Hey Mr.Judy Gotta few good laughs reading through the comments. Any way glad you are working and uploading in a different environment. Thanks for the lessons.
Greg, great to see projects like these where your experience helps drive it forward. How is that other Arizona grazing project going you shared last year?
Enjoyed you sharing the Arizona project. I look forward to more of this project. Will they begin grazing this winter on the ground or will they wait until after the first of the year?
When a 500’ roll of the 3/4” HDPE pipe is unrolled, will it lay out reasonably flat or does it tend to recoil back into a roll? I’m wondering if I need to lay mine out for a few days before I can work with it. Thank you in advance,
He’s actually putting the tape on the right direction. Not sure why others disagree. You do not want the torn off tape end turning into the threads. It should be tailing behind.
I'm fixing to do this project... So with a frost line of about 24-30" do you have no trouble reaching down in there to hook up And getting that male end to release in what... a 6" riser? My arm is only 24"s and that would be just my fingers pulling that trigger. Thank you.
I always wrap Teflon tape, (PTFE tape, I think Teflon is illegal, too toxic), a little over the edge. I've failed to do that in the past, and had the tape pushed from the threads, bunching up below. Wrapping over doesn't allow the threads purchase on the tape to push it. (I'm an old line hand. We always give 3 wraps of tape).
@@iamchillydogg not really The threads are. Flat at top and bottom. But with mass production you can't tighten them up With lubricant 1 more turn gets the flats at top dropping into the flat at bottom Try a 5 yr apprenticeship You learn this in your first week
Greg, Could you tell me what size pipe are you running ? I've only been able to find the Plassion Agrifit fititngs up to 1-1/4". I would really like to have a 2" main line.
What are the potential impacts from groups of border traffickers and smugglers? Is this a high traffic area for that acivity? If so, what precautions are you taking to protect the line from "coyotes" who will have zero compunction about cracking open those couplers to get a drink for a band of thirsty travellers ? Private property owners along the border will tell you that northbound groups care not a whit for the property and infrastructure they encounter along their path and will do what they need to do in the harsh desert. Is there some kind of meter set up to tell you if the water flow suddenly turns up full blast and doesn't stop? That could serve as a warning for the managers so they can get out there with a team to walk the fence and replace any coupler(s). Will you instead leave a male attachment in each coupler which would allow passing groups to simply drink from the connection, removing the necessity of simply smashing the coupler and the resulting costly losses of water and replacements?
Sounds a lot like certain westbound groups that landed on the east coast a few hundred years ago @ "Private property owners along the border will tell you that northbound groups care not a whit for the property and infrastructure they encounter along their path and will do what they need to do in the harsh desert."
Looking forward to seeing how this project goes over the years. Hope we get some regular updates. Good luck to all who are involved🍀🇦🇺🌅
It would be great to see an update!
I have over 20 of these installed on the farm now thank's to Greg. So cheap and easy and changed the grazing efficiency immensely. Thank you!
So awesome to see this! I love these extra farm projects
Wow thanks for telling us about putting the connections every 500’
Greg, you are a high quality teacher. I really appreciate your videos. Following this project closely.
Are you telling me Greg Judy’s going to grow grass in the desert
Hey Mr.Judy
Gotta few good laughs reading through the comments. Any way glad you are working and uploading in a different environment. Thanks for the lessons.
Greg, great to see projects like these where your experience helps drive it forward. How is that other Arizona grazing project going you shared last year?
Best explanation of how you do water points. Keep them coming
You are a great teacher and very inspiring!
Where in Arizona? I'm in Buckeye. Heck Greg, stop by and have some lunch!
Good Day!
We use "saddles" to install the quick couplers at locations other than pipe joins. They are much cheaper than joiner T's.
www.polypipe.com.au/category9_1.htm
That’s good info. There’s always more than one way to solve a problem. Thanks for sharing.
These things are to cool. Gonna get some of these one day.
I will look for updates on this project.
Really enjoyed this.
Enjoyed you sharing the Arizona project. I look forward to more of this project. Will they begin grazing this winter on the ground or will they wait until after the first of the year?
As soon as they get the water and electric hooked up.
@@gregjudyregenerativerancher will you be able to have any follow up videos of this before project? Hope so
two ptts fire and trees
Thank you Greg this Video is very informative.
When a 500’ roll of the 3/4” HDPE pipe is unrolled, will it lay out reasonably flat or does it tend to recoil back into a roll? I’m wondering if I need to lay mine out for a few days before I can work with it. Thank you in advance,
3/4” is easy to work with. 1.5” diameter pipe is much more challenging!!!
Click on the ads for Greg and Jan.
Thanks for the info. What if I want to supply my pasture with two inch pipe so I can supply a large sprinkler. Do they have 2 inch couplers?
Not that I'm aware of
That looks like some prime grazing land for there, a high stock density of 2 cow/calf pairs per 500 acres. lol
LOL. But when they’re finished they’ll have enough grass for 2 cow/calf pairs per half-acre.
He’s actually putting the tape on the right direction. Not sure why others disagree. You do not want the torn off tape end turning into the threads. It should be tailing behind.
Thank-you!!!
@@gregjudyregenerativerancher aren't you amazed at how closely people follow the vids? I am.
The tape is the right direction but he's holding the roll "upside down" the other way,the the wraps would only take a few seconds...so much easier
LOL. The technique is backwards, not the direction of wrap.
Typical welder. Always arguing with the fitters. LOL. 😉
Excellent project!!, Last year you visited in AZ, You put video and removed it
This is cool! Thank you!
Can you run Hdpe pipe above ground? Or would the sun destroy it? My land is in Napa California near lake Berryessa and it’s really hilly land.
Thank you for showing it can be done anywhere. If it is God's will they can make soil in the desert.
I'm fixing to do this project... So with a frost line of about 24-30" do you have no trouble reaching down in there to hook up And getting that male end to release in what... a 6" riser? My arm is only 24"s and that would be just my fingers pulling that trigger. Thank you.
I always wrap Teflon tape, (PTFE tape, I think Teflon is illegal, too toxic), a little over the edge. I've failed to do that in the past, and had the tape pushed from the threads, bunching up below. Wrapping over doesn't allow the threads purchase on the tape to push it. (I'm an old line hand. We always give 3 wraps of tape).
Teflon is a brand name for PTFE
Where can I find the design of this project?
the riser is a piece of 8" pipe no? like on the ponds?
I could not hear where you can buy the "T" fittings and connectors. Are these typical at your local big box hardware store?
Powerflex Fence Company
Is there a certain type of grass going to be used in this harsh environment? How about trees?
In a later video there are some smallish mesquite trees.
This going on now? I’m out here on vacation. Would love to stop by.
Maybe using a deep ripper on a bull dozer would be cost effective for speeding up the pipe laying
As a fitter
Teflon tape or pipe dope doesn't hold water back
All it is a lubrication so you can tighten a little more
It's so you can take it apart years later.
@@iamchillydogg not really
The threads are. Flat at top and bottom.
But with mass production you can't tighten them up
With lubricant 1 more turn gets the flats at top dropping into the flat at bottom
Try a 5 yr apprenticeship
You learn this in your first week
Beautiful!
Have they been down to see what's happening in the Chihuahuan Desert Grasslands of Mexico @WK0Q ????
What’s going on there?
@@gedwardnelson Mexican Ranchers bringing the desert back to life ruclips.net/video/H1xEvMTnKDo/видео.html
Mup very good. Thanks for sharing.
Is that a 4 inch pvc or 5 inches
Greg, Could you tell me what size pipe are you running ? I've only been able to find the Plassion Agrifit fititngs up to 1-1/4". I would really like to have a 2" main line.
1.5" pipe
جزاك الله خيرا و هداك للإسلام أمين
You wrote that backwards. LOL
Well first off he wrapped the tape the wrong direction....😎
Dang it. I just commented that. Guess I should have read all the comments first. LOL. I
Any different this year.
Cya tomorrow 😀
What are the potential impacts from groups of border traffickers and smugglers? Is this a high traffic area for that acivity? If so, what precautions are you taking to protect the line from "coyotes" who will have zero compunction about cracking open those couplers to get a drink for a band of thirsty travellers ? Private property owners along the border will tell you that northbound groups care not a whit for the property and infrastructure they encounter along their path and will do what they need to do in the harsh desert.
Is there some kind of meter set up to tell you if the water flow suddenly turns up full blast and doesn't stop? That could serve as a warning for the managers so they can get out there with a team to walk the fence and replace any coupler(s).
Will you instead leave a male attachment in each coupler which would allow passing groups to simply drink from the connection, removing the necessity of simply smashing the coupler and the resulting costly losses of water and replacements?
Insightful questions.
He did say there were all kinds of nasties out there.
Sounds a lot like certain westbound groups that landed on the east coast a few hundred years ago @
"Private property owners along the border will tell you that northbound groups care not a whit for the property and infrastructure they encounter along their path and will do what they need to do in the harsh desert."
No tape on plastic.
Yes tape on plastic.
Great video. That’s not the proper technique for applying Teflon tape though.
Thot it was clockwise with the threads. Looked like he did a few extra wraps around the pipe tho.. Surprised it fit when threaded
Steve Aguinaga it’s how the tape role was held while wrapping. Take a look at this. ruclips.net/video/vAYK_LXjubc/видео.html
Wrong direction on tape