The reason why this happens is because that black substance in the battery is manganese dioxide. Manganese dioxide is an alkaline hence why they are called alkaline batteries. Alkaline substances reacts with superglue which results in a rapid and harder curing process. Manganese dioxide has a Ph level of 7 or above so it is a great substance to use with superglue. But! Baking soda is also an alkaline substance with a Ph level of 9. So yes, baking soda is much better than an alkaline battery when doing this. It is also safer and looks cleaner. Overall, there's no reason to use a battery to do this. Just get a baking soda instead. You'll get much better results without having to worry about toxicity and is translucent in color so would look better on most applications 🙂
Powdered graphite is way better. It's normally used as a dry lubricant for locks. It's black already. I have used baking soda, cotton balls and unused cigarette filters. The cig filters will give an exothermic reaction. Yes, they'll smoke all on their own. If it's pvc, try pvc slurry for a fix.
@@WTRICK582 Understood - I'm thinking more along the lines of standard engine operating temps (not combustion temps, mind you, but engine casings etc) which varies between 100C and 150C. Anything over that and you start moving into the territory of specialist (and expensive) adhesive compounds.
WTRICK: This seems an obvious solution for repairing rigid breaks, but does it hold up in situations of vibration and flexure, the likely cause of many breaks, in contrast to the instance of unlikely impact in the vibrated bike fender? I am asking will the repaired beam that is here demonstrated continue to serve well in loaded service?
The youtuber has no intention to give an elaborate answer to the query. I have found the details:- " Cyanoacrylate "super glue" accelerators come for help. A cyanoacrylate accelerator can be applied to bonding surfaces before the adhesive to create an almost instant bond. These products are also useful to cure super glue that may be pressed out of two substrates when they are put together.
@@madhusudangupta3661 Thank you for your answer. I try to answer almost all comments. What you said about the spray is correct and accurate. But you said very scientifically and microchemically. In simple words, this is an activator spray that reduces the drying time of the glue. This spray is very cool
Ciao amico Grazie per il tuo utile commento. Nei prossimi video menzionerò sicuramente dove viene utilizzato un determinato materiale. Ma in questo video è stato utilizzato spray refrigerante adesivo o attivatore Ho usato il traduttore di Google per la traduzione italiana. Scusate se c'è un errore di battitura o di traduzione. La lingua italiana è bellissima
Hola querido amigo . Si te refieres a este video, en realidad uso baterías y superpegamento. Pero en general, usar súper pegamento junto con carbón o bicarbonato de sodio le dará mucha fuerza al pegamento.
Baking soda is right, but it’s hydroscopic, and if it is damp, as in the humid tropics it does not mix well with superglue. I had to fall back on two tons. Using the carbon of a battery seems a good idea, but you need a spray? What’s the spray? Is it necessary?
Hi dear friend You said very correctly and professionally. It is not recommended to use baking soda in areas where there is anthrax. This is a cooling spray that causes the glue to dry faster and also take on a stronger state than usual. Another job of this spray is to neutralize the heat caused by the rapid drying of a large amount of super glue
Hello my friend Yes . Steel is a type of metal that can be hammered. It means that it can be deformed due to impact. The meaning of thumbnail is that it becomes so hard that it is even more resistant to impact than steel... And also the title should be attractive.
Hello my friend This is not Hello my friend This is not WD40 . In fact, this spray dryer or activator of liquid glues in the wood and MDF industries causes the super glue to dry faster.
Dude! You have a dozen comments asking what is in the activator spray...what is in it...what is it called/ And you keep saying activator spray. So go where and ask specifically for "activator spray"? Brand name? geeez
Hello my friend Because everyone has asked what it is? If you want to get it, you can go to glue stores or tool stores. Ask for an activator or dryer for super glues or you can search on Google for special MDF super glue with spray Many brands are producing it Thank you for your good comment
Hello my friend There are so many causes of cancer, from stress and fast food to environmental pollutants, that there is no problem in using battery carbon once. But your words can also be correct. Best wishes to all cancer patients
what is that spray that he is putting on at the end?
I have done many repairs using baking soda instead of carbon. It works very well and dries almost clear.
yeah i use that too, you can mix the baking soda with carbon for stronger bond too
Thinking it's probably got led and graphite in it
Well, It's not carbon, It is Manganese dioxide (MnO2)...
Can this method work to seal a hole in the floor trap
@@janhamberg1420,are you specifying he composition of alkyline batteries? Do these work as well,or better than, carbon heavy duty batteries?
Good idea, I usually throw away weak used carbon cell batteries. I'll save some and try this.
😇😇😇
Ihope that you’ll come back here and report your results after trying the carbon batteries.
The reason why this happens is because that black substance in the battery is manganese dioxide.
Manganese dioxide is an alkaline hence why they are called alkaline batteries.
Alkaline substances reacts with superglue which results in a rapid and harder curing process.
Manganese dioxide has a Ph level of 7 or above so it is a great substance to use with superglue.
But! Baking soda is also an alkaline substance with a Ph level of 9. So yes, baking soda is much better than an alkaline battery when doing this. It is also safer and looks cleaner.
Overall, there's no reason to use a battery to do this. Just get a baking soda instead. You'll get much better results without having to worry about toxicity and is translucent in color so would look better on most applications 🙂
Powdered graphite is way better. It's normally used as a dry lubricant for locks. It's black already. I have used baking soda, cotton balls and unused cigarette filters. The cig filters will give an exothermic reaction. Yes, they'll smoke all on their own.
If it's pvc, try pvc slurry for a fix.
Hello my friend
Thank you for your excellent explanation.
I am very happy that you left a comment
Nice idea ! Thanks for share ❤🎉
Thanks for your comment ☺️
Would love to see how this holds up on higher temp applications (> 100 C). Guess I'll have to test it! Thanks.
Hello my friend
very interesting But keep in mind that all adhesives will definitely burn in front of the flame
@@WTRICK582 Understood - I'm thinking more along the lines of standard engine operating temps (not combustion temps, mind you, but engine casings etc) which varies between 100C and 150C. Anything over that and you start moving into the territory of specialist (and expensive) adhesive compounds.
Very good..very inovatif..👍
Thanks bro
@@WTRICK582 you are welcome..Bro.
آفرین به این همه ابتکار و ساخت ویدئو حرفه ای کهخاطب رو جذب میکند.........موفق باشید
Salaam.sepas as shoma
سلام.دستت درست رفیق..واقعاجالب بود..موفق باشی🎉🎉🎉
Salaam . Damet garm .
hello, can i use your technique to to fix cracked car dashboard , waiting for your
Thankyou very much. Take care.
Hi my dear. Yes. you can but it is better that you use for dashboard Soldering machine. you can see in my others video
@@WTRICK582 Thanks. But Soldering leave the ugly scars. Can i use charcoal powder with super glue?
Good job 🙏🙏
Thanks
The U.S. Army uses super glue and baking soda to repair small nicks in rotor blades on helicopters.
WTRICK: This seems an obvious solution for repairing rigid breaks, but does it hold up in situations of vibration and flexure, the likely cause of many breaks, in contrast to the instance of unlikely impact in the vibrated bike fender? I am asking will the repaired beam that is here demonstrated continue to serve well in loaded service?
Hello, what kind of spray can is that you use🖐🖐
Hello. it is an activator spray
Why you hice the spray brand? Give the people More details
What is the name of the spray applied after joining the parts and how does that work?
Hello my friend
Actually, it is a cooling spray or glue activator that shortens the drying time of the glue
It looks like a can of compressed air
@@martinrochejocquelein1772
Compressed air is NOT commercially used as a propellant
on aerosol cans
Do your homework on Propellants and Solvents
You can use any ash, it is same.
Carbon is the key...
good job ! Exactly
I plan to use pencil carbon in the next videos.
@@WTRICK582"UNTHOUGHTFUL COPY CAT."
Which one is stronger, iron dust or battery electrolyte?
Hi my friend.
This is according to your surface material . For iron I think iron dust is mor stranger
Of course iron
I don't speak english, but i'll try to translate with my app....what's the spray can you use to dry the glue ? Tank you
Thanks for your comment. This is MDF glue spray that is activator for it
Is the spray just to quicken the drying time or would you get the same result if you came back an hour or 2 later?
It is just to quicken the drying time
What is the spray?
@@fritzrichardson9168 hi my friend. This is MDF glue spray
😊😊 nice ideas
Thank you 😊
What is the best to repair PP?
Hello . What's up PP?
@@WTRICK582 Polypropylen
What's the name of that sprays which you applied on carbon and super glue? Pls.tell me.
Hello my friend. It is MDF glue spray. It is an activator spray
what is the spray he uses at the end?
Hi my friends. this is activator spray
What is that sprayer? what does it contain?
Hi . This is an activator spray. It is very cold
You don't need to break open a battery for carbon. You can purchase artist's carbon drawing pencils.
Hi my friend . you are right . i will make a video with carbon drawing pencils
@@WTRICK582drawing pencils's carbon is soft and less compact than that of of a zinc-carbon cell.
Drawing pencils's carbon is soft and less compact than that of of a zinc-carbon cell.
@@madhusudangupta3661 sure
@@madhusudangupta3661 yes
What's the spray? thnk you👍
Hi my dear . it is an activator spray
Bleach /water solution can be used as activator spray.
@@rodenreyes6320 Hi dear friend
Really ? Have you tried it yet?
@@WTRICK582 I saw it on RUclips and tried it and it works, but the formulated and commercial ones may be optimally more effective.
Hello, this is zinc carbon or alkaline battery? Thanks.
Hello . I think it is zinc battery
@@WTRICK582ósea no alcalinas
What spray you were using? You should show in this video
hi my friend . it is an activator spray . it is very cold spray
Which spray is this? And is solvent superglue?
The youtuber has no intention to give an elaborate answer to the query. I have found the details:-
" Cyanoacrylate "super glue" accelerators come for help. A cyanoacrylate accelerator can be applied to bonding surfaces before the adhesive to create an almost instant bond. These products are also useful to cure super glue that may be pressed out of two substrates when they are put together.
@@sherjitrana3315 This spray is an adhesive activator. yes it is
@@madhusudangupta3661 Thank you for your answer.
I try to answer almost all comments.
What you said about the spray is correct and accurate. But you said very scientifically and microchemically. In simple words, this is an activator spray that reduces the drying time of the glue. This spray is very cool
What is the spray used
Hi. I used the activator spray for super glue
It’s a freezer spray
@@johnelliott9415 yes . You said correct
It is CLEAR ACRYLIC LACQUER topcoat
Would toner powder from a laser printer work?
Hi . If it can mix with super glue. Yes
Secondo me dovresti descrivere con i sottotitoli il nome delle sostanze che usi .
Ciao amico
Grazie per il tuo utile commento. Nei prossimi video menzionerò sicuramente dove viene utilizzato un determinato materiale. Ma in questo video è stato utilizzato spray refrigerante adesivo o attivatore
Ho usato il traduttore di Google per la traduzione italiana. Scusate se c'è un errore di battitura o di traduzione.
La lingua italiana è bellissima
Nice!
What is the spray??
Thanks . It is an activator spray
What is the activator?
@@davidmedina6874 Hi my dear David.
This spray is cold and make glue hard during short time than usual.
Cold spray? So any spray really?
@@edurst001ify Hi my friend. Only cold spray
Nice
Thanks
Bonjour c'est très bien, mais c'est quoi la bombe que tu utilises ?
Hi my friend . Can you send me English comment too
Malzeme hangisi bu sizin yaptığınız demir tozu kaynak yapma cubugu tozu
arkadaşım merhaba
Aslında pildeki elektrolit karbona benziyordu
Hi sir
Can this method use to ceramic crack?! Txe
Hello my friend
It is better to use resin or cement for ceramic joints. Repair pastes that are water-based are also very helpful
conductive material, be careful applying it around sensitive electronic/electrical parts
Hello my friend
Thank you for your excellent point. Thank You
What’s in the spray can?
Hello my friend
This is actually an adhesive activator spray
I have seen talcum powder being used to repair cracks in fridge door liners. Only problem with super glue, cannot stick acrylic compounds.
It helps if you ruff up the surface of the plastic your are trying to glue first. Use a file or sandpaper.
Hello my friend . Thank you for your kind opinion. For better adhesion of super glue, it is better to sand the surfaces and make them rough
What type of spray is he using and glue
Hi my friend. This is MDF glue spray
Te pido de favor,,, que digas que es lo utilizas aparte de las pilas,,,
Hola querido amigo .
Si te refieres a este video, en realidad uso baterías y superpegamento.
Pero en general, usar súper pegamento junto con carbón o bicarbonato de sodio le dará mucha fuerza al pegamento.
Mas com essa quantidade de super cola não precisa de mais nada!
Olá . Obrigado pelo seu comentário meu amigo
Para maior resistência, adicione outra substância à solução de cola, obterá melhores resultados
This repair work can also be done with powdered barbecue charcoal or cigarette ash and you will be healthier...
Hello my dear friend
Yes, exactly .
Carbon powder from coal is also excellent. Also cigarette ash
Who knows, what is he spraying 4:38' on the black glued surface in the end? Thank you.
Hello my friend
In fact, this spray dryer or activator of liquid glues in the wood and MDF industries causes the super glue to dry faster.
Thanks for the answer. Have a good day. @@WTRICK582
Guys, make sure to put on hand gloves before you try.
Wow . Very good notice
And a lot of fresh air. You don't want to breathe the super glue fumes.
what was that spray?
Hi my friend. It is MDF super glue spray
What is the name/type of the spray?
Hi my friend. It is MDF glue spray.
Clearly, that's not an alkaline battery, but one of the older type, but what is that spray?
Hi . That is an activator spray
Which are the materials that u have used, let me know please
You have to mention the name of the materials to be used for the said purpose
Hello my friend
From super single component glue
Activator spray
and battery carbon
Hello my friend
From super single component glue
Activator spray
and battery carbon
What is the spray can ?
Why can’t you explain when as you go along ?
Hi my friend.
. This is activator spray for super glue or it is a spray of MDF glue .
What's in the spray can?
Hi my friend. It is MDF glue spray. Actually it is an activator spray
Baterias de "zinc" supongo no es con cualquier batería ósea NO alcalinas
Yeah what is the spray?
Hi . It is an activator spray
@@WTRICK582 To activate what? the glue?
@@user-nk4gm7bi2v
Watz activator spray?
Activater for CA glue
que esplei e esse
Olá, meu amigo
Eu não te entendi
Best result you will get by using grey cement.
Hi my friend. Yes . Cement is good .
I can't believe it
Hello my friend
Why don't you believe? Test and see the result
1. Where can you buy zinc-carbon batteries? 2. You must use a lot of super-glue.
Hi . Thanks for your comment.
what's in the spray
Hi . It is an activator. Actually MDF glue spray
Just use baking soda its white!
Baking soda is right, but it’s hydroscopic, and if it is damp, as in the humid tropics it does not mix well with superglue. I had to fall back on two tons. Using the carbon of a battery seems a good idea, but you need a spray? What’s the spray? Is it necessary?
Hi dear friend
You said very correctly and professionally. It is not recommended to use baking soda in areas where there is anthrax.
This is a cooling spray that causes the glue to dry faster and also take on a stronger state than usual. Another job of this spray is to neutralize the heat caused by the rapid drying of a large amount of super glue
Good idea!
Sir Kaya kya dal ja Raha hai.Jab Tak nahi bataoge kaise chalega
नमस्ते मेरे दोस्त
प्रवाह यह है कि हमने गोंद में कार्बन पाउडर मिलाया है। इससे गोंद अधिक मजबूत हो जाता है
Do you know what steel is?
Hello my friend
Yes . Steel is a type of metal that can be hammered. It means that it can be deformed due to impact.
The meaning of thumbnail is that it becomes so hard that it is even more resistant to impact than steel...
And also the title should be attractive.
Xịt chất gì vậy
No one is telling us, maybe all BS. Jeff
Doen't WD40 makes the super glue weak again ??
Hello my friend
This is not Hello my friend
This is not WD40 .
In fact, this spray dryer or activator of liquid glues in the wood and MDF industries causes the super glue to dry faster.
This is the most redundant and un necessarily dangerous hack ive seen
Hi my friend. It is not dangerous. It works very good and make it very hard
Throw it away.
Hello my friend . why?
You could just use glue.
@@emdeepi yes . But it is very strong if you use a additional things as baking soda or Carbon
Dude! You have a dozen comments asking what is in the activator spray...what is in it...what is it called/ And you keep saying activator spray. So go where and ask specifically for "activator spray"? Brand name? geeez
Hello my friend
Because everyone has asked what it is?
If you want to get it, you can go to glue stores or tool stores. Ask for an activator or dryer for super glues or you can search on Google for special MDF super glue with spray
Many brands are producing it
Thank you for your good comment
ok...thank you..that certainly clears that up@@WTRICK582
Better use baking soda, and don't mess with bateries chemicals.
Hello my friend
You are right . Using baking soda is much more convenient and safer
Thank you for your comment
😂@@WTRICK582
Why would that be stronger than steel? It's not.
Hi HannesMrg. Yes you are right . But the meaning of this title is actually the high strength of this composition
Hyperbolic and misleading titles of the posts on youtube attract more mosquitoes.
@@madhusudangupta3661 Yes, dear friend, you are right. But this combination is really hard and strong
Сода лучше
Привет . Спасибо за ваше мнение
Да, вы можете использовать пищевую соду для сухих участков.
And the spray can is ??????????????????????
Hi my friend. It is MDF glue spray .
My god that music🙄
Wow
Gave you a thumbs down for the music. Stopped the video and told them not to recommend your channel.
Hello my friend .
Do you know the good source of music without copy right ?
Nothing is stronger than the glue no matter the filler..................Duh
Hi my friend . If you add a carbon or baking soda you will get better results
But not stronger, You said stronger than steel.@@WTRICK582
And death before 40 from cancer?
😬😬😬
Knock knock…who is? CANCER ☢️☣️
Hello my friend
There are so many causes of cancer, from stress and fast food to environmental pollutants, that there is no problem in using battery carbon once.
But your words can also be correct.
Best wishes to all cancer patients
Has anyone tried this technique, I seriously doubt, it would work and make a very strong joint.
Hi my dear
Thanks for your comment
Yes it is very strong joint.
Salt works well..
Hi . Salt and baking soda