Good video but if you want to learn a bit more Saunders has a really in depth spreadsheet that will help you verify you are using the correct tool for the desired thread size. It really helped me understand more about single form thread milling. Also you will need to know the crest height of your form tool (which is the distance from the very tip of the cutter to the shaft od). Check Harvey Tools speed and feed pdf because depending on the material you are threading they will have the suggested number of stepovers to take. To figure that up for example in Aluminum is 2 stepover; pitch diameter offset / 2. Enter that value into your stepover and that takes care of that. Also make sure on the linking tab the bottom option is checked for lead to center .
Good video but if you want to learn a bit more Saunders has a really in depth spreadsheet that will help you verify you are using the correct tool for the desired thread size. It really helped me understand more about single form thread milling. Also you will need to know the crest height of your form tool (which is the distance from the very tip of the cutter to the shaft od). Check Harvey Tools speed and feed pdf because depending on the material you are threading they will have the suggested number of stepovers to take. To figure that up for example in Aluminum is 2 stepover; pitch diameter offset / 2. Enter that value into your stepover and that takes care of that. Also make sure on the linking tab the bottom option is checked for lead to center
.
These are awesome tips! I will definitely be using them in the future. Thank you for watching!
Sure made it seem simple!
how do I get the Camplete extension in my fusion?
You can find the extension in the Fusion 360 app store and its as simple as download and install. Look for it in the "Add In" feature in Fusion.