(Full tutorial) Autodesk Revit Tutorial: Creating twisted façade family in Revit
HTML-код
- Опубликовано: 29 сен 2024
- This tutorial video shows how to create twisted façade family in Autodesk Revit. Fachada Liverpool was used as a case study.
This facade family is available to download here.
facadefamily.e...
Enjoy!
#AutodeskRevit #Tutorial #FacadeFamily #Facade #Revit
Our Facebook page: / dbive
Music : LiQWYD-Summer nights
Revit does not allow angle measurement at the beginning of the rectangle and the end of the rectangle
How do you do that?
In 3:20.
In 4:10.
Hola! Tengo el mismo problema, ¿pudiste resolverlo?
'figured it out. before u press the line, press the tab key first to align the square guide
Me too , do u know how?
hello sir, how to solve "Constraints are not satisfied" when i typed desired angle number example angle 2, I typed 20 deg and it showed those notification. thankyou
Set the reference plane correctly.
At 5:20 its shows me constraints are not satisfied
when you're applying the measurements make sure you're picking the lines and not the points
Wow 🤩 very good i will try to implement the idea in my graduation project ..
I can't find the (Metric Generic Model Pattern Based.rtf). Can you help me by send it? or from where I can download it?
I have a submission coming up this weekend can u plz share the file with me.. i tried making the facade bt too many issues... Plz help by sending the file ..thanx a ton
A1 and A5 are OK, but A234 I can't rotate at CENTER, They moved when I typed parameter angle. Plz help.
i got a warning "Mass contains only mesh geometry, which can't be used to compute Mass Floors, volume, or surface area." what should I do?
HI, AT 4:38 HOW DID A HEXAGON TURNED UINTO SUARE?
Hello, Once you click on hexagon button you will see "Sides" on green tab under the ribbon tab. You can put 4 in the "Sides" tab. You will get a square.
bruh same, I don't get that
I figured it out, u double click on the hexagon and then there should be a green bar that appears, u just change the points from 6 to four.
when i add mine to the project it doesnt look like yours its a bit different like yours looks so centered and the twist part is exactly in the middle for me no
quite an issue the fact that you cannot place the rotation to 0 degrees. But thanks a lot for the tutorial, extremely informative.
I feel that this shows one of the many limitations of Revit.
4:39 😅 why it doesn’t looks like u square shape
how did you change the direction of work plane at 2:20 ?
Hello, press tab button on your keyboard.
@@dbivelab thx - i hope this is the reason why it wouldnt select the horizontal line down the track.... I give it another go and hopefully it'll work for me now
@@dbivelab OMAIGOODDD CANT U MENTION IT EARLIER IVE BEEN TRYING IT FOR 5 TIMES IN A ROW
I am facing I problem when I am applying angle afterwards the reference has changed...
Could you please share it with me I would like use it in my school project thanks, good job by the why you rack!
Hello, at 3.18 it does not let me select the horizontal and vertical reference line at the same time. Please help. It seems to work for every line apart from the end ones
I think you need to check if the work plane on the reference lines are on correct side.
I have the same problem😢
3:22 here does not work with me
hello, when i change the angle from 90 to 20 degrees, the rectangle is not set in the middle it shifts to the right point, can you tell me what to do
Heeeelp i have the same problem pls :)))
how
Did you find out????
Thanks for this amazing tutorial
hi there, i'm having an issue with this family: i have no way to hide the hosting surface: even when assigning a transparent material the lines are still apparent, can you please suggest a solution?
ok solved, in all views just shut off the FORMS subcategory under the MASS category :)
I can't angle it like he does in the
video 4:25
hai, why i can't click the line for add radial? i hope u read this one
@@nabilahanin3092 why? i have no idea.
How 4:16
How did you rotate it 😮? Please can someone tell me
Im not able to change the angles, it says constrains are not satisfied
Me too
@@fizaamimkhan5135 Yes, I did this step, but also don't let up ☹️☹️
@@_nok.1155 Okay a few things I figured.
1. Make sure you're aligning the perpendicular line and locking it as shown at 3:05.
2. Select a reference plane on the perpendicular line before giving angular dimensions.
3. Select the perpendicular line's reference plane (same ref. plane as above) while making the square.
Hope this helps!
I am not able to change the angle
how to render it?
¿qué hago si se ve todo color gris y no puedo cambiarlo?
amazing, but how can you use the pattern for curve surfaces/face?
Thanks, please wait for other tutorials in the future
you can also find how to create curve façade in this tutorial ruclips.net/video/DpqNFWNjGSY/видео.html
and this tutorial ruclips.net/video/hxjLz5Sz1R4/видео.html
Plz help
I can't find the (Metric Generic Model Pattern Based.rtf). Can you help me by send it? or from where I can download it? Can you please help me?
Hello, maybe you need to install family library please find it here www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/Where-to-find-Revit-Content-Libraries-to-download.html
😮
Does it matter if I make my family in m and put it in feet project? because is not showing on my project
I think it's better to change unit to feet before creatin the family.
Hello, tutor. In 5:48 Program show "Constraints are not satisfied" How should I do?
I have the same problem
Me too
Hello , There is no box for width , can you help please 🤕
Hello, check if you tick "Type" or "Instance" in parameter properties?
Muy ingenioso
Thanks ❤
Is it possible to make it work in the horizontal way instead of vertical one?
Yes, it's possible. Try putting on the angle value on grid rotation.
I am not able to place that in my model I made the whole model as shown in the video
why? If you follow the steps in this video, It should be the same result.
Can u share me the family edited
I can't find the (Metric Generic Model Pattern Based.rtf). Can you help me by send it? or from where I can download it?
Sure, I can send you. Please send me your email.
@@dbivelab could you send me the file to me too? please
Hello! Amazing tutor, how do you change material of this facade?
Hello, change material in Materials and Finishes
excelente video...
If I have doors and I want to make void, is it possible to do that? And could you tell us how?
Hello, let me check if it is possible.
@@dbivelabdid you check it yet? It's been months 😅
Thanks man love u
❤
Great Tutorial. waiting for more.
hi how do i adjust the height of it according to my building
You can create the surface height the same level as your building height.
im sorry, may i ask how do i do it?
Thx
08.59 hello, I can not apply the panel to the facade. What to do?
Why? if you follow along the video. It should be fine.
the panel is placed only horizontally
@@rev6hull Can you rotate it using rotation parameter?
How to apply the material?
amazing work ♥
excellent.
Thanks!
Can this be done on curve mass
I am not sure.
It says "Constraints are not satisfied". What should i do.
Hello, try to fix it following this forums.autodesk.com/t5/revit-mep-forum/constraints-not-satisfied-error/td-p/4522755
@@dbivelab oh thank you so much!!
@@berensucakmakoglu864 did it work? looking into the Revit forum?
@@emanueltwumasi884 I already used another method, I started by using Curtain Panel Pattern Based Family! :)
I need this family please
Do you still need it ?
@@somi2178 may i ? hehe
@@somi2178pasa la familia ya que al principio y al final no deja medir los angulos
thank you!
great job!
❤❤
1:28 how u do that?
Hello, you just follow along the video.
😍Спасибо большое, прекрасный видео-урок🥰
благодарю вас ❤
amazing
thank you
nice one
Thank you
@@dbivelab i have an issue regarding to the midpoint dot, apparently, the dot i put is only for vertical, many times i tried to make it horizontal but, still horisontal.
Nice tutorial...can you pleaae add voice for explanation....
Hi, i will try.