I, too, feel like I know you from this voyage! You're a cool guy! You had a really beautiful scenic ride to work. You're an honest guy, I too can do things better at 49 than when I was 18, just for a fraction of the time! 😉 RIDE SAFE!
Why not use epoxy or fiberglass to reinforce the fender at the attachment point with the frame? You can use large washers to spread out the stress on the fender. Why not have a car pace you at different speeds and then you will know how fast you are really going? Looks like a fun ride in good weather. By the way, it will be a mess without fenders in the rain!!! What's it like at night? : )
I'm looking into the trike variant of this machine. I know it'll need some more love but it seems like a way to learn. The other I'm looking at is the Pluto but the Maddog trike is my current top pick.
The 150cc mad dog trikes are awsome great to customize and turn into a show piece im wanting to get one myself i like the red ones alot so much potential good luck be safe.
@@hitmanworldpromotions6798 Thanks, been doing a ton of research since I made this post, I'll admit my pick has change a bit for practical reasons but it's been really cool leaning about the engines these machines use.
I just Ordered 2020 gen IV today, at 51 yrs old lol, i had a honda ruckus that i hooked up from Dorby works over 20 yrs ago, these new ice bears look awesome, seen them in Hawaii last month and i was hooked, i figure i can give my new jeep a break on short store trips, ty for vid👍
The Tank 200 any of them vitacci or other are great Chinese bikes and low regular maintenance and cheap! I recommend the tank 200 out of all the Chinese scooters!
I was going buy one but to low for me! I am getting TKC Ruckus Style 150cc Reverse Trike! Because higher off ground & people can see you on the road when driving!
One of these IS for me. I want to do my part for the environment by getting a motorcycle. But every time I look into it. Somebody I know gets seriously -I do mean SERIOUSLY injured. Plus, I'm almost sixty So three wheels makes a lot more sense. Anyhow. I've been scouting Icebear products in the 150cc to 300cc range. I'm moderately mechanically inclined. So I'm fine with this. I'm trying to get some accurate reviews.Thank's for your much needed, unwashed candor.
@@youtubechangedmyname My worst injury was on a 50cc. The tire came off the rim in a sharp curve at 40 mph. Broken clavicle, bruised adrenal gland, and bleeding kidney.
@@BIZMOTO Depends on the state requirements. In Oregon anything under 50cc does not require a motorcycle endoresment , which means that something like a stock Honda Ruckus you can ride with just a regular class C DMV license. The Ruckus can hit 40mph.
It seems to be about half you guys say these Chinese scooters constantly need work,(like you) even though you say you have had no problems with it, then about the other half say keep the fluids changed and they run forever. I hear more people say they are exactly like the Japanese so , don't pay any more for the same thing.
50cc's usually don't need license anything above that usually yes but people have gotten away with 80cc motorized bicycles I guess just keep your eyes open for any coppers and you should be fine
So it's the common gy6 china goodness, or goood Ness! As on what a mess! Haha, basically about a year or two, then it needs everything, depending on how it's used, and maintained, milage, I'd rather assemble them myself, and seal the wiring , and upgrade as I assemble, cheap Chinese rubber is like bubble gum after a couple years! I'd rather replace ASAP! Rather Than waiting until you are sitting in traffic, or the roadside!
I bought a “Sundiro 125”, pure crap….The valve stuck a couple of times so hard It actually literally threw me off the bike. Stick to Yamaha or Honda for scooters, in my book anyway.
@BIZMOTO I wish i could send you some photos. They haven't changed anything since 2006. I just got one with 5,000 miles and some nice custom speed pick-up work done to it. Nothing silly. All legit, Honda parts!
All Chinese bikes/scooters are off by like 10mph you say can get 50-55 stock I doubt it max more around 45-50 anything after that your killing it. Just like all Chinese bikes mods will be needed to reach 60.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
I almost feel like I know you after having listened to you talking. Haha. Great video. Thank you. 🙂
Love my ice bear just keep up wirh oil changes. Easy to work on i have over 5,000 miles and doing fine
Will this beat a honda ct70 125cc ??
Hi there ! Are this scooter legal in NYC to ride and also do I need License and registration to ride ? Thank you
How do you change the oil
I, too, feel like I know you from this voyage! You're a cool guy! You had a really beautiful scenic ride to work. You're an honest guy, I too can do things better at 49 than when I was 18, just for a fraction of the time! 😉
RIDE SAFE!
Why not use epoxy or fiberglass to reinforce the fender at the attachment point with the frame? You can use large washers to spread out the stress on the fender. Why not have a car pace you at different speeds and then you will know how fast you are really going? Looks like a fun ride in good weather. By the way, it will be a mess without fenders in the rain!!! What's it like at night? : )
is good at night lights are pretty bright
How is it after 4 years holding up ??? I looked at your RUclips channel and didn't see a update on it ...
Still have it? How does it stand up to time?
I want one, but I think I'm too heavy for it. I gotta find one near me and test drive it.
I have a maddog trike 150cc n weigh 336 n it is NOT a problem it barely lowers when i get on it n the suspensions works well too
@@luafaia5113 thanks
Love to see an update video on this scooter.
sold it
@@BIZMOTO how come
Smart man with the decision on the helmet.
I love your rambles haha
I'm looking into the trike variant of this machine. I know it'll need some more love but it seems like a way to learn. The other I'm looking at is the Pluto but the Maddog trike is my current top pick.
The 150cc mad dog trikes are awsome great to customize and turn into a show piece im wanting to get one myself i like the red ones alot so much potential good luck be safe.
@@hitmanworldpromotions6798
Thanks, been doing a ton of research since I made this post, I'll admit my pick has change a bit for practical reasons but it's been really cool leaning about the engines these machines use.
Issue is for me is that the company that makes these is one of the very few that offers any kind of trike.
Cool video. Stay young looks nice out there.
I just Ordered 2020 gen IV today, at 51 yrs old lol, i had a honda ruckus that i hooked up from Dorby works over 20 yrs ago, these new ice bears look awesome, seen them in Hawaii last month and i was hooked, i figure i can give my new jeep a break on short store trips, ty for vid👍
They are fun
Can you link to the mirrors or other parts you've purchased for this that improved it?
agree, would like to find out the end mirrors and maybe the phone holder you have! thanks!
The Tank 200 any of them vitacci or other are great Chinese bikes and low regular maintenance and cheap! I recommend the tank 200 out of all the Chinese scooters!
I'm happy with my maddog it's a awesome bike
Yeah it is a blast to ride
Have you done a lot of work to it?
Say are you having problems with the speedometer if so what did you do to correct the problem
Wisconsin I see you on hwy 50 going towards lake geneva. I live in kenosha. Still have the bike I was looking at getting one my self.
No I don't have one now but I'm thinking about getting another one
I was going buy one but to low for me! I am getting TKC Ruckus Style 150cc Reverse Trike! Because higher off ground & people can see you on the road when driving!
There 3 state & 3 warehouse keep them in stock through China your right. Check out Cajun maddogs they sale lot of them!
One of these IS for me.
I want to do my part for the environment by getting a motorcycle. But every time I look into it. Somebody I know gets seriously -I do mean SERIOUSLY injured. Plus, I'm almost sixty So three wheels makes a lot more sense. Anyhow. I've been scouting Icebear products in the 150cc to 300cc range. I'm moderately mechanically inclined. So I'm fine with this.
I'm trying to get some accurate reviews.Thank's for your much needed, unwashed candor.
Well you can get hurt on small bikes too ....my worst injury was on my little Honda 110 cc and Ive been riding 1000cc bikes for 15 years .
@@youtubechangedmyname My worst injury was on a 50cc. The tire came off the rim in a sharp curve at 40 mph. Broken clavicle, bruised adrenal gland, and bleeding kidney.
Wher you from ? I am from kenosha Wisconsin bro i heve a 2015 icebear Mad dog ruckus fan to drive
My friend can fix you iceberg
is it the 50cc or the 150cc? is it worth it what usualy breaks first?
if u know
150cc the muffler falls apart
BIZ MOTO hmm straight pipe it ? Then ?.
u do realize that most ppl in cars are doing 5 to 10 miles an hour over the speed limit
or more
Well that’s their fault that they are speeding 🤷🏽♂️
I’m in WI too. Do I need a motorcycle license to ride a 150cc Icebear Maddog or just a driver’s license?
You need a motorcycle license anything that goes over 25 mph
@@BIZMOTO Depends on the state requirements. In Oregon anything under 50cc does not require a motorcycle endoresment , which means that something like a stock Honda Ruckus you can ride with just a regular class C DMV license. The Ruckus can hit 40mph.
if you live in Wisconsin you will need a motorcycle license anything that can do over 25 mph in Wisconsin requires motorcycle license
My Maddog won't take any fuel, I've replaced carburetor and fuel pump
I have my name is Gary I'm from Kenosha Wisconsin I want to buy one of them 150 cc mad dog tricks can you tell where I can buy one thanks for the help
www.cajunmaddogs.com/ best seller on the net tell him biz moto sent ya !
I bought mine in Memphis tn
What's the speed limit on the highway you get on? I would want something that would do that, if not a little more.
this bike stock will only do about 50 55
@@BIZMOTO dang will they i might get one to ride for fun
Speedo doesn't read in MPH that's why its off...
Nice bike Biz
ordillyo have you been out enjoying your bike yet
Not yet need someone to help me carry it out down the steps 😂
ordillyo I feel your pain lol
I bet 😂
I am doing research on mad dog scooter & trike!! I got bad knee need trike!!
It seems to be about half you guys say these Chinese scooters constantly need work,(like you) even though you say you have had no problems with it, then about the other half say keep the fluids changed and they run forever. I hear more people say they are exactly like the Japanese so , don't pay any more for the same thing.
they do need carb adjustments or replacements and you have to make sure you tighten all the bolts but in no way as good as japanese
It’s cool but it’s like 200lbs heavier than my 125
Where you buy
Cajun maddogs sells them
any updates ? 2020
TX powersports
by chance do you know what type of cell phone holder that is? thanks!
Do you need a motorcycle license to drive that on the roads
yes
@@BIZMOTO thankyou
50cc's usually don't need license anything above that usually yes but people have gotten away with 80cc motorized bicycles I guess just keep your eyes open for any coppers and you should be fine
Gy6 150cc's for ruckus swaps are stamped 50cc to get past customs 😊
So it's the common gy6 china goodness, or goood Ness! As on what a mess! Haha, basically about a year or two, then it needs everything, depending on how it's used, and maintained, milage, I'd rather assemble them myself, and seal the wiring , and upgrade as I assemble, cheap Chinese rubber is like bubble gum after a couple years! I'd rather replace ASAP! Rather Than waiting until you are sitting in traffic, or the roadside!
ya they do constanaly need work but fun to ride
I have the 49cc and it won’t go past 27mph
I bought a “Sundiro 125”, pure crap….The valve stuck a couple of times so hard It actually literally threw me off the bike. Stick to Yamaha or Honda for scooters, in my book anyway.
I'm from Wisconsin!
sweet!
kuv hlub koj
I wonder do them bike give you any trouble
no pretty dependable
Where can i buy one. I am located in north dakota
cajun maddogs
Venom motor sports.com
Top speed? I’m looking for 55-60
i think you can get it there with very little work
No I go with Japanese not Chinese. HONDA ALL THE WAY
yes if you want dependability Honda all the way. i love Hondas. if you like to tinker then these are fun
@BIZMOTO I wish i could send you some photos. They haven't changed anything since 2006. I just got one with 5,000 miles and some nice custom speed pick-up work done to it. Nothing silly. All legit, Honda parts!
These Maddog bikes aren't that bad. They use an engine that is modeled after Honda's KCW125 engine.
Texas warehouse made them
um no there made in china
ROY WALLS if they were made from my home state I would expect nothing less than 100% perfection but it would cost more as well
Maybe a Texas warehouse put them together?
Ar you ar from Wisconsin
yup
In Wisconsin do u need a motorcycle endorsement for 150cc?
All Chinese bikes/scooters are off by like 10mph you say can get 50-55 stock I doubt it max more around 45-50 anything after that your killing it. Just like all Chinese bikes mods will be needed to reach 60.
Honda ruckus clone
lol abandonment issues