+Julius Adriano You are most welcome . You may visit and Enroll at sabeercad.teachable.com to get Life time access to all the tutorial videos on 3D visualization using AutoCAD , 3DSMAX and Adobe Photoshop
'MAGIC' NOT WORKING! Error message: No solution for vertex. For weeks I struggled to understand what I was doing wrong. Sometimes the 'MAGIC' happened; sometimes it did not. Now I know why. Solution: After selecting the base point or displacement, make sure you DO NOT specify a second point of displacement which is too far (vertically) from your base point. Having said that, thumbs up to the owner of SabeerCAD. Excellent job👌.
You must have selected a the wrong object or the object you have selected may not be closed and continuous . Just make the pline profile once more picking the point the correct order , when you have reached the last but one vertex , just give "close" to exit the pline . Then you extrude with the taper angle
tnx this really helps specially in my 3d project house, im having a hard time making this slope roof, hope i can do this :D oh ya i just press subscribe ^_^
sir your work and your language style is good.....i like your work...g0d bless u... and sir same problem here tapering angle sloped roof. when i make face command then select move aftr slop make equal. nt show in 30 degree nd 60 degree... plz tell me something about this problm.thnanku
Just follow my tutorials step by step . You will definitely get the result . To move the solid roof you have to give solidedit command and go to face option and then take move option and the select the face to be moved .
Pls, on my AutoCAD 2018, the move is not applying to the roof but when I try offset it works but display the bottom of the roof on top of it as well. What can I do
I was following your command step by step but it can't be move for the existing roof...i'm using autocad 2010 please give some advice how make it properly the slooped roof.
As shown by you I have extruded the profile in a tapered path at 60 degrees and with a height of 500mm. however when i try to move the top surface t a distance above the roof i get a message that there is a modelling operation error and there is no solution for a vertex.I am not getting the fuul sloped roof. Kindly advise where I am making a mistake. regards
I cant do roof slope, every time i tried solidedit then face then extrude but never went full sloped. it always keep halfway but i did put high random number up to move
hello sir? how can I access your private video? in the sabeer3d. Your video tutorials are very helpful, appreciated the effort of explaining things clearly and easy to understand. I will be grateful if you can give me access to your private videos
+Daryl Malagum You are most welcome . You may visit and Enroll at sabeercad.teachable.com to get Life time access to all the tutorial videos on 3D visualization using AutoCAD , 3DSMAX and Adobe Photoshop
extrusion using a path seems valid only on 90deg angles of the polyline on the xy plane. however, i tried using it on polyline with acute angle and the extrusion ignores the path of the acute angled polyline. is this true or is there something wrong on my drawing?
hi sabeercad, Im a student and i learn autocad 3D by myself, and i base on your tutorial to learn but i get a problem like that : when i want to draw a polyline in a plan xOy, the polyline was draw in a nother plan like xoZ. So i wonder what the command to choose a plan to draw. Thanks for your reply.
tuan dung Tran You have bring the UCS (x-y plane) on the face where you want to create a polyline . Just disable dynamic ucs before aligning the ucs .(Ucs can be easily aligned using UCS/ 3POINT option)
Sir, i am student of autocad. i can't draw a tapper roof, when i am extrude the object with tapper, it is showing model operation error and gap cannot be filled. Please give me a reply
i figured out lately that my problem is a bug in autocad. i am using autocad architecture in particular. the bug lies to those who are using millimeter as a unit. solidedit command won't work if you are away greater than 1000 units in the wcs. anyway, thank you.
HELP!!! If i decide to take out one window , eventually the wall will still have an empty hole at the place of the window. Can you tell me please how to fill up the empty space? Thank you in advance Mo
got it!except for the parapet molding part...i can't create the pl arc, don't know what i'm doing wrong, that's why it won't extrude!hahhaha! (what i did was draw a different molding in wcs then made use of the 3d orbit then move it...)
Hello Sir, I have tried a 100 times but cannot get the roof well. Getting stuck at the solidedit level. Followed same process again and again but not getting it. Its a polyline. Please help. Thank you
Sir Sabeercad after i extrude with taper successfully but when i do the solidedit (face, move and click the height) the magic did not appear. i follow all of your instructions. i am using AutoCAD 2009. please help. thank you very much sir.
If you closely follow the procedure you should get the result if you still find any problem you can upgrade the version of Autocad yo 2013 or anove . All the best
hi when im doing the solidedit command, selected face, selected move, then selected a base point, then selected a final point it doesnt do the magic. it says "Modeling Operation Error: No solution for a vertex."
'MAGIC' NOT WORKING! Error message: No solution for vertex. For weeks I struggled to understand what I was doing wrong. Sometimes the 'MAGIC' happened; sometimes it did not. Now I know why. Solution: After selecting the base point or displacement, make sure you DO NOT specify a second point of displacement which is too far (vertically) from your base point. Having said that, thumbs up to the owner of SabeerCAD. Excellent job👌.
I stuck on solidedit level too. I had to do 30 angular roof and I do this:extrude>taper angle>30 (maybe there is something wrong)>50; and next solidedit>face>move... and my roof is so high. Please help
i type shade in the command pane but it doesn't place any color. it's just black. i don't know what to do about it. i'm using autocad 2010. please help me.
Plesase hepl me, I have proplem at solidedit function, example, I make a rec 5000x5000, ext, t, 60, 500 => ok, same your tutorial. Continuous with Sodidedit, f, m, choose top face, choose base point but after second point=> no thing change.
If you want to make the top face to get intersected at a point there is an easier way. No need to give solidedit command . just click on the extruded object , you will see an arrow at the center of the top face pointing upwards. Click on this arrow (grip) and move the mouse upwards. There you will see the faces intersecting. All the best...
Bro I'm Having a problem while giving a tapering angle. I can't give a 60 degree angle. whenever i give it says cannot extrude the selected object.. please help
Thanks for your feed back ... Watch out for more such tutorials in future .....
the best instructor, I learn a lot from you
Happy to hear. Thank you 😊👍
Sir your are amazing tutor, I learn a lot from you. Your explanations are very easy to understand.
+Residential Remodelling by Farooq Interiors Thanks for your interest and comment
try checking this one. this is quite interesting
ruclips.net/video/j2mC8vNBcTw/видео.html
Try to compare this technique. more interesting and easy
click this link ruclips.net/video/j2mC8vNBcTw/видео.html
Your channel is great! I'll be working as a cad designer and your videos are very helpful. Will be watching more. Thanks for this.
+Julius Adriano You are most welcome . You may visit and Enroll at sabeercad.teachable.com to get Life time access to all the tutorial videos on 3D visualization using AutoCAD , 3DSMAX and Adobe Photoshop
thank you so much sir.i almost solve my all problems with the help of your tutorial thanks again sir
You are most welcome
You look like you're an expert. I appreciate your videos they're very helpful for me.
Thanks for that comment. Make the best use of all the videos
You are welcome . Do subscribe to my channel to get mails on my future video uploads.
Thank you !
This has been a life saving tutorial
Thanks and best wishes...
More than great! Along years I had been trying to find an easy way to build it. Thanks a lot sabeercad.
man you are good. keep it up. God bless you for sharing
You are most welcome :)
you are good teacher, easy to understand
thank you very much for this video
Excellent teaching method. Thanks, I do enjoy learning.
Thank you 👍😊
Awesome teaching Sir
Superb sir...... Good..your explanation..............lot of thanks sir
+Mohd Yousuf You are welcome ...
Thank you Please don't stop your tutorials.
wooow you are the best sir .
you my much help solve my problem I had on autocad 3d
+yacoub awaleh Thanks for your comment . I don't know french
'MAGIC' NOT WORKING!
Error message: No solution for vertex.
For weeks I struggled to understand what I was doing wrong. Sometimes the 'MAGIC' happened; sometimes it did not. Now I know why.
Solution:
After selecting the base point or displacement, make sure you DO NOT specify a second point of displacement which is too far (vertically) from your base point.
Having said that, thumbs up to the owner of SabeerCAD. Excellent job👌.
I am a beginner, thanks for this video guideline
+somphone khamlibounthavy You are most welcome ☺
Your roof method is so simple. Thank you.
+The_Howler You are most welcome :) . You may visit sabeercad.teachable.com for rest of the videos .
+The_Howler You are most welcome :) . You may visit sabeercad.teachable.com for rest of the videos .
sabeercad Thank you sir. These are great lessons to refine the autocad skill.
it is extremely difficult
your videos are good. I'm now a subscriber! Thanks!
Thank you so much sir .l Don't have any idea about Sloped roof thanks for helping me.
thanks for the explanation really appreciated it :)
You are welcome
big help, thumps up for you sir.
Just follow the procedure in the video step by step pausing the video , you will definitely get the result . All the best
You must have selected a the wrong object or the object you have selected may not be closed and continuous . Just make the pline profile once more picking the point the correct order , when you have reached the last but one vertex , just give "close" to exit the pline . Then you extrude with the taper angle
great. go ahead, good explanation...
Thanks for your comment
tnx this really helps specially in my 3d project house, im having a hard time making this slope roof, hope i can do this :D
oh ya i just press subscribe ^_^
You are most welcome . You can visit and Enroll at sabeercad.teachable.com to do a course in 3D Visualization
Very helpful. Thank you.
+Huzaifa Safdar You are most welcome :)
sir your work and your language style is good.....i like your work...g0d bless u... and sir same problem here tapering angle sloped roof. when i make face command then select move aftr slop make equal. nt show in 30 degree nd 60 degree... plz tell me something about this problm.thnanku
Just follow my tutorials step by step . You will definitely get the result . To move the solid roof you have to give solidedit command and go to face option and then take move option and the select the face to be moved .
sir, it says modeling operation error : gap cannot be filled please help
thank you for your tutorial its really a big help for a biginners like me
Awesome tutorial!!
Thank you !
I am planing to upload . Please wait for it
Hello, is that possible that the video get french subtitles, please ? It's a really good video.
es un programa muy bueno tengo 53 años y en estos momentos estoy haciendo un curso
I am the student your vedio tutorila
very very thanks sir
+Mahdi Hasan W/Salam . You are most welcome
Thanks Sir
Very nice 👍
Nice, clean tutorial, outstanding job!
TY BRO U HELPED ME A LOT
great work
Thank you 👍😊
it really a big help thank you man
Thanks Mr:Sabeer.Thanks a lot.
Pls, on my AutoCAD 2018, the move is not applying to the roof but when I try offset it works but display the bottom of the roof on top of it as well. What can I do
The same procedure works for al versions. Just follow it step by step
Thank you. well done
That was great!
+garrett barron Thanks for that comment . Why don't you learn 3DS MAX software to learn proffessional quality rendering ... ☺
its on a long list of things to do
hey ser your great, thank u for everything
Very informative.
thank for this vedio bro.
+Dexter Amosin You are welcome
thank you too so much for this tutorel
You are welcome 😊
wow, thank you very much.
+Vird Sam You are welcome
the best
Thanks 🥰
Hi Sabeer. Thanx for all of youre tutorials but
how to make a cable roof? Thanx
Thanks for this tip
You are welcome 😊👍
I was following your command step by step but it can't be move for the existing roof...i'm using autocad 2010 please give some advice how make it properly the slooped roof.
+John Thirdy Cubangbang You may send the file to sabeercad@gmail.com , will check it and get bak
Very good
thank you for this!
+Elisa Shay You are welcome :)
As shown by you I have extruded the profile in a tapered path at 60 degrees and with a height of 500mm. however when i try to move the top surface t a distance above the roof i get a message that there is a modelling operation error and there is no solution for a vertex.I am not getting the fuul sloped roof. Kindly advise where I am making a mistake. regards
While you extrude dont give the extrusion height . Instead you can pick a point on top as I have shown in the tutorial.
I cant do roof slope, every time i tried solidedit then face then extrude but never went full sloped. it always keep halfway but i did put high random number up to move
Just repeat the steps all over again.
hello sir? how can I access your private video? in the sabeer3d. Your video tutorials are very helpful, appreciated the effort of explaining things clearly and easy to understand. I will be grateful if you can give me access to your private videos
+Daryl Malagum You are most welcome . You may visit and Enroll at sabeercad.teachable.com to get Life time access to all the tutorial videos on 3D visualization using AutoCAD , 3DSMAX and Adobe Photoshop
please which auto cad do you use 2022 or?
extrusion using a path seems valid only on 90deg angles of the polyline on the xy plane. however, i tried using it on polyline with acute angle and the extrusion ignores the path of the acute angled polyline. is this true or is there something wrong on my drawing?
hi sabeercad, Im a student and i learn autocad 3D by myself, and i base on your tutorial to learn but i get a problem like that : when i want to draw a polyline in a plan xOy, the polyline was draw in a nother plan like xoZ. So i wonder what the command to choose a plan to draw. Thanks for your reply.
tuan dung Tran You have bring the UCS (x-y plane) on the face where you want to create a polyline . Just disable dynamic ucs before aligning the ucs .(Ucs can be easily aligned using UCS/ 3POINT option)
Sir, i am student of autocad. i can't draw a tapper roof, when i am extrude the object with tapper, it is showing model operation error and gap cannot be filled. Please give me a reply
Just follow the tutorial step by step , you will surly get the result
Nice
Thanks 😊
thanks sir. What software you have used for screen capture?
I use Camtasia studio
thank tou sir.
Is that possible to work in 3d plan and then switch on to 2d mode? I need also 2d plans and 3d as well.
How should I such for the beginning once?
i figured out lately that my problem is a bug in autocad. i am using autocad architecture in particular. the bug lies to those who are using millimeter as a unit. solidedit command won't work if you are away greater than 1000 units in the wcs. anyway, thank you.
thank you!
Thank you so much sir!
You are welcome 😊
Thanks for the lecture sir.But the move face part didn't work when i tried it. the response was different topography detected. Can you please help me?
+Ajene Oteikwu Just erase and recreate the Roof .
Thank you, sir. Please don't stop your tutorials..
Thank you Sir for your nice tutorial, but I am unable to join the slope d roof edges. Please give me tips. I am working on 2010 version.
HELP!!!
If i decide to take out one window , eventually the wall will still have an empty hole at the place of the window.
Can you tell me please how to fill up the empty space?
Thank you in advance
Mo
this helps a lot
Can you help me develop the roof design if I have the floor plan?
Just go through my roofing tutorials and try it on your own.
Thank you sir
thank you so man
got it!except for the parapet molding part...i can't create the pl arc, don't know what i'm doing wrong, that's why it won't extrude!hahhaha! (what i did was draw a different molding in wcs then made use of the 3d orbit then move it...)
Hello Sir, I have tried a 100 times but cannot get the roof well. Getting stuck at the solidedit level. Followed same process again and again but not getting it. Its a polyline. Please help. Thank you
+Deepak Borate If you closely follow the tutorial you will get the result . You may send the file in sabeercad@gmail.com . I will check it and get bak
i had the same problem at first , but solved it by changinf my view to 2d wirframe and the selecting the face very close to the corner and it worked.
WHICH VERSION ARE U USING ?
Try to compare this technique. more interesting and easy
click this link ruclips.net/video/j2mC8vNBcTw/видео.html
sir,,i havea problem,,cant be extrude,,i follow all your steps here,,but there is no change,,thanks for info.
Check whether the polyline you have created is the closed one.
CHANGE TOPOLOGY DETECTED,,,that is the error sir
Great
+Davidson Vincent Thanks ☺
Davidson Vincent hi
Sir can you provide floor plan for practice of different drawings
Will upload in my Web site sabeercad.com very soon
Ok
Sir Sabeercad after i extrude with taper successfully but when i do the solidedit (face, move and click the height) the magic did not appear. i follow all of your instructions. i am using AutoCAD 2009. please help. thank you very much sir.
If you closely follow the procedure you should get the result if you still find any problem you can upgrade the version of Autocad yo 2013 or anove . All the best
sabeercad appreciated your reply sir.
Hello sir , always having problems when using a 60 degrees taper.
Interested i want to know More, and then the rendering aspect too
hi when im doing the solidedit command, selected face, selected move, then selected a base point, then selected a final point it doesnt do the magic. it says "Modeling Operation Error: No solution for a vertex."
+Willy Junior Beros Just repeat the same procedure , from creating a polyline to see the Magic ☺
'MAGIC' NOT WORKING!
Error message: No solution for vertex.
For weeks I struggled to understand what I was doing wrong. Sometimes the 'MAGIC' happened; sometimes it did not. Now I know why.
Solution:
After selecting the base point or displacement, make sure you DO NOT specify a second point of displacement which is too far (vertically) from your base point.
Having said that, thumbs up to the owner of SabeerCAD. Excellent job👌.
Thanks for the tutorial.Pls can you advise how do you get back to previous view.
I stuck on solidedit level too. I had to do 30 angular roof and I do this:extrude>taper angle>30 (maybe there is something wrong)>50; and next solidedit>face>move... and my roof is so high. Please help
To get 30 degree Inclination for the roof , The angle of Taper should be 60 degrees (90 - 30)
sabeercad I forgot to edit but I did it myself. Anyway thank you 😊
try checking this one. this is quite interesting
ruclips.net/video/j2mC8vNBcTw/видео.html
Try to compare this technique. more interesting and easy
click this link ruclips.net/video/j2mC8vNBcTw/видео.html
You can also create the mould using the SWEEP command
Sir when i am extruding, this surface is end up with grid lines , how to convert this surface into solid.?
i type shade in the command pane but it doesn't place any color. it's just black. i don't know what to do about it. i'm using autocad 2010. please help me.
You can try different visual styles using the SHADEMODE command...
matur nuwun
Cahyani Widiatmoko Thanks
Plesase hepl me, I have proplem at solidedit function, example, I make a rec 5000x5000, ext, t, 60, 500 => ok, same your tutorial. Continuous with Sodidedit, f, m, choose top face, choose base point but after second point=> no thing change.
If you want to make the top face to get intersected at a point there is an easier way. No need to give solidedit command . just click on the extruded object , you will see an arrow at the center of the top face pointing upwards. Click on this arrow (grip) and move the mouse upwards. There you will see the faces intersecting. All the best...
i love you bro
+Harapan Harapan Thank u ☺
Thanks men
Jajakallah
Bro I'm Having a problem while giving a tapering angle. I can't give a 60 degree angle. whenever i give it says cannot extrude the selected object.. please help
Thank you.
Hello Sir, Part 7 is missing. Pl. provide.....Thanks...
Part 7 is available. Please check the playlist in my channel RUclips.com/SabeerCAD
Hi, can i see haw you done balcony i cant see distances
give DIST command and get it