Hey brother how did you get the ram mount to hold on the bike !? I was watching this video so to the fact I’m looking for parts for my 959 and I noticed your ram mount on it!!! Please let me know !!! God bless!!!
This looks awesome. Would you be able to tell me what products you use to clean the bike? I see it's a matte finish paint like mine and I am not sure what products to use to keep it scratch-free and looking beautiful
Hi Cy, mostly he uses Cycle mist from 360, I believe you can find it at 360products.co , use only good quality and clean microfiber cloth to avoid scratches, if the bike is really dirty do a regular wash with mild soap, the key again is to use clean, debris free sponges and rags. I hope this helps.
Please, please do not put bolts in dry - use a small amount of copper slip on the threads ..... and if they are a critical bolt use thread-lock ... apart from that very easy to watch videos ....
Are the Ducati performance reservoirs universal? I’m planning to buy exact one on my Panigale 1199 but it’s says ‘for Ducati monster’. Would it still fit ? If it doesn’t fit could I get the adapter for the 1199?
so more questions for you Albe, so where did you get the 3point weird thing from? does it have a ducati part #? or any other part number# ? or did you make one? wish you'd show a close up of the tool. thanks for your help
So more question for you I'm putting on a set of Rizoma grips 2018 superSport S left side piece cake, right side is next you said a three point weird thing can you be a bit more specific about the three point weird thing... do I need a special tool? thanks very much for your help.
![ARGENTINA vs. CHILE [3-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 7](http://i.ytimg.com/vi/De3AWmXzhuA/mqdefault.jpg)
What size star head to remove bar ends?
I can’t quite remember, it’s been a while, but I’ll pin the comment to the top, maybe somebody can help
I wish you were my neightbor!!! Awesome vids on the 959 corse
they should just come like this from the factory and save us the time and effort
In my case, that might take some of the fun away....
This bike is beautiful
Great job bello 👍🏻👋
Hey brother how did you get the ram mount to hold on the bike !? I was watching this video so to the fact I’m looking for parts for my 959 and I noticed your ram mount on it!!! Please let me know !!! God bless!!!
Ram has a steering bolt hole adapter, looks solid but its really not
Great vid! Any thoughts why you went for the rizoma lux grips compared to domino grips? Right now im still debating which grips to go. Tnx!
The owner of the bike liked the lux better, and they were not easy to find for the ride by wire bikes
Could I use the old bracket for the front brake reservoir?
This looks awesome. Would you be able to tell me what products you use to clean the bike? I see it's a matte finish paint like mine and I am not sure what products to use to keep it scratch-free and looking beautiful
Hi Cy, mostly he uses Cycle mist from 360, I believe you can find it at 360products.co , use only good quality and clean microfiber cloth to avoid scratches, if the bike is really dirty do a regular wash with mild soap, the key again is to use clean, debris free sponges and rags. I hope this helps.
@@AlbesADV Thank you very much for the Intel. I truly appreciate it. I will look into this brand
Please, please do not put bolts in dry - use a small amount of copper slip on the threads ..... and if they are a critical bolt use thread-lock ... apart from that very easy to watch videos ....
Thank you Chris, I'll keep that in mind 😀👍
Are the Ducati performance reservoirs universal? I’m planning to buy exact one on my Panigale 1199 but it’s says ‘for Ducati monster’. Would it still fit ? If it doesn’t fit could I get the adapter for the 1199?
I'm not quite sure but shouldn't be too difficult to make it fit
so more questions for you Albe, so where did you get the 3point weird thing from? does it have a ducati part #? or any other part number# ? or did you make one? wish you'd show a close up of the tool. thanks for your help
Bryson, it a screw driver bit that I got at harbor freight, I'll publish a photo right now.
Ok thanks much Albe
Would send me what I need to order for the complete set up for the Rizoma grip and the guards, thank you
Literally just the grips and the guards, they install on the OEM components
Did the left handle bar move when u loosened the bar end?
Yes it did, the left bar end was super tight. I had to re-torque the clip-on
Albe's Adv I had the issue with mine as well
So more question for you I'm putting on a set of Rizoma grips 2018 superSport S left side piece cake, right side is next you said a three point weird thing can you be a bit more specific about the three point weird thing... do I need a special tool? thanks very much for your help.
Lol, when I say a 3 point weird thing I mean it's like a Phillips head screwdriver but with only 3 little blades on the tip rather than 4.
Albe's Adv Ahhhh ok thanks Lol