Animation pakka... Content much needed for beginners... I need to attend class on this... Only expert driver I knew in city is you . Anna keep growing 😃.
Super explanation ji... Kindly upload some videos like how to use accelerator. Bcoz exactly do know how to press accelerator... Hope your video will be more helpful to learn and apply
if possible explain in English this particular video. One video about 90 degrees explanation was superb and it was nicely understood by me and many people wanted. tku n God bless you
This function works only on Diesel cars like swift dzire. In petrol cars, Minimal acceleration should be needed in order to move the vehicle. If you leave the clutch in full stretch petrol engine will go off.
Next oru very small road la bikes traffic irukka road la reverse yedukura video podunga ji. Naan appaedi thaan oru vaati small street la pogum pothu , metro water lorry front la vanthu, long reverse pora maari aagiduchi...very tough
Cars are built to drive in traffic as well. Braking and clutch leave mixed will ruin the clutch, should be cautious of that alone. Rest it will last upto 70k kms if properly driven.
Half clutch is like clutch released post the biting point but not full and vehicle is moving forward without pressing the gas pedal. Riding the clutch is like clutch is semi pressed or a minimum amount of pressure is applied on the clutch pedal and the gas pedal is also pressed while the vehicle is moving above 20.. i have read through multiple posts in team BHP and all are telling that clutch is to be used only while changing gears and while complete stop of the vehicle. Other use cases like half clutch or clutch riding will damage the flywheel or the clutch plate.. but they fail to explain how to crawl in traffic without half clutch. Logical explanation i got is, when there is a snail movement traffic observed in that area, start early and reach early instead of getting stuck in the snail movement traffic.. need to ask the service advisor on this, but they will tell drive as you like, because once the part is damaged, it's more money for the service centre.. frustrated whom to believe and what to follow. General thumb rule to follow: start early and reach early.
You should never do that. Go with the flow of speed. Imagine, you driving a bike at 40 km/Hr, you will not reduce fastly to first. You cannot. Similarly, once the speed is reduced you need to reduce to first. Hence, have it in second for a moment and then shift to first. First gear should be engaged only if speed is reduced below 15 or 10 speed.
@@CarcontrolDrivingAcademy Thank you soo much for your response bro 🙏🙏🙏... I won't do that in future.... Actually I did that while approaching a traffic jam..... Traffic jam la vandiya stop pannitu first gear potu dana bro start pannanum.....so that I did like that in advance..... I have fully engaged my clutch but first gear vilala bro....apdi dan Ella vandilayum gear box safety kaaga speed based gear locking mechanism edum vachurpangala or is it any problem?
Reducing to first gear causes stress to gear box at higher speeds, that is the reason mainly we need to reduce the speed and engage gear. It's the engineering behind the gears. Not a problem at all. Also, thanks for the compliment 😉😉
Detailed explanation. You covered some important points that other tutorials did not. Thank you!
Scientific explanation with animation and idle speed details are very useful. Thank you so much for your enthusiastic efforts. 🤝
Clutch in car very important தெரிஞ்சுக்கிட்டேன் சார்
New during the very very important points sir
Very educative. Super. Thanks to u
Crystal clear explanation! Nice Effort!
Very gud information bro. Clearly explained..
தரமான வீடியோ வாழ்த்துக்கள்
Excellent...an illustrative presentation!
Thanks for the very useful inputs .... Keep going👍
Animation pakka... Content much needed for beginners... I need to attend class on this... Only expert driver I knew in city is you . Anna keep growing 😃.
Annaa very good information for clutch control thank you very much
Nice explanation. Understood !!!
Discussing various different topics are good.
Clutch control nicely explained
Excellent Analysis Good Information Keepitup Sir 👍👍
Very super presentation....😍😍😍😍this type of snenarios is really helpful😍😍😘😍
Very very useful and most fundamental technique explained in the simplest way. THANK YOU BROTHER
Very nice explanation Brother and I am facing problem when i release clutch, vehicle is going back in traffic. Please make video for this Brother.
Thank you bro for explaining this now I got that clarity
Brilliant way of explaining this concept. Very very helpful 👍
thanks suresh sir...
Speed breaker la drive panra video podunga bro along with leg movements 🙂
Really superb, Congrats
இப்படி விதவிதமாக நகரும் சூட்சுமத்தை யாரும் இவ்வாறு
தெளிவாக சொல்லித் தரவில்லை
என்பதை நன்றியுடன் கூறிக்கொள்வதை பெருமையாக
நினைக்கிறேன். அனைவரும் ஆள்க.
Super explanation ji... Kindly upload some videos like how to use accelerator. Bcoz exactly do know how to press accelerator... Hope your video will be more helpful to learn and apply
if possible explain in English this particular video. One video about 90 degrees explanation was superb and it was nicely understood by me and many people wanted.
tku n God bless you
Super I understand u are clutch control
Good explanation and useful vedio 👌👌👌👌
Very well explained bro thank u👍
Excellent explanation. Thank You Sir.
Clean and clear explain
Super bro my car is new Dizer vxi 2021 model. So neeinga oru new car la explain Panna use fulla irrukum eanku.
RPM Check pani parunga idle evlo nu.
Morning time la clutch experiment panunga
This applies for all cars.
Ok bro
Very nice information brother
Wowwww video sir 😍✨
Super explanation brother
Outstanding 🎉
This function works only on Diesel cars like swift dzire. In petrol cars, Minimal acceleration should be needed in order to move the vehicle. If you leave the clutch in full stretch petrol engine will go off.
Please drive all the petrol latest cars. Let me know after you drive. 😉
Next oru very small road la bikes traffic irukka road la reverse yedukura video podunga ji.
Naan appaedi thaan oru vaati small street la pogum pothu , metro water lorry front la vanthu, long reverse pora maari aagiduchi...very tough
Check this
ruclips.net/video/IkrspW0mM0I/видео.html
Gud information suresh sir
Slow ஆக செல்ல மற்றும் traffic இல் செல்ல பின்பற்ற வேண்டிய snail movement, half கிளட்ச் பற்றிய தகவல்கள் பயனாக இருந்தது🙏
Bro athu chennai menjur bypass thana ?
Bro yappadi smooth gear shifting pannaum nu video podunga bro . Because na yappo clutch vidrapaium car la oru vibration create aguthu .
Bro etha pathi nega video podunga
Bro clutch release panurapo butting point varapo lite ah accelerate pananum
@@Makprabhu romba thanks bro 😊
Check your setting position bro, sometime when you're too close to steering you may miss good leg position, and leave clutch slowly in first 2 gears
Seat adjustment 172cm kku dezire.lxi la yebbadi pannanum
Nice video. Thank u
will creep work in alto800 ? when i remove foot from clutch is getting switched off ?
Excellent sir
Super..
Bro...
Very nice sir
Nice video
Bro petrol car la light ah accelerator kudukuluma..intha mari technic lam diesel car la than work aguma..
Welcome work
Bro en kitaium licence iruku,aana unga videos pathudha driving improve panitu iruken...
சூப்பர் நண்பரே
Love from kerala
How to put Sudden brake safely please do video sir
Thanks Anna 🙂
Nice bro
காரை இயக்க ஆக்ஸிலேட்டர விட கிளட்ச்க்கு இவ்வளவு செயல் திறன் இருப்பதை தெரிந்து கொண்டேன் சார்.
Super bro 💐👌👍
Semma sir
Super anna❤️🔥🔥🔥
Sir super
Super
semma
Anna reverse slope parking Oru video podunga anna
Spr clm
Sir clutch driving full ah ve press panite irukkanum ah sir
Depends on the situation ma'am.
@@CarcontrolDrivingAcademy ok Sir Thank you
Super g
Bro can we do gear skipping? 2nd to 4th or 3rd to 1st gear
Depends on speed and situation.
Yes we can skip.
I'm learner. I've one query- Would that technique be wrong if I controlled the car with brakes by bringing the clutch to the bitting point?
Clutch will depreciate on flat road. You can do that on slope.
Will the clutch wear out soon in half clutch scenario?
A clutch will work perfectly for roughly 70 to 80 k kms, no need to worry.
Bro ippo car la rpm meter illa so. Eppidi rpm kandupudikurathu
Whether frequent use of half clutch will wear and tear clutch plate?
Bro athigama half clutch use Panna clutch plate theimanum irukuma?
Cars are built to drive in traffic as well. Braking and clutch leave mixed will ruin the clutch, should be cautious of that alone. Rest it will last upto 70k kms if properly driven.
@@CarcontrolDrivingAcademy thanks for update.
What's the difference between half clutch and riding on clutch
Half clutch is like clutch released post the biting point but not full and vehicle is moving forward without pressing the gas pedal. Riding the clutch is like clutch is semi pressed or a minimum amount of pressure is applied on the clutch pedal and the gas pedal is also pressed while the vehicle is moving above 20.. i have read through multiple posts in team BHP and all are telling that clutch is to be used only while changing gears and while complete stop of the vehicle. Other use cases like half clutch or clutch riding will damage the flywheel or the clutch plate.. but they fail to explain how to crawl in traffic without half clutch. Logical explanation i got is, when there is a snail movement traffic observed in that area, start early and reach early instead of getting stuck in the snail movement traffic.. need to ask the service advisor on this, but they will tell drive as you like, because once the part is damaged, it's more money for the service centre.. frustrated whom to believe and what to follow. General thumb rule to follow: start early and reach early.
Tnx sir
Car la best mileage taken driving method for professional driver
video please 🥺🥺🥺🥺🥺🥺🥺🥺🥺🥺🥺🥺🥺🥺🥺🥺
Bro 1st comment !!
Coolllll
Hi bro
Anna i taking half clutch because car off aiduthu
Hold in half clutch for some response, there will be a delay in response from engine.
10 th🤔🤔
8 சீட்டர் கார் யுடன் போடுவது எப்படி வீடியோ போடுங்க
Kedacha udanae podran.
Bro while moving at 40kmph I'm unable to change from third gear to first gear. Is it normal in all cars or an issue?
You should never do that.
Go with the flow of speed.
Imagine, you driving a bike at 40 km/Hr, you will not reduce fastly to first. You cannot.
Similarly, once the speed is reduced you need to reduce to first. Hence, have it in second for a moment and then shift to first. First gear should be engaged only if speed is reduced below 15 or 10 speed.
@@CarcontrolDrivingAcademy Thank you soo much for your response bro 🙏🙏🙏... I won't do that in future....
Actually I did that while approaching a traffic jam..... Traffic jam la vandiya stop pannitu first gear potu dana bro start pannanum.....so that I did like that in advance..... I have fully engaged my clutch but first gear vilala bro....apdi dan Ella vandilayum gear box safety kaaga speed based gear locking mechanism edum vachurpangala or is it any problem?
Also I want to thank you for ur driving tips.... which helped me a lot to get expertised in driving..... Keep doing bro ur a great driving trainer 🔥❤️
Reducing to first gear causes stress to gear box at higher speeds, that is the reason mainly we need to reduce the speed and engage gear. It's the engineering behind the gears. Not a problem at all.
Also, thanks for the compliment 😉😉
@@CarcontrolDrivingAcademy welcome bro ❤️🔥
Hind ne
Google d
Oru worst school la poi joint panniten money waste unga friendly ya illa
Wonderfull explanation bro