bro i have a lot of questions about your ktm swing arm conversion... also planning on putting a ktm swing arm on my rs200.. 1. did you have problems with the stock exhaust and catalytic? i mean did it fits even your on ktm swing arm? 2. in the swing arm-chasis did you use the same stock axle bolt of pulsar rs 200? 3. regarding the axle bolt of the rear wheel..what axl bolt did you use? was it the stock rs 200 axle? or did you use a ktm rear axle bolt? 4. regarding the bracket of the brake caliper and brake caliper itselt...was it the stock rs 200 bracket and caliper that you use? did the stock caliper fits right on the ktm swing arm? please need your help and answer bro.. thanks in advance
1. Yes the exhaust was little difficult to install back , but it did fit 2.yes stock swingarm axle 3. KTM rear wheel axle 4. caliper same , bracket KTMs
@@SavageBikeWarrior07 i also wanna ask what modification you did with the swing arm bushing before you grind the swing arm of ktm on the pivot link area to the rs 200 chasis? did you removed and replaced the original swing arm bushing?
should i remove the ktm bushings on the ktm swing arm the grind the swing arm take of 2mm on both sides? and the replaced and put fresh bushings from rs 200 and press them on the ktm? do they have the same diameter?
Sir my rear suspension is making sounds like its releasing air ,when pressed and the suspension has gotten little smooth also . It is not as hard as it use to be . What can be the problem sir and what would be the solution. I have rs200 bs4 btw theres no oil leakage from the suspension . And the bike has recently completed 6000km .so its quite new . I hope you can help me out .
Bro mujhe yamaha SZ-R (2012) swing arm chahiye. Kolkata mein kahin bhi nehi mil raha hai. Mujhe koi genuine se supplier dila sakte ho. Ya to contact details.
@@SavageBikeWarrior07 thanks bro....can u tell me the length of duke rear mono shock and rs 200s shock length difference..i have fitted the swing arm in ns and it looks squatted from rear with the stock rear shock
Brother you did good but the way of explaining is Missing bro.. It's most important right watching a video so that we can do it by our self with your guidance....
Bajaj should have done this at the start 😑
But u did it💪... Looks awesome & best upgrade 😎❤️
Thanks man 🔥💯
Hello brother mujhe apni rs200 me initial Power chaiye konsi sprocket lagau please batao
Go for duke 390 sprocket kit , but you'll need to change the sprocket hub/coupler too for the sprocket to fit
bro i have a lot of questions about your ktm swing arm conversion... also planning on putting a ktm swing arm on my rs200..
1. did you have problems with the stock exhaust and catalytic? i mean did it fits even your on ktm swing arm?
2. in the swing arm-chasis did you use the same stock axle bolt of pulsar rs 200?
3. regarding the axle bolt of the rear wheel..what axl bolt did you use? was it the stock rs 200 axle? or did you use a ktm rear axle bolt?
4. regarding the bracket of the brake caliper and brake caliper itselt...was it the stock rs 200 bracket and caliper that you use? did the stock caliper fits right on the ktm swing arm?
please need your help and answer bro.. thanks in advance
1. Yes the exhaust was little difficult to install back , but it did fit
2.yes stock swingarm axle
3. KTM rear wheel axle
4. caliper same , bracket KTMs
@@SavageBikeWarrior07 how bout the rear wheel spacers bro? still stock from rs 200?.. thanks in advance bro.. i have to look for a ktm caliper bracket
@@SavageBikeWarrior07 i also wanna ask what modification you did with the swing arm bushing before you grind the swing arm of ktm on the pivot link area to the rs 200 chasis? did you removed and replaced the original swing arm bushing?
@@SavageBikeWarrior07 bro did you swap the bushing on the rs200 swing arm to the new ktm swing arm?
should i remove the ktm bushings on the ktm swing arm the grind the swing arm take of 2mm on both sides? and the replaced and put fresh bushings from rs 200 and press them on the ktm? do they have the same diameter?
Sir my rear suspension is making sounds like its releasing air ,when pressed and the suspension has gotten little smooth also . It is not as hard as it use to be . What can be the problem sir and what would be the solution. I have rs200 bs4 btw theres no oil leakage from the suspension . And the bike has recently completed 6000km .so its quite new . I hope you can help me out .
Go to the service centre & claim your warranty , you've to get your suspension changed , sometimes even a brand new suspension goes bad
Looking stunning bro,keep it up.Is your ABS working ? Because you have upgraded to a new 4-Piston Caliper.
Working perfectly 👌🏾🔥
Can i fit ktm Swing arm in ns200 pls give me reply because i want to install Swing arm and wheel also so tell me about issues bro pls help me
Yeah you can install, have to do some adjustments though & alterations
Could have bought rc itself on this much money 🙂
How much do you think it cost me ?
It wasn't a very expensive mod
Bhai swingarm mei both side Kitna cutt karna padega
Exact measurements check karna padega
Bro you had to change the rear hub too, for the 390 45 teeth sprocket??
Yes , the 41T of 200 won’t support the 45T of 390
Bro, is the KTM arm longer than the 200ns arm? , I want to install it on my Supermoto 200ns, thx
It is a little longer compared to the ns or rs swingarm , try measuring them once with a measuring tape
@@SavageBikeWarrior07 ok.. thank you brother
Bhai tune USD forks kha se liya he
Bangalore mai used parts ka market hai , waha se liya
Bro canct namber he kya tumare pass
Bro mujhe yamaha SZ-R (2012) swing arm chahiye.
Kolkata mein kahin bhi nehi mil raha hai.
Mujhe koi genuine se supplier dila sakte ho. Ya to contact details.
No idea, sorry
Bhaiya ns 200 me ktm 390 ka sprocket lg sakta h?? 45 teeth
Sprocket hub change karke Duke/Rc 390 ka lagana padega ,phir jo jayega 💪
@@SavageBikeWarrior07 thanks bhaiya 😊👍👍
Bhaiya kya ktm ka swingarm lighter hai ...pulser ns or rs k swingarm se ??
Nahi , it's actually heavier than them
Kannada matadta idiralla bro kannada dalli video madi😍😍😍
kandita Maadtini
Will the Dominar 400 swingarm be an easier installment?
I'm not really sure about this one,
Maybe you can make a video out of it?
@Kumar Ankit which means increase in wheelbase right?
Bro..did u get the rear caliper bracket seperately or did u buy the comp assy?
Caliper is the original one from the RS 200 , only the brake bracket or adapter I got a used one
@@SavageBikeWarrior07 thanks bro....can u tell me the length of duke rear mono shock and rs 200s shock length difference..i have fitted the swing arm in ns and it looks squatted from rear with the stock rear shock
@@naveedaka as far as I know the difference is negligible , don't sweat it 😉
@@SavageBikeWarrior07 bro i have a slipper clutch assy for ns/rs200 duke 125/200 rc125/200...if u intrested ..we can discuss about it more on your ig?
@@naveedaka bro I am thinking of swapping duke swingarm on my rs200 what is fitment cost nd how much difficulty u faced?
Upside down fork installation ka vdo hain bhai
Bhai this bike is your or your friends pls reply
A friends bike
Awesome work bro
Thanks mate 🤝
Bro which swingarm bush is used for ktm arm in rs 200
Stock, but altered
Bro were can we buy used swingarm of ktm ?
Drop me msg on instagram - savage Bike Warrior / Nihal Ameer 07
Bhaee maine push a tha ke duke 390 mein pulser 200 ns ka engine fit ho sakta hai
Fit toh ho jayega , lekin karna kyun hai ? 🙄
Do you sell already altered swingarns?
I’m sorry , but we don’t do that
Rc390, chain sprocket directly fit hey broo
Sprocket hub change karna padega to KTMs
Bro caliber whi kaam kr gya ki ktm wala dala
Front or back?
@@SavageBikeWarrior07 back
Brother you did good but the way of explaining is Missing bro.. It's most important right watching a video so that we can do it by our self with your guidance....
Agreed , I'll make sure of doing that in my upcoming videos 💪
I want to know, is the ktm swing arm longer ?
A bit longer , yes
@@SavageBikeWarrior07 how much does it cost ? i want to install in apache 160 4v !!
@@clashface not sure about the price for the new one
@@SavageBikeWarrior07 the swing arm creates any issues?
Bro this regarding I have some doubt pls help me
Dm me on Instagram @savage_bike_warrior
Is the d390 swingarm direct fit to Karizma r and any idea what is the weight of ktm swingarm
I highly doubt it will be a direct fit , the weight is around 5-6 kgs
@@SavageBikeWarrior07 Thank you for the reply
Please upload daily vlog what about your stunt bike
Will try to be regular with my videos, sadly I don't have time 😔 due to which it's difficult
@@SavageBikeWarrior07 ok but i am waiting for your stunt bike video
Dominar Ka swingarm Bhi laga sakte the app usse cut Bhi Nahi Karna padta
Mere paas Dominar ke parts available nahi the 😅
@@SavageBikeWarrior07 ohh😅
Can I install 170mm tyre in ns ?
You can , but there is no point of doing that , you'll lose a lot of power & mileage in that process
@@SavageBikeWarrior07 no need performance bro need brought look😂
Yeah it's possible to use that size , you'll have to remove the mud guard but
Love from Kerala 🥰
Loads of Love ❤️
Hello brother please reply
Bro change those wheels to mac wheels. 😎
My ns 200 height got decrease why
Suspension must be needing adjustment
❤️❤️❤️❤️❤️
😍😍😍
Wheelbase?
I'm sorry, i forgot to measure that 🤦♂️
bro price of KTM swing arm
Not exactly sure , got a used one
@@SavageBikeWarrior07 . how much did you get
Hindi bolo yaa to English bolo
Dono ko mix Karne ki koy jarurat na hi hai
Aadat se majboor hoon dost , sehlo thoda 😉
Bro sell me the old swingarm
DM me on instagram
🙏🙏❤️❤️
I don't have instagram bro
@@SavageBikeWarrior07 give me your contact details
Cost ??
I really don’t remember what it cost me 😅 sorry , but i did get used parts
Kannada Alle maadu guru views jaasti siguttee
Seri guru ❤️
KTM swingarm price ?
I got a used swingarm , will cost you anything between 3-5k