Put lemon On Your Electrical Soldering Iron And Admire Results
HTML-код
- Опубликовано: 9 фев 2024
- Clever! Put Lemon on your electrical soldering iron and admire the results
This video shows how to repair electric soldering iron using only salt. Put salt on your electric soldering iron and you will be amazed by the results. This is the best way to use electric soldering iron.
electric soldering, how to solder, repair with solder, how to repair soldering iron, how to clean soldering iron,
Inventor 101 #howto #soldering  
Хобби
New tips are only a couple $'s at the most. Soldering iron tips have a coating on them, once it's removed they are worthless. Don't do this or use sand paper on them. If you want to keep your tip in good condition, dip it in flux before you solder. And then after you're done, dip it again and melt solder on it before it cools. My tips last well over 5 years, with regular use, doing that.
And even then, tip refresher costs you a couple bucks and works like a charm, it cleans in a non destructive manner
@@fL0p That's cool, I didn't even know there was such a thing.
Yeah I said sand paper first. Or coca cola
@@fL0p keep your iron clean with sal amoniac like they show you in metal shop high school
I just use a piece of sandpaper in lightly sand to tip my soldering iron to get the oxidation off and then dip it in soldering flux saved a lot of time compared to doing 12 volt electrolytes
I suggest using a copper brillo pad.
Most tips have a copper core with iron, nickel and chrome plating. Sanding or using a file will destroy your tips.
@@richphoenixpa"copper" Brillo brand pads are copper plated steel wool. Get a brass cleaner or a sponge designed for soldering.
@@TekWar98 I couldn't remember if was copper or brass... but the point is that it's usually what we use.
@@TekWar98 soldering iron tips are consumables. And sand lightly just enough to clean the crud off. although I have a couple that I have taken a file to a reshaped them down to very thin points because I needed to tips are relatively cheap.
Hello, I wish you continued success. ☺️
How about just clean the tip with a file or emery cloth. Works perfect
Great video 😍😍
So you did 12volt electrolysis?
Yep, and he didn't even tell which + or - wire to connect to soldering tip 👎🤦♂️
@@fffUUUUUU If you look carefully, he attaches the wire with the white stripe to the soldering tip, which is usually the positive.
@@fffUUUUUUimages.app.goo.gl/7yvDcZgeRiEz3KFYA
YW
Great prison content !.
Nice, i love
So thanks sir. ...!!!
cool, i thought you were going to whipe it with lemon juice
Nice ❤❤👍👍👍
Nice tricks
Nomber 1
Sandpaper or a wire brush works just as good. But there is paste that is specifically made to tin your tip or regular soldering paste or Flux works just as effectively. You should have soldering paste around always anyway. It ensures a good solder flow and connection. This process here is unnecessary work, which accomplishes the same thing.
This is really informative and useful. Thank you for this amazing video.
I use a brass wire brush when the iron is hot, it takes about 15 seconds
My wife said to clean the tip before use but the wire brush is a little rough on my tip, lol
Nice 👍
It didn't even improve the performance of the tip 😩
There are plenty of videos out there showing how to clean a soldering iron tip properly.
De que tipo de metal es el tornillo
Can you make stand dc motor fan please😊😊😊😊😊
You could have got the same results in about 2 minutes with a wire wheel
👍😀
It's freaky hey
The short-sighted philistines who always sneer "Just go buy another one" at your experiments just don't get it. If they could think outside the butt, they'd understand that you're using a visual format to demonstrate basic, solid principles that are damned useful. I've been adapting your various techniques for my own bimbo-rigged projects, and they give me a real edge--like, this knowledge has possibilities. I go digging around for old artifacts, and if I ever need to clean up some badly corroded metal geegaw, this method might be just what I need. Thanks!
Are you idf bot? Why do you use philistine as an insult?
Sand paper...
why water has turned green....which compound is it
Copper sulfate?
Yes copper@@MoviesByeMark
😂😂 bro you damage minimum 50 -70 rupees charger, wasted more than 2 hours of your life to clean a bit, simply use a normal file to rub the tip and user iron without issue that or why didn't buy a 20 rupees iron bit . That problem happen after every 2-3 days of use iron if you are a regular user so every time do this again and again bravo 👏👏👏
he didn't even tell which + or - wire to connect to soldering tip 👎🤦♂️
So... basically you produce a very diluted bleach (sodium hypochloride) for cleaning the soldering rod?
I supose that this sodium hypochloride reacts with any metal that is covering the surface of the rod?
টিভি টিক করা সোল্ডারিং আয়রন ভালো
Please nobody try this
Skeerd! It's too dangerous 😜🤣
Easier and quicker to wipe it off on a wet paper towel after every use.
It's annoying and they know what there doing. This channel only do these videos for engagement
oye, one thing I notice is they don't use any flux. flux is acidic and used to clean the surfaces of oxidation and allow the solder to 'wet' the contract surface (regardless if it's the thing you're trying to solder or the iron itself). as for the electrolysis, if it was being used to 'resurface' an iron, I could see it, but it's usually a lot better (for temperature control) to just replace the head since it's important to have an exact thickness of the iron head to have accurate temp control.
Hellow i am first comment ❤
Zu idakani yayama vu
Hello I Am Underwater 🫠
সবাই ভালো আছো🥰
Just use a sandpaper or if you have hobby Dremel use a polishing discs. Why do you so complicated 🤔
No, no and NO! See above reply!
This video should be banned. This is extremely dangerous
This guy is as lazy as they come. A piece of sand paper will be faster than standing around waiting for it soak. But if you're lil arms can't do that little bit of work. This would be still faster than his way. Soak it in coca- cola
Awesome all your advices Inventor101,i send you a gretting👋🏻
Thanks for 129 subscriber please support ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤