There is a latch on the left hand side, opens rear door. Also, larger displacement allows for engine to run fewer RPM's New Holland IS heaver, better for pushing material. Im all for objective comparisons, but this one wasn't.
I have 2017 bobcat t740 cab 645 hrs and 2015 and 2018 c232 new holland. Bobcat is always breaking and new holland runs every day no issues. 2015 c232 has 3486 hr. New Holland make a better product
The best machine is the one you are selling. If you worked for NH you would pick apart the Bobcat. They both have good points as well as bad. I just looked at both and thought Bobcat was a little over priced. Just be honest when you do this comparison.
Lifting also has a different rating due to the Bobcat being a radial lift, and the NH being a vertical lift. For our applications, lift height is a bigger factor than capacity, with double-stacking 4'x5' round bales on flatbeds and semi's. I wish Bobcat had a higher lift height. I'd love the ease of maintenance. I also have a NH dealer 10 minutes away. The nearest Bobcat dealer is over an hour away and would require a trip through Atlanta. That alone is a reason I avoid Bobcat like the plague.
Bobcat has both radial and vertical lift options. T650 is a vertical lift just like the C232. The T650 & C232 have exactly the same lift height of 124" lift to the bottom of a level bucket or hinge pin. The Bobcat just has nearly 1,000 pound tipping load advantage for better stability when lifting those double stacked bales. T630 has a radial lift along with T550. But T590, T595, T650, T740, T750, T770, T870 all have vertical lift.
@@MerzFarmEquip LOL still, nothing negates the trip through Atlanta that I'd never make otherwise. When we start forestry mulching that may change (really like the T770 for that), but for now that trip alone prevents a Bobcat from ever being on our farm.
On my boss farm he swap NH for Bobcat telehandler so far so good, I like servicing your n how it operates👍you can’t beat pricing n high flow hydraulics.
Do that same comparison with an LS 185 New Holland with a comparable Bobcat. Not even close. New Holland is lighter and lifts more and the hydralics are far more resonsive.
new holland has a lever to where the whole back door swing open. flip the top that you opened and then grab the lever and the whole back door opens lol
Comparing apples to oranges here. A high optioned bobcat vs a low option NH. Every single thing complained about the NH could have been ordered. Counterweights, suspension tracks, and a faster 2 speed can be enabled in the tuning. The NH engines can be tuned better than the bobcats. No replacement for displacement. The rear door does open on the NH. The auxiliary manifold tubes running up the side of the loader arms are extremely strong, and can be changed in 15 minutes in the field if need be. If a bobcat has a tube leaking, you wont know it until the hydro tank is dry, the belly is flooded, and then youre paying a huge amount of money to tow it out of the field to be serviced.
Did you mention how much it costs to replace the springs on the bobcat especially the original M series and they do break and can go through the tracks ,and didn't you buy the machine to make the ground level ,don't get me wrong I have two Bobcat ctls they are good machines and both have the suspension against my will in Australia, but suspension on skid steers is a gimmick to make you pay more at the beginning and through the life of the machine Any body looking to buy either machine forget the suspension.
I'm completely unbiased and I'm looking at buying the best brand for me. I'm a little confused on why you didn't know how to open the back door? Easy to show what dealer you work for. Lol
No doubt we have Bobcat experience. But opening a door should be easy, like a lever right there, easy to reach. This shows that it is not. New Holland makes a nice machine. We made this video to show the Bobcat Advantages. That is literally our job!
We are promoting the Bobcat as we are a Bobcat dealer. It is our job to promote the advantages of the Bobcat, and in this case there are many to point out!
Only thing I noticed is he did not open the back door on the New Holland. Only the top door. If you swing open the back door on the New Holland , I would say it's just as accessible as the bobcat.
We are no doubt in favor of the Bobcat. We are a Bobcat dealer as it says in our description. Bobcat has some major advantages and that is our job to promote those advantages.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Rear door opens on the New Holland to access the engine compartment. Nice non-biased comparison.
The video shows the only latch to open the rear of the New Holland. If there is another latch we would like to learn of such door that we missed.
There is a latch on the left hand side, opens rear door. Also, larger displacement allows for engine to run fewer RPM's New Holland IS heaver, better for pushing material. Im all for objective comparisons, but this one wasn't.
Dan Glover glad you caught that too lol. I was like yeah gotta open the second door
I ended the video when he couldn't figure out how to open the rear door🤦 I use both and the NH definitely pushes better!!
I have 2017 bobcat t740 cab 645 hrs and 2015 and 2018 c232 new holland. Bobcat is always breaking and new holland runs every day no issues. 2015 c232 has 3486 hr. New Holland make a better product
The best machine is the one you are selling. If you worked for NH you would pick apart the Bobcat. They both have good points as well as bad. I just looked at both and thought Bobcat was a little over priced. Just be honest when you do this comparison.
Lifting also has a different rating due to the Bobcat being a radial lift, and the NH being a vertical lift. For our applications, lift height is a bigger factor than capacity, with double-stacking 4'x5' round bales on flatbeds and semi's. I wish Bobcat had a higher lift height. I'd love the ease of maintenance. I also have a NH dealer 10 minutes away. The nearest Bobcat dealer is over an hour away and would require a trip through Atlanta. That alone is a reason I avoid Bobcat like the plague.
Bobcat has both radial and vertical lift options. T650 is a vertical lift just like the C232. The T650 & C232 have exactly the same lift height of 124" lift to the bottom of a level bucket or hinge pin.
The Bobcat just has nearly 1,000 pound tipping load advantage for better stability when lifting those double stacked bales.
T630 has a radial lift along with T550. But T590, T595, T650, T740, T750, T770, T870 all have vertical lift.
@@MerzFarmEquip LOL still, nothing negates the trip through Atlanta that I'd never make otherwise. When we start forestry mulching that may change (really like the T770 for that), but for now that trip alone prevents a Bobcat from ever being on our farm.
Merz Farm Equipment the bobcat has 124”, this class NH has 130”, NH also has super boom.
On my boss farm he swap NH for Bobcat telehandler so far so good, I like servicing your n how it operates👍you can’t beat pricing n high flow hydraulics.
Just bought a new T 550 cab and Joystick controls 2 speed RC ready
Congrats! Enjoy!
T550 Turned out to be a Lemon! Bobcat stepped up, replaced with the T650! Advantage Bobcat! Love the T650!
Do that same comparison with an LS 185 New Holland with a comparable Bobcat. Not even close. New Holland is lighter and lifts more and the hydralics are far more resonsive.
new holland has a lever to where the whole back door swing open. flip the top that you opened and then grab the lever and the whole back door opens lol
Comparing apples to oranges here. A high optioned bobcat vs a low option NH. Every single thing complained about the NH could have been ordered. Counterweights, suspension tracks, and a faster 2 speed can be enabled in the tuning. The NH engines can be tuned better than the bobcats. No replacement for displacement. The rear door does open on the NH. The auxiliary manifold tubes running up the side of the loader arms are extremely strong, and can be changed in 15 minutes in the field if need be. If a bobcat has a tube leaking, you wont know it until the hydro tank is dry, the belly is flooded, and then youre paying a huge amount of money to tow it out of the field to be serviced.
Did you mention how much it costs to replace the springs on the bobcat especially the original M series and they do break and can go through the tracks ,and didn't you buy the machine to make the ground level ,don't get me wrong I have two Bobcat ctls they are good machines and both have the suspension against my will in Australia, but suspension on skid steers is a gimmick to make you pay more at the beginning and through the life of the machine
Any body looking to buy either machine forget the suspension.
I got info saying the C232 has an 82 hp motor .
mic tito no that’s not true, but 74 hp is enough for this class machine.
Someone is a Bobcat fan boy. LOL
Makes me happy i went with a bobcat this year. Was looking at the same new holland this year and went with the bobcat
That makes us happy too! Thank You for watching!
I'm completely unbiased and I'm looking at buying the best brand for me.
I'm a little confused on why you didn't know how to open the back door?
Easy to show what dealer you work for. Lol
No doubt we have Bobcat experience. But opening a door should be easy, like a lever right there, easy to reach. This shows that it is not. New Holland makes a nice machine. We made this video to show the Bobcat Advantages. That is literally our job!
New holland are strong machines, but why do the track sprockets wear faster than any other track machine out there
Bobcat lifts 1000 pounds more?
Make a video proving that. I don’t believe bobcat has more lifting power
We have the Bobcat T650! Love it! A dependable workhorse! See it working on RUclips “Outdoors with Larry and Robin”🚜👍🏼🇺🇸
Got a t630 and it kicks ass 💪💪💪
Price...New Holland...comparable function for the price.....New Holland......Ndoy!
Oh I forgot climate control..New Holland.
Lol my new holland c232 lifts more in the real world than my bobcat t770
I think after listening to this it should be relabeled ... Bash New Holland as I'm kissing bobcat a**
We are promoting the Bobcat as we are a Bobcat dealer. It is our job to promote the advantages of the Bobcat, and in this case there are many to point out!
Not very honest is he.
Curious what your referring to Jeff?
Only thing I noticed is he did not open the back door on the New Holland. Only the top door. If you swing open the back door on the New Holland , I would say it's just as accessible as the bobcat.
JCB blows em both out the water and that.
I have a feeling that you are a Bob cat dealer, and this is why you are everything against New Holland!!
Piss Poor Review😂
What a joke of a comparison.
Bias much?!!!
Geezus what a joke
We are no doubt in favor of the Bobcat. We are a Bobcat dealer as it says in our description. Bobcat has some major advantages and that is our job to promote those advantages.
Ill take the newholland. Bobcats are overpriced and have lots of problems
Come on, Pitiful review !