you need from geissele can allow you to have a much better gun than any factory offering with a great price
@@Patrick_Bateman____ if your not running a zero’d device that requires rigidity than BCM wins 10/10, better fit weight and it is relatively rigid (mlok is cut only where needed on the inside for example) plus it has a unique and innovative lock up system
@@MatthewC176 I’d agree with all of that. They also heat up little faster but I wouldn’t consider that significant. Any handguard will get hot fast if you dump multiple mags a minute. Weight is a matter of personal preference. I went through a phase where I wanted everything as light as possible. Nowadays I prefer the trade off extra weight has on felt recoil.
Proud you guys are located in PA and are fellow Pennsylvanians. I'm extremely thankful you're all on our side. I appreciate your dedication to quality and hardwork to ensure the best possible product for our warfighters and civilians alike. Thank you guys again for all that you do and please keep advancing and driving the industry forward.
@@gadsdenjim8785 why would you say “clearly no one paid attention”? That’s almost the only part I bothered to watch. I didn't make the original comment, but . . . . clearly you didn't pay attention to what he said, because he said "I just wish Geissele wold come out with a .308", and nothing in the video (or your comment) indicated that they would. Just like there's no .260rem SCAR, and there never was a 6.5CM OBR, if Geissele thinks they're going to conquer the world with their new 6.5, they may not want to mess with a new gas/accuracy/reliability optimization if "the" gun the military is using is a 6.5.
I, along with many others (i.e. hoplopfheil), have been waiting forever for you guys to bring back the ALG handguards. So, THANK YOU FROM THE BOTTOM OF MY HEART!
He sounds like a good, down to earth guy to work for. One who will listen to his employees and appreciates their hard work. That's why I own Geissele equipment. Well done Sir!
This is great Geiselle background info and news on ALG. I never knew much of this except for the bolts. I have a Super Duty and a holiday sale/Blemish parts Geissele and they are both terrific. The Super Duty is way more accurate than I expected for a non-match rated barrel. I appreciate them even more now!
The heavy forend barrel profile was a result of bore gauging M16A1 barrels where the gauge would hang up at the FSB. They assumed this was from bent barrels, instead of checking carbon fouling and port erosion, which was the actual cause. So with the M16A2, they decided to increase the forend diameter. This also transferred over to the Colt 727 carbine, which had a heavy forend with M203 bracket step cut. That barrel profile was used for the first generation of M4A1s/M4s.
Engineering, precision, brief metallurgy... I have not even gotten my grubby-unworthy hands on a piece yet; but already have a new favorite weapon. thanks; great video
What a great group of guys! Turns out I live about 20 min from these guys and worked in their town of North Wales for over 20 years. So I was left with no choice but to buy a 5.56 super duty with the PA Keystone emblem right on the lower. Just Awesome!
Had my ALG act trigger a while now it's a great trigger, then goty first SSA few weeks ago. Its is awesome! Great products need the ALG for the alb& looking at supper 42 to replace my buffer
👍🏻Wasn’t quite expecting this from this video. Though ti would be a basic salesmen show and tell but it was full of interesting info! And I LMFAO at the joke at the end-that is exactly what immigrant moms are like👍🏻👏🏻
Thank you for the update! I usually recommend my new gun buddies start with an affordable PSA set up and a bunch of plinking ammo. Once they've outgrown it, I ALWAYS say go super duty, whether it be a completed upper receiver or a whole rifle.
Wow!!! Absolutely blown away with what you guys do in house. I only have 4 of your triggers. I need to get your rifle or at least a blank for my LMT MWS which has disappointed me in accuracy and being overgassed.
Man I love hearing Bill’s mother stories. I think it’s super awesome Geissele is doing cut barrels. I hope in the future you guys sell blanks for machining for bolts actions. Would love to spin up a Geissele for an AI. I know exactly which gunsmith I would send it to and he his very close to Norristown hint: mad scientist at PVA. The new 6.5 looks great, would love to see Geissele engineers build a bipod, maybe even design a precision Ar Butt stock. The shorty 8.5 inch looks awesome and that butt stock design is very creative. Keep it up Geissele automatics you guys are killing it.
I feel like I just went to school. I love this. I love my (2) SuperDuty rifles. I have your triggers and optics mounts on all of my rifles, including some of your competitors rifles. I proudly rock a “For God And Country “ sticker on both of my vehicles.
Will all the rails/hand-guards start shipping with the steel QD inserts? It’s playing Russian roulette purchasing from you guys with these rails and it sucks because I want one but don’t want to get the one without the steel QD inserts because the steel QD mount eats away at the rails and we all know steel is stronger than aluminum which is why.
The 14.5 6 ARC looks cool but bolt life is a problem from what I’ve read on forums in AR platforms, the 6.5 Creedmoor barrel that is hammer forged and chrome lined will replace my MRGGS LMT 6.5 Creedmoor barrel after I shoot it out in a couple of months, the little gun with the 2 stage stock looks to be the Q Honey Badger killer. Might be a little heavier and I love my HB but the cheek weld on it is mediocre at best. The rest is either Fudd stuff or just mediocre. The brownie gun is a nice shade though.
Don't really care about the sling or the optic, likely a lot of people don't. Hopefully they sell these "slick" as well for a couple bills less, otherwise might be seeing a lot of those optics on the resale market. I'm also unsure that omitting MLOK at the 3 and 9 o'clock positions was a good idea for a rail. Usually it's the ones on 45s that are "take it or leave it." Hoping again that they do a full featured rail, or a more standard 3 6 9 version.
He knows his customers and with that particular rifle, it will be one of the first things replaced. He don't care about no generic ass charging handle. The super charging handle, though I really like that thing. The airborne is too small and awkward for me
Yes, I wonder what would happen if somebody 3-D printed a barrel with superior, steel something like a very thick Inconel lining instead of chrome it is my personal belief that a full 3-D printed barrel with the advancing technology is the way of the future specially how suppressors are manufactured. One could conceive of a integrally, suppressed rifle barrel, and suppressor combination fully machined I mean 3-D printed together. 😂
I tell everyone the most bang for bucks rights now with outstanding quality is my 11.5 super duty. That’s my go to night vision load out. It was ready to go out the box. I put on my mawl c1 and my rc2 with an Xps3
I prefer to assemble my own ARs, after they came out the ALG V series was my go-to sub $200 rail, but since they were discontinued I've returned to purchasing rails from BCM, Troy, and even Samson. ALG would get more of my money if they start selling their rails again.
I always sing praises for Geissele. Glad this was uploaded. Did the RUclips people let you know why they took down the stream? I wish I was there watching their heads explode as you passionately laid out the details of The Boss Gun.. Fragile sensitivities and emotions taking over. Pathetic. Great Guns. Bill you Rock.
I'm super curious to hear reports about the tri gas port setup. From what I understand, anything under 10.3" for 5.56 or 9" for 300bo renders each respective round pretty worthless due to the overgassing and lack of dwell time and super underburned powder. This could possibly change that
@@BarnDoor-won5ve not so much for 300blk, but under 10.3 for 5.56 is useless. I personally wouldn't go under 11.5 for 5.56 because of the big jump in velocity from 10.3/5 - 11.5
I agree with the distaste of the high optic mounts and risers that seem to be "in" right now. It's like it's a race to the top to see who can make the highest optic mount or riser. The trends in the gun community never cease to make me laugh.
I know, especially with all that human trafficking, processing and distribution they perform for the federal government. Now they can do it with class😃👌
My entry to AR’s were BCM’s. Good for the money and a decent place to start. Once I tried Geissele Super Duties I sold all of my BCM’s and pretty much run exclusively Geissele’s. Super Duty upper plus the Super 42 Buffer Assembly makes them hands down the softest shooting most reliable rifles I own. I love that Geissele caters to the civilian market as much as they do MIL/LE.
I’d stick with bcm and upgrade the parts you need from geissele, barrels triggers recoil systems BCGs and rails (if running lasers) I’d go with geissele but bcm wins for receiver fitment, tightness, gas block quality, etc BCM wins at a better price, bcm also makes the best handguards for small size and good rigidity
Buying just the parts you need from geissele can allow you to have a much better gun than any factory offering with a great price
@@MatthewC176
BCM’s win on price. Hand guard I’d call more of a draw. Depends on individual needs and application.
@@Patrick_Bateman____ if your not running a zero’d device that requires rigidity than BCM wins 10/10, better fit weight and it is relatively rigid (mlok is cut only where needed on the inside for example) plus it has a unique and innovative lock up system
@@MatthewC176
I’d agree with all of that. They also heat up little faster but I wouldn’t consider that significant. Any handguard will get hot fast if you dump multiple mags a minute. Weight is a matter of personal preference. I went through a phase where I wanted everything as light as possible. Nowadays I prefer the trade off extra weight has on felt recoil.
@@Patrick_Bateman____ definitely heat up faster, and weight definitely has a penalty on recoil, but it all depends on what your using it for
Proud you guys are located in PA and are fellow Pennsylvanians. I'm extremely thankful you're all on our side. I appreciate your dedication to quality and hardwork to ensure the best possible product for our warfighters and civilians alike. Thank you guys again for all that you do and please keep advancing and driving the industry forward.
I just wish Geissele would come out with a 308.
Google Giessele VSASS it was a trails gun they made I believe. Be cool if they started selling them to the public
Clearly no one payed attention to the 6.5 Creedmoor @ 52:50 That’s 308/SR-25 pattern gun. So wouldn’t be surprised if they put one out in 308.
@@gadsdenjim8785 why would you say “clearly no one paid attention”? That’s almost the only part I bothered to watch. I didn't make the original comment, but . . . . clearly you didn't pay attention to what he said, because he said "I just wish Geissele wold come out with a .308", and nothing in the video (or your comment) indicated that they would. Just like there's no .260rem SCAR, and there never was a 6.5CM OBR, if Geissele thinks they're going to conquer the world with their new 6.5, they may not want to mess with a new gas/accuracy/reliability optimization if "the" gun the military is using is a 6.5.
Seriously
actually read them state somewhere its convertable to 308 at a user level. that could have changed in the final version @@OFFICIALUND
I, along with many others (i.e. hoplopfheil), have been waiting forever for you guys to bring back the ALG handguards. So, THANK YOU FROM THE BOTTOM OF MY HEART!
Hop better get one for review!
It doesn't seem that individual handguards are returning. Sadly, it appears they're only back as part of an entire rifle.
Hop ain't gonna review this...he just roasted the product page
@@brickphone2570 Bingo!
Geissle is bragging about doing business with the LAPD SWAT, one of the most criminal and anti-2A agencies in America.
honestly, I'd rather you ditch the cheap red dot and provide a maritime bolt catch and a better charging handle
How cheap is the sight? I’m considering getting this setup
He sounds like a good, down to earth guy to work for. One who will listen to his employees and appreciates their hard work. That's why I own Geissele equipment.
Well done Sir!
Love the content….it’s nice seeing a review of products that the designer can actually relate and tell the ideas behind.
This is great Geiselle background info and news on ALG. I never knew much of this except for the bolts. I have a Super Duty and a holiday sale/Blemish parts Geissele and they are both terrific. The Super Duty is way more accurate than I expected for a non-match rated barrel. I appreciate them even more now!
This one ….deserves the You Tube “Video Of The Year” period
The heavy forend barrel profile was a result of bore gauging M16A1 barrels where the gauge would hang up at the FSB. They assumed this was from bent barrels, instead of checking carbon fouling and port erosion, which was the actual cause.
So with the M16A2, they decided to increase the forend diameter.
This also transferred over to the Colt 727 carbine, which had a heavy forend with M203 bracket step cut.
That barrel profile was used for the first generation of M4A1s/M4s.
Engineering, precision, brief metallurgy... I have not even gotten my grubby-unworthy hands on a piece yet; but already have a new favorite weapon. thanks; great video
Thank god the ALG handguards are coming back. Wondering if they're going to be the same price point as the old ones though...
Keep dreaming
Not a chance, we have this thing called inflation. Thank the big banks and shoddy govt for that.
I think I also heard they're only exclusive with the complete rifle. Anyone heard different?
Video starts at 5:25
Showing the targets really sold me...this might be my next rifle
What a great group of guys! Turns out I live about 20 min from these guys and worked in their town of North Wales for over 20 years. So I was left with no choice but to buy a 5.56 super duty with the PA Keystone emblem right on the lower. Just Awesome!
Had my ALG act trigger a while now it's a great trigger, then goty first SSA few weeks ago. Its is awesome! Great products need the ALG for the alb& looking at supper 42 to replace my buffer
Border patrol? What border?
It's online
Lol😅 We don't have a border. If we do have, it's wide open.
To the maple syrup brigade
That will be here in Jan 2025.
👍🏻Wasn’t quite expecting this from this video. Though ti would be a basic salesmen show and tell but it was full of interesting info! And I LMFAO at the joke at the end-that is exactly what immigrant moms are like👍🏻👏🏻
Excellent offering guys. Quality at a solid price. I expect these will sell well. Can't wait to het my paws on one.
Thank you for the update! I usually recommend my new gun buddies start with an affordable PSA set up and a bunch of plinking ammo. Once they've outgrown it, I ALWAYS say go super duty, whether it be a completed upper receiver or a whole rifle.
Showing the tools was very cool. Would love to see factory tours and the like. I'm a civil engineer so I find that very cool and interesting.
I bought the original Duty rifle. Great, soft shooting rifle. You guys make excellent products. Keep it up
Wow!!! Absolutely blown away with what you guys do in house. I only have 4 of your triggers. I need to get your rifle or at least a blank for my LMT MWS which has disappointed me in accuracy and being overgassed.
Skip to 5:21 for the video to start
Man I love hearing Bill’s mother stories. I think it’s super awesome Geissele is doing cut barrels. I hope in the future you guys sell blanks for machining for bolts actions. Would love to spin up a Geissele for an AI. I know exactly which gunsmith I would send it to and he his very close to Norristown hint: mad scientist at PVA. The new 6.5 looks great, would love to see Geissele engineers build a bipod, maybe even design a precision Ar Butt stock. The shorty 8.5 inch looks awesome and that butt stock design is very creative. Keep it up Geissele automatics you guys are killing it.
Everything I buy with this gentlemen’s name on it, I’m extremely happy!
1:07:00 : In this video, we learn that Bill is either color blind or has never seen "Tiffany Blue" in his life.
Maybe he is color blind and everyone thought it'd be funny to let him keep thinking that's Robin egg blue and not green goblin green 😂
It's just amazing to see how much Geissele has grown over the years.
You guys should sell all your upper with the relocated forward assist like the GFR
Holidays and Geissele sales are the best combo. For God and Country. 🇺🇸 🦅 2A
I feel like I just went to school. I love this. I love my (2) SuperDuty rifles. I have your triggers and optics mounts on all of my rifles, including some of your competitors rifles. I proudly rock a “For God And Country “ sticker on both of my vehicles.
Good to see Mr Bill Geissele!
You got one job, Kevin! One job! 🤣
Bill, too many options out there, your video cleared my mind Thank you !
Awesome presentation and thanks for the history, cheers!
Will all the rails/hand-guards start shipping with the steel QD inserts? It’s playing Russian roulette purchasing from you guys with these rails and it sucks because I want one but don’t want to get the one without the steel QD inserts because the steel QD mount eats away at the rails and we all know steel is stronger than aluminum which is why.
Can I get a 40 mm green hand guard ? Going with 50 shades of green on my ODG 😮
I wish y’all still produced the Amy Lee Geisel rails miss Amy Lee has incredible taste
The EMR rail is available in two different lengths on the website
Wow! Filling government contracts AND still satisfying commercial sales???
That's Innovative!!! 😂
The 14.5 6 ARC looks cool but bolt life is a problem from what I’ve read on forums in AR platforms, the 6.5 Creedmoor barrel that is hammer forged and chrome lined will replace my MRGGS LMT 6.5 Creedmoor barrel after I shoot it out in a couple of months, the little gun with the 2 stage stock looks to be the Q Honey Badger killer. Might be a little heavier and I love my HB but the cheek weld on it is mediocre at best. The rest is either Fudd stuff or just mediocre. The brownie gun is a nice shade though.
Don't really care about the sling or the optic, likely a lot of people don't. Hopefully they sell these "slick" as well for a couple bills less, otherwise might be seeing a lot of those optics on the resale market.
I'm also unsure that omitting MLOK at the 3 and 9 o'clock positions was a good idea for a rail. Usually it's the ones on 45s that are "take it or leave it." Hoping again that they do a full featured rail, or a more standard 3 6 9 version.
It’d be super interesting to see your take on a short-stroke piston assault rifle hopefully in the near future.
You sell yourself short Bill, that was a gasbuster CH on the ALG El Hefe.
He knows his customers and with that particular rifle, it will be one of the first things replaced. He don't care about no generic ass charging handle. The super charging handle, though I really like that thing. The airborne is too small and awkward for me
Guys! Where is the livestream of the GFW?!?!? It's been 3 months 😒
Great show, awesome information. A Master class in AR platform.
Yes, I wonder what would happen if somebody 3-D printed a barrel with superior, steel something like a very thick Inconel lining instead of chrome it is my personal belief that a full 3-D printed barrel with the advancing technology is the way of the future specially how suppressors are manufactured. One could conceive of a integrally, suppressed rifle barrel, and suppressor combination fully machined I mean 3-D printed together. 😂
Damn... great video, learned allot.
Thank you
Does anyone have any experience with this rifle? I am curious about this one
I tell everyone the most bang for bucks rights now with outstanding quality is my 11.5 super duty. That’s my go to night vision load out. It was ready to go out the box. I put on my mawl c1 and my rc2 with an Xps3
The drive and knowledge he brings is exactly why I never would second guess buying anything Geissele.
are the handguards coming back as an individual unit or are they only being sold as part of an entire "el jefe" rifle?
Seiko Prospex! Also any ETA on Mk1Mod0 rifles?
We any closer to the release of the mrgg?
1. Please sell those colors in handguards separately! 2. Please sell your 6arc barrels separately!
I prefer to assemble my own ARs, after they came out the ALG V series was my go-to sub $200 rail, but since they were discontinued I've returned to purchasing rails from BCM, Troy, and even Samson. ALG would get more of my money if they start selling their rails again.
But without a doubt, you are the best manufacturer of anything thank you for the scar and Tavor triggers
Bravo! Amazing innovation.
Wish you guys would release a couple of 300blk rifles. 😢
please tell me yall are coming out with 6.5 creedmoor barrels!!!!!???? I'd buy that in a heartbeat!
I love Geissele triggers, the ssp flat bow is my favorite by far. The super 42 buffer and spring is awesome as well.
I always sing praises for Geissele. Glad this was uploaded. Did the RUclips people let you know why they took down the stream? I wish I was there watching their heads explode as you passionately laid out the details of The Boss Gun.. Fragile sensitivities and emotions taking over. Pathetic. Great Guns. Bill you Rock.
You can’t handle firearms while on a RUclips livestream
Diarrhea of the mouth indeed haha love it. I can listen to Bill talk guns all day long. All my guns that can, have a Geissele trigger.
I will 110% be buying that GFW in .300 blackout! Say hello to my new home defense gun 😂
I'm super curious to hear reports about the tri gas port setup. From what I understand, anything under 10.3" for 5.56 or 9" for 300bo renders each respective round pretty worthless due to the overgassing and lack of dwell time and super underburned powder. This could possibly change that
@@BarnDoor-won5ve not so much for 300blk, but under 10.3 for 5.56 is useless. I personally wouldn't go under 11.5 for 5.56 because of the big jump in velocity from 10.3/5 - 11.5
All this said is with love ….. you guys are the very best 🙏
I can't wait for mine to finally ship. Bought one before labor day 🙃🙂🙃🙂
I’d rather go with the IWI Z15 and drop a Geissele trigger in it
Respect to your mom! We know what it means!
Does anyone here know if geissele still make the Tavor trigger pack?
What’s up with those upper receivers that look very similar to a BCM MK2 Upper on a few of those guns?
French Shooter here and just bought one 🤘
31:50 you got to love Kevin 🥹
I guess I am crazy too. Cant wait for that stock and 14.5 6 arc to hit the market. Until then, already ordered the book on Amazon lol.
Bill Geiselle very pragmatic with the Seiko diver.
Bill has been investing. Good man. Great American Patriot
I love Bill Geissele - hilarious, down to earth person. No wonder Geissele Automatics has been so successful.
Can we get a 2-5 minute version? Can’t be sitting on the crapper for an hour.
Do the Super Duty lowers have an M16 cut or just a low shelf?
highly informative, thank you.
Offer the ALG rail sections and co-witness rails for us that have your older V-0 handguards.
What ever happened with you guys working with Corvus Defensio to make a trigger pack for the Steyr AUG?
Most likeable guy in the industry . Legend
Is the ALG Go Juice still purple?
Like Matthew's Mission line.
I agree with the distaste of the high optic mounts and risers that seem to be "in" right now. It's like it's a race to the top to see who can make the highest optic mount or riser. The trends in the gun community never cease to make me laugh.
BlackBerry Story was hilarious 😂
When is that receiver set coming out? I don't want 6mm just 5.56
So much respect for Bill and the Geissele Team!
These items are the latest tech money can buy . I’m glad our boarder patrol has only the best in the market!
I know, especially with all that human trafficking, processing and distribution they perform for the federal government. Now they can do it with class😃👌
border
Just a basic sling or is there a quick adjustment?
we want the ALR rails as a separate item. Lets get then out to market
Website specs say the barrel is CHF… “BARREL: 16.25” CHF, Barrel Assembly”
It’s to make sure it hits 16 inches. Every company makes it hair over 16 inches for ATF rules.
Rolex has their own foundry and makes their own proprietary metals.
One of each please.
Cool to see all these new products
Geissele = Omega. LMT = Rolex, Now that’s more like it 👍🏼
I love guislee, but I'm not happy I can't seem to buy just your super bcg. Wtf. Love you
Waiting for the MK5 in 6.5 Creedmoor.
If you guys were working on the scar platform, it would be so much better
That 6.5 Creed rifle looks sick
6mm ARC is the future.