Just updated my CR-6 SE to the latest firmware, found here: forums.crealit... BE SURE to update your LCD firmware as well!! LCD Firmware Update Video: • CR-6 SE LCD Firmware F...
I like the "realness" of your experience, I bet a ton of people have stared at the "End" waiting for the LCD to complete flashing. It looks like they have released a new firmware a few days ago that increases the timeout of the LCD.
Incase anyone needs to know. The micro-SD for the screen firmware flash has to be 16GB or less and HAS to be formatted to FAT32 at 4096mb block allocation. Otherwise it won't actually download the files to the screen memory and install. For the mainboard flash the block allocation can be default of 4096mb, but has to be 32GB or less and FAT32 format.
Thank you!!! I was about to comment saying the same. I normally have my PC volume around 6-8 but had to crank up to 50 to hear your voice but the background thumping was awful.
Mine only arrived 2 days ago. with FW 1.02. All I have done is tightened nuts and bolts, and calibrated e-steps to get a 19.9x 20.0x20.0 calibration cube and then printed out a Q-code cover which fitted perfectly. So onward and upwards. Looks like I will be doing the firmware tonight. Thanks for the info.
@@TheOverExtrudedHuman Yes I have subscribed to your channel.Carry on the good work. I am progressing in little steps at a time. Print count is two calibration cubes to set e-steps and one of two cable retainers. The first covers the x axis Q code square ant took 3 hours without incident with a few whisks and a couple of small zits. All good so far
I just found your channel today and became a subscriber. I like your informative style of content with bits of humor! Keep up the great job. You did say you were going to make a video about your PSU fan upgrade? BTW, I shared your video with two Facebook groups, Creality CR 6 SE / MAX Community and Creality CR-6 SE/CR-6 MAX Official User Group. You should consider joining. It may help increase your subscription count.
Thank you so much! I really appreciate your praise and comments. Also thank you for sharing! I will look into those groups right away. And yes, I am putting together a video now for the PSU fan test and "upgrade".
@@TheOverExtrudedHuman Can't wait to see that video. Would you happen to know the CFM output of the heatsink fan above the nozzle? There are many 24v fans on Amazon, but not knowing the CFM output makes it difficult to purchase the right one and make it quiter.
It is a "DynamiteRC" kit. Link to Amazon product page: www.amazon.com/Dynamite-Startup-Tool-Set-ECX/dp/B00EKJ4UOO/ref=sr_1_2?dchild=1&keywords=dynamite+rc+tool+kit&qid=1607978481&sr=8-2
What slicer program do you run with your printer? I WASN'T able to get the Craelity slicer to work with my machine, & am using the latest version of Cura. When I print on the CR6SE with a Ender3 profile I get BEAUTIFUL prints. When I try the recently added CR6-SE Cura profile the prints are HORRIBLE on my machine! I'd LOVE to get the added build plate volume this machine is capable of, but keep the beautiful prints I've been getting with the Ender3 profile!
I have been using Cura 4.8 Beta in which they added a CR-6 SE profile as well. I agree that there is some sort of difference between the Ender 3 profile and the CR-6 SE one but I'm not sure what it is. As far as build plate volume, you can just change the build size in the profile without touching other settings... In Cura: Settings > Printer > Manage Printers > Select your profile on the left > Click Machine Settings Button > On the Printer tab you can change the dimensions X - 235 Y - 235 Z - 250 Hope that helps!
@@TheOverExtrudedHuman I swear I snapped pics with my camera phone of the Ender3 profile, & transferred them into the CR6-SE profile exactly, but still terrible print results. I must have missed something.
I think I'll have to do my screen flash again, I just rolled back to 1.0.3.2 as the language was stuck on Chinese and the language button didnt work. Your flash of the screen took longer than mine so something must have been missed.
I had to reformat my printer SD card and flash a second time to 2.0.1.2, THEN I flashed the LCD. Remember, when the LCD flash text reads "End!" then you can power off the machine and remove the microSD card from the LCD.
@@yasinergul I havent had the chance to try again yet, but I did notice that some of the .bin files in their zip file have corrupted characters on them. I copied them to the SDcard on my Mac but I noticed that Windows PCs interpret the characters a bit differently - still corrupt but looks different. I'm wondering if that has something to do with it. I'll try again when the current print I've got going finishes.
@@vandit6354 i checked old firmwares as u mentioned some files different letter and characters. as chinese. But even tried the old ver. Same problem occured. Directly end and no lang change. Maybe its about the sd card models
Nice one again, you do need to up your recording volume as you say, but well presented video. do you have a list of all the printing mods we can see on your CR6? love the screen surround, filament drum roller and the bed pull tabs.
@@TheOverExtrudedHuman Thanks Man. Something else annoying about the latest Creality FW ver 2.0.1.2 is that you can only alter Z offset by .5mm at a time instead of going up/down by .1mm. I had worked out my best Z was .23, but am now forced to have .2 or .25 !!!! Flip me Creality are you stupid or what? Who thought that was a good idea, and along with the stupid blanking of the screen after 30 secs....OMG Just awful. Going back to the Community FW Flash
I'm using the V2.0.1.3 DWIN_SET screen firmware from the same link above, but the top line reads V1.4 2019.04.18 when I flash. Any idea why it's not reading 3.4 as shown in your video? The entire process runs, copies 25 files then displays End.
Thanks. First off, Udh the display going off is going to be annoying as hell. There really should be an "option" to either set it as the desired amount or toggle it off completely. I do get it though. We do some really long prints that can run for days, so a timed shut-off isn't a bad thing? Dunno if these screens are susceptible to burn-in or not? I've contacted Creality just about the known USB, language, and other issues reported. Got the typical "canned" responses - literally no help. Had also asked about having to only use a fat 32 8GB card. Again, no answer, but others seem to say yes. For some reason the board and display can't handle a larger card (of course I have a 32 gig that's useless for this. Also, goo to realize that I believe that the card has to be somewhat sacrificial. Meaning: That you need to reformat it and the only thing on it would be the .bin and dwin folder. Anyone posting and showing their process is a great help, so thank you again. I'll be doing this once my measly 8G micro card arrives.
@@TheOverExtrudedHuman , you're most welcome. I did the most recent update, and oddly my screen just dims, and does not turn off completely. Anyway, I'm hoping that they are fairly aggressive in the updates, as there is so much to "tweak" Might look into the Marlin updates as well.
I've tried to switch to the latest firmware. After mainboard upgrade everything in Chinese as well, so I went for the LCD update too. Unfortunately it always crashed after HZK when it shows the ICL line. Screen switches off and nothing happens. Printer is still running but a part of the texts in the menu seem to be missing now. Any idea?
Hey Dennis, I will be putting out a firmware update video specifically for the CR-6 SE in the coming week or two. Still playing catch up after Thanksgiving.
I have tried about 6 times to upgrade my screen firmware. Already tried of removing the cable or working around it. So, I got out my handy-dandy small saw and cut the plastic end, near the cable (with the cover off the screen, of course) and now I have a slot for removing the cover without unplugging the cable. And can insert micro SD without unplugging cable to insert. and slip the over back on.
I bought a Micro SD extension cable on Amazon, and I'm going to print a new LCD back cover that has a slot for the cable to come out from the board connection. I will be able to plug in the card without removing everything to get to the card slot. That should make future firmware updates easier. That is, if I don't upgrade to the BTT TFT50 first.. lol
It’s contained in the same ZIP file as the main board firmware. It’s in the folder named DWIN something. I put a link to another video in the description
Upgrading from 1.0.2, I got the MB firmware to update. But my 1 day old CR-6 would not read from the micro SD. Went backwards to 1.0.3.6, but still would not read screen firmware. Lucky not a lot has changed between 1.0.2 and 1.0.3.6 Stuck sort of. Can operate by not get to new one. New one has screen saver. People have asked Creality to remove screen saver for next update to 2.x
There are certain restrictions on the card you use. It has to be less than 32GB, recommended 8GB. And it has to be formatted using FAT32 and 4096 bytes allocation size. This is in the firmware documentation for the latest release. I am in the process of creating a firmware flashing video for the CR-6 SE.
@@TheOverExtrudedHuman I am using a 32GB card but 4096 bytes for allocation is not an option for me. I have tried a few other sizes and the files are not found when I insert the card and turn the printer on. Also, the DWIN folder is inside another DWIN folder...do you need both? I have tried both ways and the files aren't found so I figured I would ask so I can eliminate at least 1 problem.
I dont like the screensaver, for what: electricel power saving? I will have it, because I watch with camera on my cellphone, watching also the progressbar. Greetings!
Thanks for leaving a comment! And the thing is, there's no setting! We're just stuck with this screen saver feature. My guess is that it's for preventing burn in on the screen.
@@TheOverExtrudedHuman This was my assumption as well, the screen isn't exactly top-of-the-line. I'd love this as a setting, though, because I like to check the progress every now and then, but the rest of the time, it's just an annoying lightsource that I can't turn off. I've printed a cover to mitigate that for now (not going to update to this version, since it seems to have a ton of issues and doesn't have any features that the community firmware doesn't, so doesn't make sense to update to this just for the screen saver), but a screen timeout setting would be a nice thing for Creality to add.
me neither. The changed it from 30 seconds to 10 minutes in the latest firmware but they also acknowledged that we would like a switch to turn the function on/off. So that my be in the next firmware update.
Whats the deal with all this hassle when my printer works great with the stock firmware ? As Long the print quality is the same i will stick to stock firmware
I completely understand. You don't have to upgrade the firmware if you don't want to. I do it because I like to be on the latest. Also to educate those that want to see if it's worth it. :)
That's silly attitude to have. As a engineer myself, patches/updates/firmware updates are essential. They there for a reason which is to fix bugs or issues with the code.
There is one change that I think warrants updating the firmware and that is that in the new version the bed leveling mesh is stored on the main board rather than on the SD Card. So if you swap between a bunch of cards, you don't have to always remember to copy the mesh data to all of your cards. Other than that, your right, if prints really well out of the box.
I tried to update today. I got the Chinese on mine too. I unzipped what I hope is the info for the screen but it doesn't do anything. Dwin_set is the file that I think is for the lcd
Hey Danny, thanks for commenting and I'm sorry for your trouble. When you flash, make sure that you wait for the finished message and also be sure to remove the uSD card. Check your connections as well.
Hi, on the screen display update. Mine immediately says END! And all numbers say files:000. What did your SD card have on it? I copied the DWIN_SET file with all the stuff in it. It was the only file on the card.
Mine did the same. Turns out when the file unzipped it put the DWIN_SET folder inside another DWIN_SET folder. So what got copied to the SD card was \\DWIN_SET\DWIN_SET\then all the files. I deleted the top level folder and it worked perfectly. Be patient. It took close to 2 minutes to complete and the screen went blank once for about 10 seconds.
@@billysgeo Thanks for commenting! When you home your printer, it may or may not be at the correct height for optimal printing. The Z Offset will allow you to move the print head closer or further away from the bed in small increments. Too close and the layers will be too squished together... too far away and the print won't stick to the bed and the layers won't fuse together. I hope that helps.
Stupid question but should I update to the newer version? I don’t like the screen saver and when there are only text changes in the menu I don’t think it’s worth it. Or is there any changes to print quality or something important?
I like the "realness" of your experience, I bet a ton of people have stared at the "End" waiting for the LCD to complete flashing.
It looks like they have released a new firmware a few days ago that increases the timeout of the LCD.
Thanks Chris! Much appreciated!
Incase anyone needs to know. The micro-SD for the screen firmware flash has to be 16GB or less and HAS to be formatted to FAT32 at 4096mb block allocation. Otherwise it won't actually download the files to the screen memory and install. For the mainboard flash the block allocation can be default of 4096mb, but has to be 32GB or less and FAT32 format.
Thank you T0MM! This is 100% true as per the firmware flashing documentation.
OMG sorry for the horrible sound! That's it, I'm getting a better microphone. **WARNING** Sound varies throughout the video.
Thank you!!! I was about to comment saying the same. I normally have my PC volume around 6-8 but had to crank up to 50 to hear your voice but the background thumping was awful.
now at 100. keep up the good content
Were you the 100th?? If so thank you so much!!
Found it! They finally posted patch notes.
forums.creality3dofficial.com/community/cr-6-se/cr-6-se-v2-0-1-2-updated-firmware/
Mine only arrived 2 days ago. with FW 1.02. All I have done is tightened nuts and bolts, and calibrated e-steps to get a 19.9x 20.0x20.0 calibration cube and then printed out a Q-code cover which fitted perfectly. So onward and upwards. Looks like I will be doing the firmware tonight. Thanks for the info.
Thanks for commenting! Hopefully you subscribe to my channel so you can see more videos on the CR six
@@TheOverExtrudedHuman Yes I have subscribed to your channel.Carry on the good work. I am progressing in little steps at a time. Print count is two calibration cubes to set e-steps and one of two cable retainers. The first covers the x axis Q code square ant took 3 hours without incident with a few whisks and a couple of small zits. All good so far
Subbed. Exactly what we needed
Thank you!
I just found your channel today and became a subscriber. I like your informative style of content with bits of humor! Keep up the great job. You did say you were going to make a video about your PSU fan upgrade? BTW, I shared your video with two Facebook groups, Creality CR 6 SE / MAX Community and Creality CR-6 SE/CR-6 MAX Official User Group. You should consider joining. It may help increase your subscription count.
Thank you so much! I really appreciate your praise and comments. Also thank you for sharing! I will look into those groups right away. And yes, I am putting together a video now for the PSU fan test and "upgrade".
@@TheOverExtrudedHuman Can't wait to see that video. Would you happen to know the CFM output of the heatsink fan above the nozzle? There are many 24v fans on Amazon, but not knowing the CFM output makes it difficult to purchase the right one and make it quiter.
Thx for the vid ! Just got one yesterday and am assembling it tonight. Do the updates address any specific issues ?
Nice video! What are the yellow tiles that you have on your printer? Where are they from? Do you have the stl files? Thanks!
Whats the screwdriver you use btw? That looks way more ergonomic than the standard allen wrenches lol
It is a "DynamiteRC" kit. Link to Amazon product page:
www.amazon.com/Dynamite-Startup-Tool-Set-ECX/dp/B00EKJ4UOO/ref=sr_1_2?dchild=1&keywords=dynamite+rc+tool+kit&qid=1607978481&sr=8-2
What slicer program do you run with your printer?
I WASN'T able to get the Craelity slicer to work with my machine, & am using the latest version of Cura. When I print on the CR6SE with a Ender3 profile I get BEAUTIFUL prints. When I try the recently added CR6-SE Cura profile the prints are HORRIBLE on my machine! I'd LOVE to get the added build plate volume this machine is capable of, but keep the beautiful prints I've been getting with the Ender3 profile!
I have been using Cura 4.8 Beta in which they added a CR-6 SE profile as well. I agree that there is some sort of difference between the Ender 3 profile and the CR-6 SE one but I'm not sure what it is. As far as build plate volume, you can just change the build size in the profile without touching other settings...
In Cura:
Settings > Printer > Manage Printers > Select your profile on the left > Click Machine Settings Button > On the Printer tab you can change the dimensions
X - 235
Y - 235
Z - 250
Hope that helps!
@@TheOverExtrudedHuman I thought I did that. I think it still has a keep out area, that prevents the full build potential from being realized.
There is still a keep out area where the bed clips go on the Ender3 would be.
@@TheOverExtrudedHuman I swear I snapped pics with my camera phone of the Ender3 profile, & transferred them into the CR6-SE profile exactly, but still terrible print results. I must have missed something.
I'll have to do some testing... do you have a particular model that gives you the most issues? I will see what I can come up with.
I think I'll have to do my screen flash again, I just rolled back to 1.0.3.2 as the language was stuck on Chinese and the language button didnt work. Your flash of the screen took longer than mine so something must have been missed.
I had to reformat my printer SD card and flash a second time to 2.0.1.2, THEN I flashed the LCD. Remember, when the LCD flash text reads "End!" then you can power off the machine and remove the microSD card from the LCD.
same problem did u solve?
@@yasinergul I havent had the chance to try again yet, but I did notice that some of the .bin files in their zip file have corrupted characters on them. I copied them to the SDcard on my Mac but I noticed that Windows PCs interpret the characters a bit differently - still corrupt but looks different. I'm wondering if that has something to do with it.
I'll try again when the current print I've got going finishes.
@@vandit6354 i checked old firmwares as u mentioned some files different letter and characters. as chinese. But even tried the old ver. Same problem occured. Directly end and no lang change. Maybe its about the sd card models
Solved, when you format sd card, make fat 32 and blok 4000 byte
Nice one again, you do need to up your recording volume as you say, but well presented video. do you have a list of all the printing mods we can see on your CR6? love the screen surround, filament drum roller and the bed pull tabs.
@wasp0 I will put up a list for you so you can see. I think they are attached to another video somewhere but I will put them here too.
Screen Bezel:
www.thingiverse.com/thing:4616111
Bed Pull Tabs / Handles:
www.thingiverse.com/thing:4617961
Filament Guide (between filament runout sensor and extruder):
www.thingiverse.com/thing:4594094
Filament Spool Roller / Holder:
www.thingiverse.com/thing:4594094
@@TheOverExtrudedHuman Thanks Man. Something else annoying about the latest Creality FW ver 2.0.1.2 is that you can only alter Z offset by .5mm at a time instead of going up/down by .1mm.
I had worked out my best Z was .23, but am now forced to have .2 or .25 !!!! Flip me Creality are you stupid or what? Who thought that was a good idea, and along with the stupid blanking of the screen after 30 secs....OMG Just awful. Going back to the Community FW Flash
I'm using the V2.0.1.3 DWIN_SET screen firmware from the same link above, but the top line reads V1.4 2019.04.18 when I flash. Any idea why it's not reading 3.4 as shown in your video? The entire process runs, copies 25 files then displays End.
Keep trying, you'll get the hang of everything eventually.
Great video
Thanks for commenting! Please like, subscribe and share.
I sure did subscribe. Same thing back at you my friend
Were do you get LCD screen update at?
Thank god you weren't the director of Gone With the Wind...
Not sure what I'm going wrong but I copied DWIN_SET folder to the card and put it in, but when it was loading it was showing 0 for all the files.
Thanks.
First off, Udh the display going off is going to be annoying as hell. There really should be an "option" to either set it as the desired amount or toggle it off completely.
I do get it though. We do some really long prints that can run for days, so a timed shut-off isn't a bad thing? Dunno if these screens are susceptible to burn-in or not?
I've contacted Creality just about the known USB, language, and other issues reported. Got the typical "canned" responses - literally no help.
Had also asked about having to only use a fat 32 8GB card. Again, no answer, but others seem to say yes. For some reason the board and display can't handle a larger card (of course I have a 32 gig that's useless for this.
Also, goo to realize that I believe that the card has to be somewhat sacrificial. Meaning: That you need to reformat it and the only thing on it would be the .bin and dwin folder.
Anyone posting and showing their process is a great help, so thank you again. I'll be doing this once my measly 8G micro card arrives.
Thanks for the kind words! Also the latest firmware (2.0.1.3) changes the screen timeout to 10 minutes! Upgrade if you can.
@@TheOverExtrudedHuman , you're most welcome. I did the most recent update, and oddly my screen just dims, and does not turn off completely.
Anyway, I'm hoping that they are fairly aggressive in the updates, as there is so much to "tweak"
Might look into the Marlin updates as well.
I've tried to switch to the latest firmware. After mainboard upgrade everything in Chinese as well, so I went for the LCD update too. Unfortunately it always crashed after HZK when it shows the ICL line. Screen switches off and nothing happens. Printer is still running but a part of the texts in the menu seem to be missing now. Any idea?
Hey Dennis, I will be putting out a firmware update video specifically for the CR-6 SE in the coming week or two. Still playing catch up after Thanksgiving.
I'm currently running into this same problem. Did you find a fix Dennis?
How did you attach the filament spool holder? That's not the stock placement right? Can you provide the files?
It's a file on thingiverse.
I have tried about 6 times to upgrade my screen firmware. Already tried of removing the cable or working around it. So, I got out my handy-dandy small saw and cut the plastic end, near the cable (with the cover off the screen, of course) and now I have a slot for removing the cover without unplugging the cable. And can insert micro SD without unplugging cable to insert. and slip the over back on.
There may be some slack cable in the area containing the main board. I will be putting together a firmware flashing video soon!
I bought a Micro SD extension cable on Amazon, and I'm going to print a new LCD back cover that has a slot for the cable to come out from the board connection. I will be able to plug in the card without removing everything to get to the card slot. That should make future firmware updates easier. That is, if I don't upgrade to the BTT TFT50 first.. lol
What the different with V1.0.2 ?
Hi, how long have you done the capricorn bowden? thanks
So we’re to you get updates for LCD screen? Or is it the same as the firmware for the board?
It’s contained in the same ZIP file as the main board firmware. It’s in the folder named DWIN something. I put a link to another video in the description
Were you able to find the information?
@@TheOverExtrudedHuman
I did on the firmware for the board but the LCD screen I didn’t.
Yes thank you so much
Upgrading from 1.0.2, I got the MB firmware to update. But my 1 day old CR-6 would not read from the micro SD. Went backwards to 1.0.3.6, but still would not read screen firmware. Lucky not a lot has changed between 1.0.2 and 1.0.3.6 Stuck sort of. Can operate by not get to new one. New one has screen saver. People have asked Creality to remove screen saver for next update to 2.x
There are certain restrictions on the card you use. It has to be less than 32GB, recommended 8GB. And it has to be formatted using FAT32 and 4096 bytes allocation size. This is in the firmware documentation for the latest release. I am in the process of creating a firmware flashing video for the CR-6 SE.
@@TheOverExtrudedHuman I am using a 32GB card but 4096 bytes for allocation is not an option for me. I have tried a few other sizes and the files are not found when I insert the card and turn the printer on. Also, the DWIN folder is inside another DWIN folder...do you need both? I have tried both ways and the files aren't found so I figured I would ask so I can eliminate at least 1 problem.
I dont like the screensaver, for what: electricel power saving? I will have it, because I watch with camera on my cellphone, watching also the progressbar. Greetings!
I as well like to see the progression percentage as the print progresses.
Thanks for leaving a comment! And the thing is, there's no setting! We're just stuck with this screen saver feature. My guess is that it's for preventing burn in on the screen.
@@TheOverExtrudedHuman This was my assumption as well, the screen isn't exactly top-of-the-line.
I'd love this as a setting, though, because I like to check the progress every now and then, but the rest of the time, it's just an annoying lightsource that I can't turn off. I've printed a cover to mitigate that for now (not going to update to this version, since it seems to have a ton of issues and doesn't have any features that the community firmware doesn't, so doesn't make sense to update to this just for the screen saver), but a screen timeout setting would be a nice thing for Creality to add.
me neither. The changed it from 30 seconds to 10 minutes in the latest firmware but they also acknowledged that we would like a switch to turn the function on/off. So that my be in the next firmware update.
What size memory card did you use for the screen flash?
Not sure what he used, but I used a 16gb micro sd for mine. I think any bigger than that it will give you grief because it doesn't format correctly.
Whats the deal with all this hassle when my printer works great with the stock firmware ? As Long the print quality is the same i will stick to stock firmware
I completely understand. You don't have to upgrade the firmware if you don't want to. I do it because I like to be on the latest. Also to educate those that want to see if it's worth it. :)
That's silly attitude to have. As a engineer myself, patches/updates/firmware updates are essential. They there for a reason which is to fix bugs or issues with the code.
There is one change that I think warrants updating the firmware and that is that in the new version the bed leveling mesh is stored on the main board rather than on the SD Card. So if you swap between a bunch of cards, you don't have to always remember to copy the mesh data to all of your cards. Other than that, your right, if prints really well out of the box.
I tried to update today. I got the Chinese on mine too. I unzipped what I hope is the info for the screen but it doesn't do anything. Dwin_set is the file that I think is for the lcd
HI can you do a step by step on how to update the software on the screen as i have all Chinese!!!
Yooooo it tells us you gotta flash the lcd too I had a huge issue with this update at first because micro sad wasn’t working well
I am putting together a firmware flashing video soon!
I did it and the screen dosent work or turn on now
Hey Danny, thanks for commenting and I'm sorry for your trouble. When you flash, make sure that you wait for the finished message and also be sure to remove the uSD card. Check your connections as well.
@@TheOverExtrudedHuman i did wait for the finibsh message i will check the conection now
I got it working it was the 6.q communaty firmware was the problem the 5 and 6 4 3 all worked except the 6.1 but its working now
@@dannythorne9761 sorry I haven’t used the community firmware. Glad you got it working!
@@TheOverExtrudedHuman thank you
Next time just read the documentation prior starting any update process. :)
That's the plan! :)
hi sorry, this firmware is for 32bit card? do you have the 32-bit card?
Thanks for commenting! Yes I do have a 32 bit board
@@TheOverExtrudedHuman bad leveling fix?
한국은 한국어 버전으로 출시 돼었숩니다.
Cr-6 se 출시 얼마 안됌
Hi, on the screen display update. Mine immediately says END! And all numbers say files:000. What did your SD card have on it? I copied the DWIN_SET file with all the stuff in it. It was the only file on the card.
format your micro-SD to block allocation size of 4096mb. I just went through your pain and found the answer on a random reddit post.
@@t0mm770 thanks so much, I'll give that a try.
Make sure it's FAT32 and 4096 blocks. Also do add a volume name. That last part was what stumped me.
@@codemonkey2k5 dang. good catch. silly it requires a volume name. Just didnt notice since I always give generic names when I format.
Mine did the same. Turns out when the file unzipped it put the DWIN_SET folder inside another DWIN_SET folder. So what got copied to the SD card was \\DWIN_SET\DWIN_SET\then all the files. I deleted the top level folder and it worked perfectly. Be patient. It took close to 2 minutes to complete and the screen went blank once for about 10 seconds.
instead of Z= 0.20 you have 0.25; is it the firmware or your setting ?
Thanks for commenting. It’s my setting.
@@TheOverExtrudedHuman Hello. How does the offset affect your print?
@@billysgeo Thanks for commenting! When you home your printer, it may or may not be at the correct height for optimal printing. The Z Offset will allow you to move the print head closer or further away from the bed in small increments. Too close and the layers will be too squished together... too far away and the print won't stick to the bed and the layers won't fuse together. I hope that helps.
@@TheOverExtrudedHuman Thank you for the explanation. So, it's the same thing as the Initial Layer Height in Cura, but in "hardware" right?
Stupid question but should I update to the newer version? I don’t like the screen saver and when there are only text changes in the menu I don’t think it’s worth it. Or is there any changes to print quality or something important?