It’s a neat enough idea, and I like the concept of a portable vise 👍 ...my only remark is that you should wire brush a surface before welding, you will get a lot better welds that way, and it’s never a good idea to weld on a rusty surface, even if it’s just surface rust.
You are the first one i have ever seen someone use a car jack for a vice dam that's so cool and my wife has two of them lol. And thanks for giving me a nother look at what i can do with a car jack.
Excellent tool you have created. If I were to replicate this I believe I would extend the length of the end cap so that it can increase the size of objects it can hold. Might as well get the minimum and maximum distance out of the jack.
I thought about making a log splitter out of a scissor jack kinda the same concept you have but instead of two flat points I was going to add a wedge .sure would beat swinging an Axe .
I like the idea. I have a 6.5" Wilton bench vise and sometimes it's just not big enough. But why did you weld the bottom of the outer jaw? If something HAS to lay flat it can't?
I was struggling to think of an advantage this was over a regular vise but this makes sense. Now I want both jaws mounted on a longer frame with the fixed jaw adjustable via a series of holes.
Toti ce-i interesați este bine să vada daca sunt meseriași. Aici vor găsi multe rezolvări tehnice. Eu le multumesc celor care au muncit pentru prezentare.
nice but only works if you know how to weld, i always wanted to learn how to weld, even in high school but one look at my shaky hands and the teacher said it could never happen , now i'm 66 and still would like to learn, tried getting lessens in my late 20's everybody just said dont bother sighing up here for classes with those hands. anybody that can weld you all so lucky
Some people make things simply because they can and to show others that you can turn something into something else that's useful. Others sometimes make things like this to be resourceful by way of using things that otherwise wouldn't be used for much and in some cases would be thrown in the trash but now can be repurposed. As for me and many others who don't have much money, videos like this help to show how to compensate when you just aint got the money to go buy a vice but yet we have left over stuff from when we took what we could off a vehicle before scrapping it and then also having some small misc pieces of flat stock laying around in order to fabricate with.
For smaller work you could use a vice. Generally the problem with a vice is the height it is mounted at. You end up working at a level that is not as comfortable as it could be. A holding fixture like this is portable and could be used on a table or the floor to be able to use both hands with the tool being used at or below your waist. Also could be made larger than a 4-6" vice for a lot less. Cutting, grinding and welding require less clamping force than other types of work. You have to remember that that type of jack is used to raise cars so it does provide more clamping force than you think. Great tool from cheap parts.
valveman12 the log splitter idea is good. I thought of making the press as there not cheap to buy. With the log splitter if u welded a good size nut onto the winding end u cud use a drill to operate it😃
His talent is admirable ... this is the gift of God in your life. Congratulations. Brazil. (É de admirar seu talento...isto é dom de Deus na sua vida. Parabéns. Brasil).
Very cool idea But you messed up on the handle It won't work with longer material The handle need to be able to slide so its not on the way. What u think¿
I find it interesting that the inch isn't as dead as it is touted to be. Square with MM on top and inches on the bottom with the conversion factor on the body. Long live the inch.
In Australia, I've happily converted to the metric system----Some things became a bit weird though, for instance: "I'll beat you within 25.4 millimeters of your life!" "Give 25.4 millimeters and they'l take 1.6094 kilometers"
The first thing I do when I get a new (or used) car is replace the scissor jack with an hydraulic. Considered them useless and dangerous until I watched this. Nice job.
![Yeat & Quavo - 5BRAZY [Official Music Video]](http://i.ytimg.com/vi/4XxnTAwyxus/mqdefault.jpg)
Awesome!!! I like that. Of course I’m making one. 👍👍👍👍
simple and easy to make..thanks for sharing🤝
I really like the idea, portable vise that doesn't fall over and isn't top heavy, GREAT VIDEO
ruclips.net/video/eSg1mw0yO4M/видео.html
Kudos man, do not mind dissenting views. That is life. You are resourceful and that is it. Thumbs up and ride on!
Ben.
ONOKOHONONOKCKOWEMU. LET ME GUESS . YOUR IRISH.
It’s a neat enough idea, and I like the concept of a portable vise 👍 ...my only remark is that you should wire brush a surface before welding, you will get a lot better welds that way, and it’s never a good idea to weld on a rusty surface, even if it’s just surface rust.
As a welder of over 40 yrs just stick weld it with higher than normal amps..
Complimenti bella idea. Saluti da Adria - Bubi -
You are the first one i have ever seen someone use a car jack for a vice dam that's so cool and my wife has two of them lol. And thanks for giving me a nother look at what i can do with a car jack.
No he was not the first, the first is in the link below.
ruclips.net/video/eSg1mw0yO4M/видео.html
Ele copiou a ideia de outro.
Great clip! Only downside for me is that I don't do welding :(
Excellent tool you have created. If I were to replicate this I believe I would extend the length of the end cap so that it can increase the size of objects it can hold. Might as well get the minimum and maximum distance out of the jack.
Good idea. Think I will make one tomorrow at work & They will pay me to make it.
i bet it will take you longer than six minutes and fifteen seconds though.
@@jamesha175
Personal prodjects take longer when your getting paid for em'. Lol
@@rs6383 heh, i love it when they pay me to shit too
Was a good COPY!
ruclips.net/video/eSg1mw0yO4M/видео.html
Exelente gracias por compartir
Its a great idea as long as its understood that the more the jack is extended, the more pressure can be exerted with equal applied shaft torque.
Very nice... I need a vise and that would do... Thank you!!!
thats what i call a tradesman good on you mate
Gracias por tu tiempo y compartir saludos
Ele copiou a ideia de um brasileiro
ruclips.net/video/eSg1mw0yO4M/видео.html
Pretty cool!
Always like seeing ways to repurpose stuff that otherwise would often just be thrown in the junk pile and rust away
You could put a socket on the end of that screw and use a drill with the socket adapter
Awesome informational educational video experience Y'alls
I thought about making a log splitter out of a scissor jack kinda the same concept you have but instead of two flat points I was going to add a wedge .sure would beat swinging an Axe .
Great tune AND thingsmagig!
Ingenious. I never would have thought of that. Excellent.
Ingenious COPY
That ideia was not from him.
ruclips.net/video/eSg1mw0yO4M/видео.html
thank you very much man for this great idea, you did me a great service. from Algeria
This ideia was mine
ruclips.net/video/eSg1mw0yO4M/видео.html
I have about 10 of these and still look new, now I'm going to have 10 vises
ОРИГИНАЛЬНО БЫСТРО МАСТЕРУ КЛАСС 👍👍👍
excellent idea!!
why didn't I think of this......
where I live, car jacks are cheaper than bench vices......hahahhah
cheers mate!!
Jos tenan master😄😄😄👍
Excelente idea. Sencilla y práctica.
Exelente copia, ele roubou a ideia
ruclips.net/video/eSg1mw0yO4M/видео.html
👍 Интерес иностранцев, это уже говорит о многом, молодец
I like the idea. I have a 6.5" Wilton bench vise and sometimes it's just not big enough. But why did you weld the bottom of the outer jaw? If something HAS to lay flat it can't?
I was struggling to think of an advantage this was over a regular vise but this makes sense. Now I want both jaws mounted on a longer frame with the fixed jaw adjustable via a series of holes.
That ides was another channel.
ruclips.net/video/eSg1mw0yO4M/видео.html
Great idea .....
Never liked these jacks for lifting.... but this will be great for making clamps aswell.. thanks 👍
is portable tool as well,and can be screwed in a piece of plank ,and cut any size of steel u need,,thanks,,seyabonga,,
Toti ce-i interesați este bine să vada daca sunt meseriași. Aici vor găsi multe rezolvări tehnice.
Eu le multumesc celor care au muncit pentru prezentare.
That is a cool project to make with my everlast welder.
Круто. Просто красавец.
Good idea!
I like it. I want to make one aswell for my work table i made at work.
Welder professionally 40 years , bad on your eyes.
Great Job man 👍👌😀 huge Like 👍👌
I'm going to make one as soon as I find where I've got it stashed in the garage. It will put my powerarc to good use.
ruclips.net/video/eSg1mw0yO4M/видео.html
Mi a go make one all so
simple yet brilliant idea! thanks
Super ideya👌👌👌👌👍👍👍👍👍🌼🌼🌼🌼
I'm making one tomorrow morning first thing 👏👏
Good luck
Amazing idea
Good...👍👍
Bella idea bravo
Gracias, muy buen tutorial!
Good idea. An other project to add to my to do list. 😊
Good COPY.
ruclips.net/video/eSg1mw0yO4M/видео.html
nICE VIDEO BUT THE MUSIC WAS FREAKING ME OUT.
Nice idea...thank you
Nice Copy, this channel stolen my ideia.
ruclips.net/video/eSg1mw0yO4M/видео.html
Ottima idea, bravo!
Ideia de um brasileiro que ele copiou.
ruclips.net/video/eSg1mw0yO4M/видео.html
Bello un lavoro da maestro, ma peccato per la corsa che è poca sarebbe stato ideale per la lavorazione di pezzi più grandi
What's the music in the video... Nice!
Muy bueno amigo 🇦🇷👍🙋
Muy buena copia!
Este fez antes ruclips.net/video/eSg1mw0yO4M/видео.html
Bom trabalho
Bom trabalho de um brasileiro, ele copiou a ideia.
ruclips.net/video/eSg1mw0yO4M/видео.html
Автору спасибо. Дома необходимо,
nice but only works if you know how to weld, i always wanted to learn how to weld, even in high school but one look at my shaky hands and the teacher said it could never happen , now i'm 66 and still would like to learn, tried getting lessens in my late 20's everybody just said dont bother sighing up here for classes with those hands. anybody that can weld you all so lucky
That doesn't mean your hands would shake while welding. Same as people that studder can sing without a problem .
@@bhaws17 i shake constantly i never seen my hands not shake for over 67 yrs doing anyhthing just to type this is a struggle
'
that is a good idea use a screw jack change to clamp vise
Wouldn't you be able to perform the work, that contraption can do, using a vise? Why go to all that trouble to make that?
Looks a lot lighter than a vise of the same size
To get 334000 views... That's why
Looks stronger to me than Vice
Some people make things simply because they can and to show others that you can turn something into something else that's useful. Others sometimes make things like this to be resourceful by way of using things that otherwise wouldn't be used for much and in some cases would be thrown in the trash but now can be repurposed.
As for me and many others who don't have much money, videos like this help to show how to compensate when you just aint got the money to go buy a vice but yet we have left over stuff from when we took what we could off a vehicle before scrapping it and then also having some small misc pieces of flat stock laying around in order to fabricate with.
For smaller work you could use a vice. Generally the problem with a vice is the height it is mounted at. You end up working at a level that is not as comfortable as it could be. A holding fixture like this is portable and could be used on a table or the floor to be able to use both hands with the tool being used at or below your waist. Also could be made larger than a 4-6" vice for a lot less. Cutting, grinding and welding require less clamping force than other types of work. You have to remember that that type of jack is used to raise cars so it does provide more clamping force than you think. Great tool from cheap parts.
Simple and effective.
Next project...make a press with a jack and then perhaps a log splitter using a jack.
valveman12 the log splitter idea is good. I thought of making the press as there not cheap to buy.
With the log splitter if u welded a good size nut onto the winding end u cud use a drill to operate it😃
Good Vice, but the handle, suggest you use a socket and ratchet to open and close. Make it wider.
IF the apocalypse started and I need a vice I will remember that Thanks 😀
In the apocalypse it survives with originality and not copying
ruclips.net/video/eSg1mw0yO4M/видео.html
Get started bruh
A vise capable of 1 1/2 tons of jaw pressure
Jack of all trades
His talent is admirable ... this is the gift of God in your life. Congratulations. Brazil. (É de admirar seu talento...isto é dom de Deus na sua vida. Parabéns. Brasil).
No talente, was a copy, stolen idea.
ruclips.net/video/eSg1mw0yO4M/видео.html
Excellent tool 👏👏👏👏👏
That's very very good President
Süper süper proje. Eline sağlık olsun
You can make a jack press machine with that
これはいいアイデアですね。
Falese maveda
Я такие тиски из домкрата выбросил, слишком слабые. Сломались через неделю,. Новые сделал из швелера 140го. Тяжёлые но работают на 200%!
perfect for press drilling 😁
Exelente aporte,Gracias
A Ideia não foi dele.
ruclips.net/video/eSg1mw0yO4M/видео.html
Good job
Good copy
This channel stolen idea.
ruclips.net/video/eSg1mw0yO4M/видео.html
Реально круто , молодец мало кто могут додуматься
TV
Wow COOL
Достойная конструкция😉😉👏👏
Muito criativo levou meu like
Foi uma copia, não teve criatividade, roubou a ideia desse canal.
ruclips.net/video/eSg1mw0yO4M/видео.html
Nice idea
Nice copy.
Before this ruclips.net/video/eSg1mw0yO4M/видео.html
Cool work 👍
Was a copy work
ruclips.net/video/eSg1mw0yO4M/видео.html
Не скажу что круто, но получилось практично и удобно.
Лайк уже поставил👍
Да ладно, дешево и сердито, без заморочек
@@АлексейАлексеевич-ь8ь краилово приводит к попадалову. Да и вообще на фига портить инструмент.
Доктору Дью понравилось бы
@@SATORI_RUclips это точно!
ruclips.net/video/eSg1mw0yO4M/видео.html
Good👍👍👍
At least someone found a good use for a peace of shit Jack. Good job
They work pretty good for leveling my old travel trailer
Yeah,...they made a POS vice
its still a piece of shit, talk about putting lipstick on a pig
Very useful congratulations
Very cool idea
But you messed up on the handle
It won't work with longer material
The handle need to be able to slide so its not on the way.
What u think¿
Thanks
В принципе идея не плохая, молодчик.
Bueno bonito y barato..buena idea
Buena copia.
Veja este ruclips.net/video/eSg1mw0yO4M/видео.html
عمل ممتاز 👍🏼
Cool ideas bro 👍👍👍
nice work
Q buen inventó. Capo
You just made a vice in a vice, do you call it a vice versa.
you call it good ADDvice ........:o)
Isn't that called inbreeding?
Inbreeding is a vice.
@@andhewonders115 That's the first comment that's actually made me laugh out loud!
Not bad.
Make it so it fits a 2 inch receiver and you have a portable cheap vise on the trail
I find it interesting that the inch isn't as dead as it is touted to be. Square with MM on top and inches on the bottom with the conversion factor on the body. Long live the inch.
In Australia, I've happily converted to the metric system----Some things became a bit weird though, for instance: "I'll beat you within 25.4 millimeters of your life!" "Give 25.4 millimeters and they'l take 1.6094 kilometers"
@@jackfrost2146 Another plus for the Imperial system it is easier to express ideas in inches and miles.
Excelente reaproveitamento de um macaco sanfona. Como é chamado aqui no Brasil
Isso foi ideia de um brasileiro que ele copiou e publicou como se fosse própria!
ruclips.net/video/eSg1mw0yO4M/видео.html
Grande ideia.
Отличная идея
Just subscribed 👍
Доктор Дью заценит))
Good
nice cross-hatch
The only problem is that it moves around a bit. Maybe if you secured it to the work bench somehow it would be great. Oh, or hold it with a vice.
excelente!!!
Excelente copia.
Ele roubou a ideia ruclips.net/video/eSg1mw0yO4M/видео.html
👍👍👍
The first thing I do when I get a new (or used) car is replace the scissor jack with an hydraulic. Considered them useless and dangerous until I watched this. Nice job.