you have real hardwood floors. get a floor sander, spend the time to sand them down and re-finish / re-seal them. that floor will last forever and increase the value of the house more than any other flooring available. don't cover them up.
love the content but man youre wild for finding broken metal in the pan and just slapping paint on it lol. Not mad ill be right here watching when you pull the engine next time!
Priming is the easy part because you can do both the walls and ceilings. Painting not so easy. Walls are colored ceilings are white and then comes the trim! I do this for a living and know what it takes. As far as the floor I'd rent a floor sander and sand the floors then stain them and seal them. Hardwood floors are pretty resilient.
Don´t think it´s easy, after you go thru a renovation ones, you know... . But it´s very rewarding I think. Personally I would keep the hardwood floor, yes it takes some work to refinish them, but it will be so beautifull.
Dj painting the block isn't going to bring any power back to it . I'd be looking at your valve springs closely for broken springs . It's down on power and has spring steel in the sump .
covering hardwood with vinyl is a great way to make your house mickey mouse shit. tik tok brain rot for instant likes due to cheap transformation. - landlord/property manager
Tbh depending on the brand of paint and sprayer that shit clogs up hella bad some times you have to thin it out a hair. So that dude ain't wrong at all.
@hunterhilbert4559 I assume the guy renting equipment is renting airless with interchangeable tips, in my 17 years of painting I've never had a gun that couldn't shoot primer. If he's renting those little cr*p cup ones, makes sense
So there are metal bits in the oil pan and all you say/do is: the engine is not hurt? did you even check everything properly? and y'all know why it was so low on power yet? [did i miss something]?
Yo fk that home depot. They forced you to buy a faulty paint sprayer. Only because the guy didn't want to do the paper work. Take that broken sprayer back 🤣🤣
As a painter my self, I hate the sprays. Cut and roll for life. You get way more paint on the walls rather than a super super thin layer from the sprayer. Plus you spend more time setting up than actual painting.
Your Dad was exactly right they wont rent spray rigs to ppl that aren't painters because you wont clean it properly that's what they think you just lack the experience
So the car runs like shit/makes no power and you find metal in the oil pan but you decide to just throw a gasket kit in it and paint block and call it good?
Comment section always makes me laugh no matter what the content is always a handful of know it all professionals lol. I would definitely have covered the floors vinyl over those floors no way
I think it would have been worth it to buy the cheaper graco unit that lets you put the tube right into the bucket, they are only like $250 and work a lot better, and you don't have to hold all the paint in your hand.
Keep the floors. Good hardwood is so nice, and I'm a carpet over everything kinda guy. My feet are sensitive,.I wear shoes even in an Asian house if they got tile...sorry not sorry!
You better change that head gasket. You had problems on the dyno. Think about making it better an not the same. An listen to ant. Buy a turbo cheap ass.
I was about to comment t the same thing. Wtf is this clown doing.. his hoe of a misses doesn't interest me at all, show the car stuff or stop uploading mate
never broken in a clutch never had issues couple times through the gears on the stands/lift then beat the shit out of it make sure the pedal is adjusted propper should have a 1/4 inch of freeplay and make sure the slave is not keeping pressure on it i have had a 240 slave have a rod that was 2 long and basically had to put pressure on the clutch to get it bolted up and the cluch slipped in high rpm ground the rod down some and good to go
Covering hardwood with vinyl is a sin
Have you seen his ol lady.
@@hendersonwilliamkshe's a sinner😂
Having a teenage boy body and fish lips while posting on OF is the real sin
😂@@hendersonwilliamk
@@hendersonwilliamk😂😂 yeoooo
Covering those floors is fucked, rent a floor sander
DO NOT USE VINYL TILE
SAND HARDWOOD FLOOR
"do we look like we paint?"
Does huffing count?
That 2 hand twist action was out of pocket 2:47 😂😂😂
So nobody thought to put a drop cloth over the floor before painting or sanding? 😂😂
You and Yo lady are killing the renovations on the house. Great job guys. 👍🏼💯👏🏼
you have real hardwood floors. get a floor sander, spend the time to sand them down and re-finish / re-seal them. that floor will last forever and increase the value of the house more than any other flooring available. don't cover them up.
Love DJs positivity, even after finding bits of metal in the motor. The motors not hurt lol.
love the content but man youre wild for finding broken metal in the pan and just slapping paint on it lol. Not mad ill be right here watching when you pull the engine next time!
Priming is the easy part because you can do both the walls and ceilings. Painting not so easy. Walls are colored ceilings are white and then comes the trim! I do this for a living and know what it takes. As far as the floor I'd rent a floor sander and sand the floors then stain them and seal them. Hardwood floors are pretty resilient.
He flipping a house not trying to paint.
Just use a roller and do one room a day, ez af as the home owner.
Don´t think it´s easy, after you go thru a renovation ones, you know... . But it´s very rewarding I think. Personally I would keep the hardwood floor, yes it takes some work to refinish them, but it will be so beautifull.
I recommend spray the ceiling and roll the walls it’s faster
Ayo DJ!! You should investigate haunted places!!
Dj painting the block isn't going to bring any power back to it . I'd be looking at your valve springs closely for broken springs . It's down on power and has spring steel in the sump .
Wtf are you talking about spring steel lmao. It was a tiny ass spring from a seal 😂
17:34 "Guys the goop is laid. Bry I would recommend covering the head when doing this" DJ doesn't even have to try
Graco x17 pro is 700 bucks now. I got it at 500 bucks 10 years ago. Its worth every penny
covering hardwood with vinyl is a great way to make your house mickey mouse shit. tik tok brain rot for instant likes due to cheap transformation. - landlord/property manager
A spray gun that can't spray primer 😂 that's a good one.
Tbh depending on the brand of paint and sprayer that shit clogs up hella bad some times you have to thin it out a hair. So that dude ain't wrong at all.
@hunterhilbert4559 I assume the guy renting equipment is renting airless with interchangeable tips, in my 17 years of painting I've never had a gun that couldn't shoot primer. If he's renting those little cr*p cup ones, makes sense
@swldg814 for sure id agree with you .
I feel like a roller would do the trick just as fast.
Either way painting sucks.
@@zac2384 facts
So there are metal bits in the oil pan and all you say/do is: the engine is not hurt?
did you even check everything properly? and y'all know why it was so low on power yet? [did i miss something]?
I found a nut above the intake valve on a Toyota motor. The bolt was all chewed up and the car still ran 😅 just sent it
Video #1 of saying I will pay $100 for Dj to take an iq test and post the results
Crazy thing is I believe he’s not that dumb. But he plays the role good.something like “Rage Bating”
Yo fk that home depot. They forced you to buy a faulty paint sprayer. Only because the guy didn't want to do the paper work. Take that broken sprayer back 🤣🤣
As a painter my self, I hate the sprays. Cut and roll for life. You get way more paint on the walls rather than a super super thin layer from the sprayer. Plus you spend more time setting up than actual painting.
Use the ole "give a man a fish and you feed him for a day, teach him how to fish you feed him for a lifetime" on Brian one time
Yall did great tho I remodel for a living and yeah the pro one day primer and paint and please don’t cover the floor get them sanded and stained
Feds called, they wanting those income taxes.
Brian was on one in this video 😂 i couldn’t stop laughing
Your Dad was exactly right they wont rent spray rigs to ppl that aren't painters because you wont clean it properly that's what they think you just lack the experience
i break in my clutches never have an issue :^), he'll learn eventually
BRIANS COMPETITION HAHAHAHA LMAO
save money and just refinish the floors. you need to buy base boards anyways
Hey Dj I install flooring for a living do yourself a favor stay away from lvt flooring go with Mohawk rev wood it’s a much better product
Brian jacked that paint job up! 😂😂 😂
Bro you put it back together without even looking at anything?!
You aren’t even curious what that spring is from ? Or the metal?
DJ, you ever heard of scuffed realtor? hes local to CT.
hello john stupid here
So the car runs like shit/makes no power and you find metal in the oil pan but you decide to just throw a gasket kit in it and paint block and call it good?
White block! Lol "you fool!"
Nice to see dj with a tyvec suit on day2.😂 Bro got home and realized he ruined his clothes and shoes hHa
She looks modest in that white suit, keep it up dj
Comment section always makes me laugh no matter what the content is always a handful of know it all professionals lol. I would definitely have covered the floors vinyl over those floors no way
Have a professional sand, stain, and put clear polyurethane those floors. They will be beautiful!
Can confirm, painting sucks. I promised myself I’d never paint another house interior again 😂
You'd have that whole house painted out in like 4hrs with a airless.
Yep that bolt was having one hell of a time
I think it would have been worth it to buy the cheaper graco unit that lets you put the tube right into the bucket, they are only like $250 and work a lot better, and you don't have to hold all the paint in your hand.
That rental company lied go to another one you need a airless paint gun or just buy one there not that expensive good work on the house mic an dj
ant should just use dj´s card to buy new turbo for 13 cuz that old one looks like its from 70´s
Sugar we're going dowm-fallout boy popped into my head the second you said masuleom or however its spelt
*down
damn, i wish was able to afford a house.. be fun to do this work congrats!
No texture?
Paint match is 🔥
You should go to New Jersey and try to find some ufo 🛸 Drone whatever that are
Man i could've painted a room faster than that thing would take for a wall
DJ that's a stirrer not a shaft 😵🤣😅
The pieces in the engine is someone sabotaging your program
Candy purple valve cover asap
I must’ve missed that 😂😂😂
Sand the floors and recoat don’t cover up u will regret it trust me!!
Interesting finds
Roller and brush my brother
Dj and gang, y'all rock! Can't wait to see the Porch. Peace 🤘 💨💨💯
Keep the floors. Good hardwood is so nice, and I'm a carpet over everything kinda guy. My feet are sensitive,.I wear shoes even in an Asian house if they got tile...sorry not sorry!
I got nice shoes thou...lol
Don’t raffle the civic! Keep it!
Dumbest thing is to cover those nice hardwood
You would have been better off just buying a real sprayer
👍🏽👍🏽
List of all buying digital download.😢 bet nobody.
You better change that head gasket. You had problems on the dyno. Think about making it better an not the same. An listen to ant. Buy a turbo cheap ass.
Iam a pro do it fo live in well well.
Algorithm
Comment
Ggfllkpptrrtrrwcctfc
Car stuff starts @ 8:25... Not sure why you're showing your girls house.
bc we are here for the real shit.. not just the car shit DAWGG yu dig?
Because it’s a channel about his life like your offended by it
The random shenanigans do hit ngl 🤷♂️😭
Once the house is finished we gonna have a wedding!
I was about to comment t the same thing. Wtf is this clown doing.. his hoe of a misses doesn't interest me at all, show the car stuff or stop uploading mate
Sup blood 😂
never broken in a clutch never had issues
couple times through the gears on the stands/lift then beat the shit out of it
make sure the pedal is adjusted propper should have a 1/4 inch of freeplay and make sure the slave is not keeping pressure on it i have had a 240 slave have a rod that was 2 long and basically had to put pressure on the clutch to get it bolted up and the cluch slipped in high rpm ground the rod down some and good to go