YOU ARE THE DAMN BEST!!!!!! Been struggling for a few hrs on my hw and with your video I learned how to do a solid mesh within minutes. THANK YOU!! 🙌🏽🙌🏽🙌🏽🙌🏽
hey. i did all things exactly like this video but section that is behind of airfoil has a trouble mesh .while other sections have a very nice mesh like this video .could you plz tell me how can i fix this problem?
hey. i did all things exactly like this video but section that is behind of airfoil has a trouble mesh .while other sections have a very nice mesh like this video .could you plz tell me how can i fix this problem?
hey. i did all things exactly like this video but section that is behind of airfoil has a trouble mesh .while other sections have a very nice mesh like this video .could you plz tell me how can i fix this problem?
I could not get my mesh to form to save my life. This is a great tutorial, but the only way I could continue was if I changed my mesh to "soft." After zooming in, the mesh still looks fine, but things look a little crazy in the middle two quadrants (still quadrilaterals though).
hey. i did all things exactly like this video but section that is bottom of airfoil has a trouble mesh .while other sections have a very nice mesh like this video .could you plz tell me how can i fix this problem?
@@sharukumar404 hey. i did all things exactly like this video but section that is behind of airfoil has a trouble mesh .while other sections have a very nice mesh like this video .could you plz tell me how can i fix this problem?
I have a question about that why we are selecting top and bottom edges as inlet boundary condition ? In some applications, generelly no-slip boundary condition is prefered top and bottom. But in this example you didn't, is there any special reason about that ?
Great video! Was wondering if you could help me out? I’m trying the same method for a non symmetrical NACA 4412 and the mesh is failing at the end? It works for 4/6 quadrants but 2 of them a left blank?
For everyone who will encounter the following ERROR🛑s, when generating the mesh: ❓Warn.:One or more faces with map mesh controls failed to be mapped mesh. ❓Warn.:Some boundaries of protected topologies have been defeatured. Right click on this message and select "Show Problematic Geometry" to see the affected edges. 🛑Error:One or more entities failed to mesh. The mesh of the bodies containing these entities may not be up-to-date. However, meshing might be successful on the other entities. 🛑Error:One or more surfaces cannot be meshed with acceptable quality. Try using a different element size or virtual topology. ❓Warn.: The specified defeaturing tolerance was found to be larger than a specified size. The elements on one or more edges may be defeatured out. I just found out that I've missed to click [Behavior| Hard] in one of my Mesh Sizings (I didn't clicked that in "aerofoil-top") When I changed there [Behavior] to [Hard] the mesh has generated successfully!
YOU ARE THE DAMN BEST!!!!!! Been struggling for a few hrs on my hw and with your video I learned how to do a solid mesh within minutes. THANK YOU!! 🙌🏽🙌🏽🙌🏽🙌🏽
Thank you so much! Couldn't have done my project without these detailed videos
Very well explained. Definitely great help for the beginners.
hey. i did all things exactly like this video but section that is behind of airfoil has a trouble mesh .while other sections have a very nice mesh like this video .could you plz tell me how can i fix this problem?
Thank you for your lessons!
hey. i did all things exactly like this video but section that is behind
of airfoil has a trouble mesh .while other sections have a very nice
mesh like this video .could you plz tell me how can i fix this problem?
taking me forever to generate mesh
hey. i did all things exactly like this video but section that is behind of airfoil has a trouble mesh .while other sections have a very nice mesh like this video .could you plz tell me how can i fix this problem?
I could not get my mesh to form to save my life. This is a great tutorial, but the only way I could continue was if I changed my mesh to "soft." After zooming in, the mesh still looks fine, but things look a little crazy in the middle two quadrants (still quadrilaterals though).
hey. i did all things exactly like this video but section that is bottom of airfoil has a trouble mesh .while other sections have a very nice mesh like this video .could you plz tell me how can i fix this problem?
The Quad Mesher failed on one face or more. what does that mean? How to solve it?
Did you manage to fix this? Encountering the same issue
@@nuusain996 Did you manage to fix it?
I have the same issue, but later I notified that my airfoil trailing edge is not converged (::|) as they do here(>). Now it works perfectly.
@@sharukumar404 hey. i did all things exactly like this video but section that is behind of airfoil has a trouble mesh .while other sections have a very nice mesh like this video .could you plz tell me how can i fix this problem?
I have a question about that why we are selecting top and bottom edges as inlet boundary condition ? In some applications, generelly no-slip boundary condition is prefered top and bottom. But in this example you didn't, is there any special reason about that ?
Great video! Was wondering if you could help me out? I’m trying the same method for a non symmetrical NACA 4412 and the mesh is failing at the end? It works for 4/6 quadrants but 2 of them a left blank?
For everyone who will encounter the following ERROR🛑s, when generating the mesh:
❓Warn.:One or more faces with map mesh controls failed to be mapped mesh.
❓Warn.:Some boundaries of protected topologies have been defeatured. Right click on this message and select "Show Problematic Geometry" to see the affected edges.
🛑Error:One or more entities failed to mesh. The mesh of the bodies containing these entities may not be up-to-date. However, meshing might be successful on the other entities.
🛑Error:One or more surfaces cannot be meshed with acceptable quality. Try using a different element size or virtual topology.
❓Warn.: The specified defeaturing tolerance was found to be larger than a specified size. The elements on one or more edges may be defeatured out.
I just found out that I've missed to click [Behavior| Hard] in one of my Mesh Sizings (I didn't clicked that in "aerofoil-top")
When I changed there [Behavior] to [Hard] the mesh has generated successfully!
what is the configuration of your computer
my airfoil have thickness at trailling edge how can overcome this problem???
hello sir, with the help of this video I am trying to make on NACA-0021 airfoil, but the problem faced in face meshing can u plz solve my difficulty
ty !!! useful to learn