Not tight at all! The book torque is silly low I think. If they leak then I can tweak them up a little. A tiny smear of non setting sealer on the covers and nothing on the seals under the nuts 👍🏻
Great work..so awesome..ive had my mr2 supercharged 4agze sitting for years as well..motivated to get it running again this year..going to have to do this in depth detail to the engine..this 4age sounds so sweet.
My eyes have no doubt been glued to every episode one after the other. I have not to long ago, got an 1985 mr2 in need of some work, and these videos have made me so anxious to get it started. Mine has weber/delorto carbs currently. Thank you for the videos you done a super job. Keep it up. Will sure be watching them all again
Amazing job Unbelievable finish!!!👍👍 it has inspired me to do my 1991 celica with the 2.0 3sge engine & its thsnks again & good to it being done by a diyer like myself in there home garage!!! Well done!!!👍👍👏👏👌👌🏆🏆
Amazing job! And now I see why I was right to be terrified while changing my last battery (not a mechanic)... yeesh, hate electric! Mine looks just like the 'before', sadly! Fantastic video.
Hey I am just seeing this video for the first time and have a question as i'm a little noob to this. So in the comparison made at about the 9 second mark there is the bracket looking thingy (not sure what exactly its called but I thought I heard someone call it a spider bracket once, idk) but its the piece that has a wire running over your spark plug wires and its covering the valve covers, and in the finished comparison it has moved but I didn't know you could do that and was wondering how? Was there anything special you had to do?
Hi, I made my own throttle cable relocation bracket. I have done a video on how to make one. It’s in the playlist for the mr2 restoration I did on this car.
@@Resto.Nation I'll prob be posting a video up once everything is finished here: ruclips.net/channel/UCjJij2eAz5kyMYI0tJV7nQQ Your video is very helpful to the AW11 community, thank you!
@@Resto.Nation how much would you charge to do something like this? I have no idea how to take apart/rebuild it all but would love a helping hand to reach me on my MR2
Well done you have done a fantastic job and another MK 1 saved. 👍
Cheers mate I’ve loved every minute. There’s loads more out there to save too....
Resto Nation Can I ask what did you torque the 8 nuts on the covers too and did you use any sealant at all? Thank you.
Not tight at all! The book torque is silly low I think. If they leak then I can tweak them up a little. A tiny smear of non setting sealer on the covers and nothing on the seals under the nuts 👍🏻
Resto Nation Many thanks for all your help. 👍
Time is never free. It's the valuable resource you will have and it passes by unstoppable. Your time is a limited gift and its running out.
It’s also the one thing you can’t buy…
Awesome video. Once I'm done removing a ton of rust my my MR2 I hope I can get my engine bay looking that nice.
Great work..so awesome..ive had my mr2 supercharged 4agze sitting for years as well..motivated to get it running again this year..going to have to do this in depth detail to the engine..this 4age sounds so sweet.
gaves1nerisma thanks mate. Supercharged sounds sweet! They are a sweet engine for sure. So far ahead of its time. Good luck...
Great video, I have really enjoyed watching all the videos, you explain stuff really well, I want an MR2 Mk1 !!
Do it! They’re good fun cars...
Yoooo that last bit of footage 😬
My eyes have no doubt been glued to every episode one after the other. I have not to long ago, got an 1985 mr2 in need of some work, and these videos have made me so anxious to get it started. Mine has weber/delorto carbs currently. Thank you for the videos you done a super job. Keep it up. Will sure be watching them all again
Thanks. Glad they have been helpful and inspirational. I bet a 4AGE sounds wicked on Webers!!
hi mate,i would like to see you rebuild 4age engine with proper way step by step, by the way,nice video. keep it up
Mr BaNDiT cheers mate. I haven’t got a spare 4AGE but if this one does then I will do a build series on it...
Amazing job Unbelievable finish!!!👍👍 it has inspired me to do my 1991 celica with the 2.0 3sge engine & its thsnks again & good to it being done by a diyer like myself in there home garage!!! Well done!!!👍👍👏👏👌👌🏆🏆
chunne Chaser thanks mate! This whole build has kept me busy in my spare time and I’ve loved every minute of it!
Great job, mate! 💯
Looks ace! Where did you get the coloured silicone vacuum lines with that little blanking thing on the throttle body?
Thanks, all the vacuum hose is standard 3 or 4mm hose cut to length. You can get silicone caps the same size.
Amazing job! And now I see why I was right to be terrified while changing my last battery (not a mechanic)... yeesh, hate electric! Mine looks just like the 'before', sadly! Fantastic video.
You always connect the positive pole first and disconnect it last to avoid this happening
@@Racing_Fox413 Indeed. NP (to remove) -> PN (to replace). Or more easily.. Naughty People Pick Noses!
Definitely inspiring 👏
Looking Good!
Man I hope I get an mr2 one day
Do it! They are great little cars
@@Resto.Nation would love to, but I've got to get my license and a few years ncb's first sadly
@@siggy2609 buy it. Store it. Drive it when your older. Better than money in the bank 😎
So much work. Sadly, worth it though
Only if you want something different. You can buy an off the shelf relocation bracket for less than £20 I think.
Hey I am just seeing this video for the first time and have a question as i'm a little noob to this. So in the comparison made at about the 9 second mark there is the bracket looking thingy (not sure what exactly its called but I thought I heard someone call it a spider bracket once, idk) but its the piece that has a wire running over your spark plug wires and its covering the valve covers, and in the finished comparison it has moved but I didn't know you could do that and was wondering how? Was there anything special you had to do?
Hi, I made my own throttle cable relocation bracket. I have done a video on how to make one. It’s in the playlist for the mr2 restoration I did on this car.
Hello, where did you jump to prime the fuel pump? Also which ones did you jump? Thank you
Hi, the diagnostics box on the rear firewall. Pins FP and B+ 👍🏻
@@Resto.Nation Thank you so much for the reply! Currently detailing my engine bay like yours :)
@@TheBilliardCorner great stuff mate! Get the pictures up online after. Insta or faceballs?
@@Resto.Nation I'll prob be posting a video up once everything is finished here:
ruclips.net/channel/UCjJij2eAz5kyMYI0tJV7nQQ
Your video is very helpful to the AW11 community, thank you!
@@TheBilliardCorner subscribed 😎
Where did you buy those paint cans? Which brand are they?
Just stuff I had in the garage. Mainly Halfords I would expect.
Are you in the british gas advert?.
Yes mate.
Is the MR2 in the British gas advert? :D
Hi do you have Passenger's (USA )
DOOR CONTROL Module 85980-17010
Power windows/power lock
THANK YOU
TANIA
Wish you could do mine..
please let me know if u can/interested
There is always a possibility. Once the garages are built and you see me back to full filming and building then message me and we can work it out
@@Resto.Nation how much would you charge to do something like this? I have no idea how to take apart/rebuild it all but would love a helping hand to reach me on my MR2
Blablablabla blablabla and blablabla