I'm really frustrated by these cameras. I had them working well and apparently, they got touched by a virus - they would randomly reboot to factory IP addresses. I took them off my network and the problem persisted. I'm now trying to reflash and get them back to a known state, but the order of flash versions and other issues are making this impossible. Looks like this serial port erase/reload is the next step.
Rs232 to USB converter and thats connected to your PC and also you will Rs232 (9 pin) female to female and this one connected from the back of the DVR/NVR and to the Rs232 converter
@@minpark6220 i donno if there is a female to usb adaptor exists, i didn't find it ,all i found was rs232 male to usb only, at least in my country, if there is a female to usb adaptor you found then yes go ahead will be better.
@@secpralcomvideo3441 where i can get the serial cable to usb like in your video? is it work the same if i used usb to serial cable by aten. cause i see there are serial ports on the back of dvr, not in the inside like you do
![Kodak Black - Versatile 4 [Official Video]](http://i.ytimg.com/vi/VcP_1Ua__vY/mqdefault.jpg)
Do you have the pin out serial connection?
I'm really frustrated by these cameras. I had them working well and apparently, they got touched by a virus - they would randomly reboot to factory IP addresses. I took them off my network and the problem persisted. I'm now trying to reflash and get them back to a known state, but the order of flash versions and other issues are making this impossible. Looks like this serial port erase/reload is the next step.
Can i use this to reset Hikvision IP camera using lan port of the camera?
very Impassive.
Thank you
Dear, this can be done with a utp cable through the rj45 port?
probably not, serial connection bypass all the security
what kind of serial connector do I need ? any link for the product please ?
Rs232 to USB converter and thats connected to your PC and also you will Rs232 (9 pin) female to female and this one connected from the back of the DVR/NVR and to the Rs232 converter
www.amazon.com/StarTech-com-Black-RS232-Serial-Modem/dp/B00QM8ZPZ4/ref=sr_1_15?crid=2X890S5HDU5JB&dchild=1&keywords=rs232+9+pin+cable&qid=1607697877&sprefix=rs232+9+pin+%2Caps%2C464&sr=8-15
www.amazon.com/Sabrent-Converter-Prolific-Chipset-CB-DB9P/dp/B00IDSM6BW/ref=pd_lpo_147_img_2/143-3468203-3167825?_encoding=UTF8&pd_rd_i=B00IDSM6BW&pd_rd_r=95d88797-02ee-449b-a54d-7c443afd06b6&pd_rd_w=cQ3Uy&pd_rd_wg=ONall&pf_rd_p=7b36d496-f366-4631-94d3-61b87b52511b&pf_rd_r=2YGK7HE7DHVVEQKRPSCK&psc=1&refRID=2YGK7HE7DHVVEQKRPSCK
@@Amir_91 Don't I better buy a female RS232 to USB adapter then ???
@@minpark6220 i donno if there is a female to usb adaptor exists, i didn't find it ,all i found was rs232 male to usb only, at least in my country, if there is a female to usb adaptor you found then yes go ahead will be better.
Do you have the pin out serial connection? pls..thank you..
I unable to find driver, May I get driver link please
What Is your DVR model, and firmware?
It was an old DVR I guess DS-7200HFI series and the firmware 3.1.3
@@secpralcomvideo3441 where i can get the serial cable to usb like in your video? is it work the same if i used usb to serial cable by aten. cause i see there are serial ports on the back of dvr, not in the inside like you do
i see u are using ttl serial. i planned to using rs-232 on the back of dvr. is it compatible with this method?
@@wikoo2807 Is you can do it this way.
Hi what is the configuration of serial of board hikvision for connect serial
Baud rate 115200, and from computer management you'll need to identity on which COM port the serial connector was attached to!!!!
The pinout of the board do yo know?
@@secpralcomvideo3441 what serial cable I need can you say the model please
Salut!Unde găsesc cablu serial?
Cablu TTL usb
Dear, does this work for an NVR?
Yes it works
@@secpralcomvideo3441 Thanks, I need to downgrade to model nvr ds-7616ni-k2 / 16p, will it work?
@@NiceSoftkey there are high chances to work from experience
@@secpralcomvideo3441 Thank you very much, I only need the serial connector, I will try
I started the process but I only got signs and letters in the PuTTY app. Could you possibly help with this?
Change speed
Baud rate
bad boy