How to Check Router Optical Power. Optical Power High Or Low ले गर्दा हजुरको इन्टरनेट Slow हुनसक्छ !

Router optical power refers to the strength of the optical signal transmitted over fiber optic cables, often used in internet connections. If the optical power is too high or too low, it can indeed affect your internet speed and performance. To check the router's optical power and address potential issues, you can follow these steps:
Check the Optical Power Levels:
a. Log in to your router's web interface. You can do this by opening a web browser and entering the router's IP address (common addresses include 192.168.1.1 or 192.168.0.1) in the address bar.
b. You may need to enter your router's username and password to access the settings page. Refer to your router's documentation for the default credentials.
c. Once logged in, navigate to the optical or WAN settings. The exact location of these settings can vary depending on your router's make and model. Look for sections related to the fiber optic connection.
Check Optical Power Levels:
a. In the optical or WAN settings, you should find information about optical power levels. The values are usually measured in dBm (decibels milliwatt) or dB (decibels).
b. You will see a "Receive Power Level" and "Transmit Power Level." These values indicate the strength of the optical signal received and transmitted by your router. High or low power levels can cause issues.
Ideal Optical Power Levels:
a. Ideal optical power levels vary depending on your specific setup and the equipment you're using. However, in general, optical power levels for most routers should be within the range of -8 dBm to -15 dBm for receive power and -2 dBm to +2 dBm for transmit power.
b. If your levels are significantly outside of these ranges, it could indicate a problem with the optical signal.
Troubleshoot and Solutions:
a. If the optical power levels are too high, it might be due to excessive signal strength. You may need to add an attenuator to reduce the signal strength.
b. If the optical power levels are too low, it could be due to signal loss or a damaged fiber connection. Check for loose or damaged fiber optic cables and connectors.
c. Contact your internet service provider (ISP) if you're unable to resolve the issue yourself. They may need to send a technician to address the problem.
Remember that the exact steps and terminology might vary depending on your router's make and model, so it's essential to consult your router's manual or contact your ISP for assistance if you're unsure about how to access and interpret optical power levels. Properly configured optical power levels are crucial for a reliable and fast internet connection over fiber optics.
#router
#router_optical_power_check
#Netslow
म के गर्छु भन्ने बारे थप जानकारीको लागि मेरो च्यानल FOR MORE INFORMATION ABOUT WHAT I DO VIST MY CHANNEL
❤️ khushientertainment6160
यदि तपाइँसँग कुनै प्रश्नहरू छन् भने? एउटा सन्देश छोड्नुहोस्IF YOU HAVE ANY QURIES ? DROP A MESSAGE
📩[e-mail]
Myself : BHIM PANDEY
From: LUMBINI KAPILVASTU NEPAL
🌍Check our website -www.khushientertainment.com
📕Add US on Facebook: { / khushi500000 }
TIKTOK- / bhimpandey_khushi
यदि तपाइँ टेक्नोलोजीमा विशेष रुचि राख्नुहुन्छ भने कृपया subscribe to 'KHUSHI ENTERTAINMENT' channel.
THANK YOU धन्यवाद
-----------

[@lalitone6126]

Mero ma 22dbm samma pugxa thik ho?

[@Viratt18]

-27dBm saama thikai ho

[@khushientertainment6160]

Tik chha sir teso baya tq ....

[@ashimstha]

-17dbm ramroi ho??

[@khushientertainment6160]

tati na ramro banna mildina
Best baneko -18 dekhi -28dbm sama maninxa.....17 dbm chha bane fiber halka band garerw 19 20 21 samma banaunua ....

[@gurudevyadav6980]

Subisu ko strong optical power kati hunu prx

[@khushientertainment6160]

Thank you for comment
Subisu ko matra na bayara sabai isp ko strong optical power aautai hunchha....
Optical power ma -21dBm best power ho.
Thank you

[@lalitone6126]

-20 Dekhi -22 samma aauxa mero ma thikai ho?