Cylinder Head Assembly 1.6 TDCi / 1.6 HDI

Поделиться
HTML-код
  • Опубликовано: 12 дек 2024

Комментарии • 25

  • @rudger1913
    @rudger1913 Год назад +1

    Hej. Po akcencie czuje ze PL. Spoko wideo. Wkoncu zrozumialem skad mam delikatny wyciek przy wtrysku.

  • @marcinstanuszek5481
    @marcinstanuszek5481 Год назад +4

    Nice job, detailed explanation thanks!

  • @dertyp5891
    @dertyp5891 Год назад +1

    Satisfying Job man! ✌️

  • @aelc4tdim858
    @aelc4tdim858 5 месяцев назад

    Excellent, just what i was looking for.
    Can i ask doses high pressure fuel pump needs to be removed for head to come off?
    Also ,whats the torque settings for head bolts.
    My engine is 1.6tdci ,for engine code t1db.
    Did you get your cylinder head pressure tested and skimmed.
    Thank you

  • @stephaniepage1004
    @stephaniepage1004 10 месяцев назад +1

    Hi, can i ask how long it took you roughly? wondering if its something i should get a garage to do or do at home (have done others but not this engine) thanks

    • @the-senior-tech
      @the-senior-tech  10 месяцев назад +2

      Removing, cleaning and installing head around 12hr.

  • @donideniro3185
    @donideniro3185 5 месяцев назад +1

    Hallo, erstmal gute arbeit, habe das gleiche bei meinen grand picasso 1,6 hdi gemacht, alles soweit richtig nur springt der nicht an dreht nur. Muss ich den kraftstofffilter vorher füllen ? Gepumpt habe ich es scheint das der kein diesel bekommt hmm

    • @the-senior-tech
      @the-senior-tech  5 месяцев назад

      You need to bleed the system, ideally with a vac bleeder.

    • @andriesrametse2764
      @andriesrametse2764 2 месяца назад

      ​@@the-senior-techthis is the correct way lines should

  • @davidrollason3315
    @davidrollason3315 Год назад

    Hi we are having problems with our ford transit connect, with the timing settings the belt lost most of the teeth so we have checked the top end of the engine and that was fine except 2 rocker arms which we replaced all and we have set up the timing belt as you have and when we try to start it, it will not and we have noticed at the air filter it blows instead of sucking any advice cheers Dave 👍🏻

    • @the-senior-tech
      @the-senior-tech  Год назад +3

      Check camshaft. After valve-piston collision in these engines the lobes spun.

    • @vehtech9699
      @vehtech9699 2 месяца назад

      Any updates on this issue? I have the same issue car won't start and pops out the intake or turbo, rechecked timing can't be 180° out as timing pins lines up everytime u turn crank 2x rotations.

  • @tommi59tk
    @tommi59tk Год назад +1

    Hi at 6.35 there are placed tiny orings between rockers how they are called what for and what is part number?Anybody knows? I will need to replace silicone under camshaft cover

    • @the-senior-tech
      @the-senior-tech  Год назад

      Hi, Part no 2S6Q-6L623-AA. They seal camshaft oil feeds.

    • @tommi59tk
      @tommi59tk Год назад +1

      @@the-senior-tech thank you very much

    • @tommi59tk
      @tommi59tk Год назад +1

      @@the-senior-tech Can I get it seperately or is in head gasket set only? What is the size of the orings they are special one? Can I get ireplacement in any car parts shop?

    • @the-senior-tech
      @the-senior-tech  Год назад

      I used standard 6mm o-rings.

    • @tommi59tk
      @tommi59tk Год назад +1

      @@the-senior-tech THANK YOU

  • @EnricoPalazzo
    @EnricoPalazzo Год назад +1

    Could you tell me, why you decided to remove head? I have the same car and engine, and it's eating some coolant with no leak outside :c That was worn head gasket in your engine too?

    • @the-senior-tech
      @the-senior-tech  Год назад +1

      Hi. It was pressurizing the cooling system and overheating the engine.

  • @andriesrametse2764
    @andriesrametse2764 2 месяца назад

    hi how is your tdc on this engine

  • @donideniro3185
    @donideniro3185 2 месяца назад

    Hallo meister, hab den selben motor 1,6 hdi 2015 grand picasso, es ist alles neu, zylinderkopfdichtung, agr kühler, kopf wurde abgedrückt geplant, der motor läuft sauber aber baut druck auf im kühlsystem, es sind abgase im kühlwasser.
    So jetzt weiss ich nicht wo der fehler ist
    Was meinen Sie ?
    Viel.geld investiert und alles umsonst hmm scheisse

    • @the-senior-tech
      @the-senior-tech  Месяц назад

      There is a problem with the cracking block.
      You need to check the cylinder bores for a small crack close to the top of the cylinder.
      All the best

  • @Franciscojsuarez
    @Franciscojsuarez Год назад

    Tutorial detallado : ruclips.net/video/805izH2Lflg/видео.html