This Mining Motherboard Confuses Me
HTML-код
- Опубликовано: 6 сен 2024
- In this video I walkthrough my custom frame build for my ASRock H510 Riserless Mining Motherboard.
Product Links:
▶️ ASRock H510 Product Page: www.asrock.com...
▶️ Buy ASRock H510 Motherboard: www.aaawave.co...
▶️ CPU: amzn.to/2YKl9pP
▶️ RAM: amzn.to/3FDBL3I
▶️ 3D Printed Motherboard Standoffs: www.paypal.com...
Links to support me:
▶️ Red Fox Crypto Discord: / discord
▶️ Awesome Miner Referral Link: awesomeminer.p...
▶️ Hive OS Referral Link: geni.us/Hv4AX5
▶️ CoinTracking Referral Link: geni.us/IjAa
Crypto Miners:
📺 BitsBeTrippin: / bitsbetrippin
📺 Voskcoin: / @voskcoin
📺 Red Panda Mining: / @redpandamining
📺 Hash Raptor: / @hashraptor
📺 SerpentXSF: / serpentxsf
📺 SavageMine: / savagemine
📺 Guntis Vitolins: / talibanfighter123123
📺 The Life of a Miner: / @thelifeofaminer
📺 ChumpChangeXD: / @chumpchangexd
📺 Altered Component: / @alteredcomponent
📺 The Hobbyist Miner: / @thehobbyistminer
📺 Mining Office: / @miningoffice
Follow me:
✅ Twitter: / redfoxcrypto
Mining Rig Parts I Use:
▶️ 6-GPU Frame: amzn.to/2QnFVbi
▶️ 8-GPU Frame: amzn.to/3odxuM8
▶️ Risers: gpurisers.com/
▶️ Risers: amzn.to/2WumPmA
▶️ PCIe Splitters: amzn.to/3sHc5N8
▶️ MOBO: amzn.to/35IGJfc
▶️ CPU: amzn.to/35mjxDr
▶️ PSU: amzn.to/3hT6GNX
▶️ RAM: amzn.to/3nvhiUE
▶️ HDD: amzn.to/3cBAn5q
▶️ Test Bench: amzn.to/2RUxnZS
▶️ PDU: amzn.to/3eIQP4K
Grow Tent Setup:
▶️ Old Tent: amzn.to/398mhFz
▶️ New Tent: amzn.to/3ofFmwB
▶️ Inline Fan: amzn.to/3bhHtLS
▶️ Ducting: amzn.to/3hVvqW2
Power Meter:
▶️ DROC AC Power Meter: amzn.to/3pWD19s
▶️ SpaceGoats DROC Power Meter Build: • Building a 120v Meter ...
As an Amazon Associate I earn from qualifying purchases.
#GPUMining, #ASRockH510, #EthereumMining
Do you have this motherboard? What kind of build did you do with it?
Yes, and use them for RX6600 series, have a single riser on the usb mining port, and may add one more on the M.2 port too
@@splynk1 let me know if the M.2 Port works really interested to see...
Hey red fox I have the same MB, everytime i boot i hear 5 beeps has it ever happened to you?
@@reybigcena i have dropped using it, as im putting a disk there to minimize wireing, and the space to get the USB up from the adapter and to somewhere usefull is at best limited. so ill settle for 7 cards, too bad that there are soldering spots for several more mining ports on the motherboard that are not sldered in
@@reybigcena I get them too, i think theyr just boot beeps, and they might be turned off in bios. Ahh one more motherboard ordered, dropping in tomorrow :-) having issues getting the Celeron CPUs thou
Great Video! I need to jump into getting this board up and running. Heading to home depot today to buy some aluminum angle to see about building something custom! Great Tips!
Looking forward to seeing what you come up with my dude.
I’m using one of theses board but with risers, I couldn’t make temps ok with all the cards close together. :(
I use riserless motherboards, good fans are a must, and you need to push the air through the cards and create a tunnel, not let it escape. Much like what a server case does.
Love the videos, keep them comming.
Thanks buddy! 100% agree.
I bought this motherboard, I bought a custom rig Frame from a NL shop called Qrig , I bought it because I would not need to buy risers, and adapte-se to turn on the other power suplllies
Awesome stuff, I like your solution. I bought this mother board back in early summer with hopes of putting 6 3070s on it. I foolishly thought the price of 3070s would drop to near retail pricing. So I currently have it running with 3 1660 ti cards ( still waiting for those good gfx card prices lol).
Haha we might be waiting a while!
I got a 3070.....of course as a newbie no one told me about LHR cards .....make sure you get the right one....lol
@@deannesmith5830 go for dual mining!
I was thinking of buying this and just put 3 cards on slots 1-3-5 so they have room for airflow.
I bought one of those btc t37 boards off ebay and just use risers with it so I can separate my cards for better airflow. I find the cpu side of the motherboard still lines up with the first few standoff holes on the frames and I just designed some 6mm high 3d printed standoffs for the rest. Awesome motherboards for the price
Awesome dude thanks for sharing and thanks for watching.
Whats the performance diff w nd w out risers?
I love riserless, I have a Minebox12 with only 6 cards in it and it stays ice cold and has run nonstop 11 months without even one restart
Nice dude! Just got a minebox and it looks awesome. Can’t wait to drop some GPUs in it.
its like BTC-T37 but better. if u looking for a good case, use one for the BTC-T37 (150Bugs)
Build a sheet metal or aluminium box around it (like the octominer etc) and have some powerful fans blow fresh air through it
Yea I haven't used any mining specific boards man, weird that it doesn't fit in a server case :-o
This is another high quality video and high quality track from my fav crypto miner - great job man ! Love your work
If the 3080 GPUs are LHR, I mine flux to keep memory temps low or at least lower than the memory taxing other algorithms.
I have this motherboard and I'm looking for a case.
You and me both brother.
Корпус для материнской платы самодельный?
Tried to build my first rig with this MB failed coz after connecting all cables it just beeps non stop and screen is blank without loading the BIOS set up. Any advice or suggestions ?
Great Vid Mike, pure quality information
Yeah lol definitely gonna need delta fans. I've got 1 onda 8 card riserless boards, but I actually prefer the btc-t37 and s37 boards. I've been using those cheap $50 ebay mining frames (with a bit of customization). I put the board and cards on top and the psus on the bottom. Delta fans in back
Haha yeah dude. Thanks for watching buddy. Fan upgrade imminent.
Thanks for doing another video on this board, have you managed to find an actual case that can maybe fit this? idk if i can drill and do all that stuff XD if a pro like you is confused, imagine me xD
Great Video! Now I have more questions than answers. Most importantly if I'm going to run this with 3x 3090's and 3x 3060's are you finding this stable with Hiveos for that setup with the current bios?
Neat custom job! It’s the Wild West out here 😜
Haha thanks buddy!
Bought one like this, S37, for A2000’s since they wont need pcie adapters get full power from PCIe slot. This is ideal GPU for this board given limited # of PCIe cables fromATX PSU’s. Like Hobbyist is about to do, built frame from some plank wood and aluminum angle. Sadly the mobo PCIe slots don’t allow space for the io brackets, so u need to elevate the mobo as you’ve done.
Ah nice dude if my A2000s ever ship they’ll probably go on this board.
@@RedFoxCrypto Hah same…it’s built waiting on those…has a 3080Ti and a 6600 keeping it warm for now 👍
That GPUs are too close - hot air bouncing from the MB and entering back into fans. For the side fans, you can 'stack' another four fans to push air even stronger across the whole thing.
Yeah man. I want to redo the thermal pads and retest as well. Or just replace with lower tdp GPUs.
@@RedFoxCrypto I moved all my rigs into basement, from cca. 25C to 15C and got more hashrate on ETH. Just by lowering room temperature. Not much, maybe 1%, but every percent is worth.
Thanks for the video, could you make a wiring diagram? I am in doubt with the second source of food. I want to use this MB with 6 RX 580
This board is just begging to be filled with a couple Nvidia A2000 cards since they only need to be powered through the mobo. The cards are also a lot slimmer so spacing wouldn't be a problem like other cards. P.s. I think I remember Red Panda mentioning you can get a 6 pin to molex for server psu so that may be a better solution than 2 atx power supplies.
Hola, tengo instalada esta placa con 4 GPU's pero tengo el problema de que cuando instalo una mas, 5, el sistema no arranca, da 8 pitidos (bip, bip,........) y no hace nada mas, no se ve nada en la pantalla. He seguido todas las instrucciones, he actualizado a la version 1.30, he cambiado la configuracion de los PCI a Gen1 y tambien a Gen2 y no lo consigo. ¿puede alguien ayudarme??, gracias
What about coming up with a design on a 3d printer for scoops that force air between the cards?
That's an interesting MB for sure
Confused? You and me both Mike. 🤔🤘🏼
I have this mother board I am making my first rig !
I got a processor i5-11400f lga 1200
Everything is running fan motherboard but when I connect with monitor it says no hdmi signal !
I put gpu 3070ti I tried hdm on mother board As wel as on gpu but still same no hdmi signal even I open the ram and put again but still the same .
Will u kindly help me setting this if possible
Tc
Cool rig, bro.
Thanks, bro.
What is the temperature 🌡️ when you are using with this motherboard?
Were they making boards like that for the v1 3060s.
Also you could try take the plastic shrouds off the gpu's it may drop the temps. I took the shroud off one of my gpus to fit some replacement fans that didnt quite line up, and its my coolest running card.
@@paul.1337 I looked up that board it should work with v1 3060s. I was thinking of it being similar to the X79 - H61 motherboard.
holy strawberries red fox, we're really in a Jam now :O I don't like those molex connectors for PCIE at all, not one bit
LOL
Hey, I got this board and I keep getting the GA104 error on hive OS on all my cards except the first one. Any suggestions?
Trying updating the BIOS on the board first. I had to do this to get more than 2 30 series cards recognized.
NGL MAN........
fucking love learning shit with u :P
@redfox crypto is there any reason why you used the supplemental power port instead of the #2 power supply port or was it just because of its connection location just got 3 more 3070’s too install with the 2 already in the Mobo. Defiantly nervous about the molex. Do you know the part number of the molex pins if so I may be able to find an amp rating.
Hey, what is the CPU powering this board?
Nicely done!!
Thanks buddy! Doesn't beat your ugly vertical rig though!
Ive started building my very first rig with this mother board i had the 3 beep problem and i fixed it with puting a new ram stick in but i cant seem to get a signal with my monitor when i turn on my rig currently im just testing it out with 1 gpu to get it working before i start adding more. You mind telling how you were able to get that rig connected to the monitor?
You raise some good questions my dude
Thanks for watching brother.
Does anyone know if a servercase has been made/adapted for this board?
I still haven't seen anything.
Good Review Bro, Thanks...
Thanks for watching dude.
Great video. I bought the mb just because it doesn't need risers. I build my own rack with aluminium profile, quick and cheap. 😊 The only drawback is that it doesn't work... well... major drawback. All the components run, but I don't get any video signal from the mb or the GPU. I couldn't find any real help. What community would you recommend?
I heard from someone who got this that the HDMI doesnt accept long cable ones, forgot the name but try the short hdmi one on the main board
@@baby333 Thanks, the cable I use is short, so it isn't about signal strength.
@@peterkerschbaumer2775 I can't give you the exact solutions but I can atleast tell you the map, the guy was talking about how he needed a short xr (or something like xlr, i honestly didnt hear him properly but i heard short cable) and disable certain things in BIOS, maybe try googling stuff related to that and see if it works :) GL, he did those before installing the GPUs, whilst installing windows and drivers, bios update etc, he said he needed to do that otherwise he wouldnt get monitor display, so i came back to this video to your comment because i remembered you saying you had that issue xD
Thought about putting a 3080, other card, 3080, other card, 3080? Just to space things out since the 3060ti is a little thinner?
That's a good idea. Why didn't I think of that...
Its a great board for the right GPUs, i got 3 of them sofar, filled with RX6600 and RX6600XT and i dont even need fans, im deffinatly getting more of them. But damn it sucks that they used Molex and not PCI-e, no single PSU today offers 2 strings of Molex, but they god damn offer 3 strings of SATA crap, Im using EVGA and would like to find some Molex strings, as the PSU has 4 outlets,, i just cant find where to buy them seperatly
100% agree with everything you said. How are you mounting the board?
@@RedFoxCrypto I put a MDF Board in the bottom, marked all holes, drilled and screwed in normal motherboard stands in with a drop of superglue. Added 6 fans mounted as yours, works fine as theres better spacing between the RX6600 series cards, but i dont use them, maybe in the summertime ;-)
ive got it.... its my first build of any kind....and i thought it would be easier without risers .....how wrong was i.....lol they really should have brought out a frame to go with it
100% dude. Such an odd board.
Got a board like this from china. Space for 8, but are using risers on it cause the 3090's are to big
Yeah that’s another good option.
👍 top quality content 👍
Thanks brother. ❤️
Hey man, really enjoyed your video, i was expecting it since i have the same mb!!! I have a question that you could help me with. i just bought a second GPU and placed it in the4th PCIe slot so as to have enough air circullation (not using fans yet). Problem is that even if the card gets detected by the mb, nor the miner or the hiveos can utilize it. Using only one at a time at slot 1 is ok. but i can;t make them both work. Im thinking BIOS settings should do the trick. Can you please test it and HEEELLLLPPPP me? Thnaks in advance
30 series card? I had to do a bios update to get more than 2 recognized.
@@RedFoxCrypto That was it!!! thank you!!!
Nice mode man
Thanks for watching.
I have this board also on a custom frame. I can only get 3 gpu to load in windows and 4 to load in hive. screen flickers. maybe its the hdmi monitor plugged into gpu A? Any ideas? Thx
I have 6 rx6600 working fine. The trick for me was using dummy hdmi on all. Without it windows 10 was not booting.
@@danielesetaro4634 Interesting but wouldn't this impact your hash rate with the dummies in place?
@@jasonhollis4136 May be no. The 6 x rx6600 have 175,5 Mhs so a little more then 29 each one. I was not able to do better and if the rig do not start the Mhs are surely lower.....
And another thing....the dummy hdmi was necessary for windows not for the motherboard itself. I am sure ot that. The motherboard have no problems if the gpu are right connected and powered. The bios test on start is very didactic. It is windows that can't handle the gpu and you need to care of it with the dummy hdmi.
it worries me that you are running one single pcie power cable split into 2 to one 3080...
Yeah it's close. 288w max over that cable and those 8-pin power connectors could pull 150w each. Obviously card is power limited down to 230w, but you are right. Do as I say not as I do moment.
bro your discord link is broken
👍
Thanks for watching.
This review sounds like he was forced to do it. Definitely a bad board because of the proximity of each card. Thank you for. Taking the time to review these. Definitely looks like a pass
Forced? Nah. Just have had a bunch of people ask what I wound up doing. Still really enjoy the board but wish there was a drop in solution.
I'm just using risers on it..
How are you mounting the board?
@@RedFoxCrypto oh I'm just using the box as you mentioned 😂
Btw I tried to use the m.2 slot for additional GPU, but it didn't work..
No me gusta